Rural Development And Panchayat Raj Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RDPR/2022-23/BD/WORK_INDENT97114Tender No
RDPR/2022-23/BD/WORK_INDENT97114Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
31.89
-
7908.72
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent as per directions of Engineer-in-charge.
68.97
-
109524.36
11.37.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in m2 1,226.00 basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/ m�) including cost of materials, labour, usage charges of machinery complete as per specifications. as per directions of Engineer-in-charge.
59.88
-
73412.88
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications.as per directions of Engineer-in-charge.
4
-
8944
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
684.86
-
93140.96
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m� as per directions of Engineer-in-charge.
84.6
-
67257
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Light shade pigment using white cement
5.76
-
37802.88
Providing and laying Sand - M-Sand –Fine (Material components) as per directions of Engineer-in-charge.
16.76
-
24938.88
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. as per directions of Engineer-in-charge.
223.4
-
246186.8
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. as per directions of Engineer-in-charge.
54.42
-
53005.08
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
3.6
-
2682
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
5.76
-
20050.56
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
159
-
91902
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.
4.13
-
1961.75
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with one side prelam as per directions of Engineer-in-charge.
15
-
42840
Repairing door and window frames with available wood to the required size.
28.35
-
21432.6
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.as per directions of Engineer-in-charge.
0.08
-
6027.52
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) as per directions of Engineer-in-charge.
10.08
-
51145.92
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid as per directions of Engineer-in-charge.
6
-
30030
Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as per directions of Engineer-in-charge.
4
-
16984
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern as per directions of Engineer-in-charge.
8
-
44072
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including oper- ated levers as per directions of Engineer-in-charge.
5
-
16930
Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tapas per directions of Engineer-in-charge.
5
-
18650
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. as per directions of Engineer-in-charge.
10
-
9710
KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 as per directions of Engineer-in-charge.
1000
-
8460
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore Push Taps as per directions of Engineer-in-charge.
20
-
6520
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinations andcuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, withall labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to therequired pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: as per directions of Engineer-in-charge.PVC pipes 25mm dia, 10 kg/sqcm & class 5 as per directions of Engineer-in-charge.
50
-
2350
PVC pipes 110mm dia., 6 kg/sqcm & class 3 as per directions of Engineer-in-charge.
50
-
19700
Providing Cement mortar 1:6 (1 cement : 6 fine sand) including cost of all materials, labour and usage charges of machinery complete as per the direction of engineer incharge of work.
4.8
-
18888
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. as per directions of Engineer-in-charge.
100
-
74500
Supplying, installing, testing and commissioning of solar Hot Water Heater comprising of solar flat plate collector pf size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriete capacity elecrtical back up arrangement excluding inlet and outlet pipes. 200ltr Capacity as per directions of Engineer-in-charge.
2
-
78000
Supplying, and drawing Flexible Multicore Cable manufactured with elecrolyte grade flexible copper with low conductor confirming to table 3 class of 5 of IS:8130-1984 and (Virgin) PVC Insulation and sheated for working voltage up to 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A
280
-
105112
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Size of Tile 600x600 mm as per directions of Engineer-in-charge.
333.4
-
35007
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m�) over and including priming coat of exterior primer applied @ 2.20kg/10 m� to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
262.5
-
54600
SUBMERSIBLE PUMPSET :- Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP 3.00 HP - 120 LPM @ 55 m = 5 STG Outlet Dia - 2.00” as per directions of Engineer-in-charge.
1
-
29953
SUBMERSIBLE CABLE :- Supply and delivery of Brand new best make P.V.C. insulated cable of flat 3 core (sheathed) of nominal cross area 1.5, 2.5, & 4 mm, confirming to I.S : 694-1977 with latest amendments with ISI. mark, as provided in b) 1x3x2.5 Sq.mm as per directions of Engineer-in-charge.
160
-
9280
Providing and fixing chorinated poly venyl chloride (CPVC ) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittimgs including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall ) (PWD SR 2018-19 Pno.105 I. No.13.85.5 ) 40mm nominal OD pipes.
160
-
49600
Electrical work POINT WIRING USING COPPER WIRE WITH SWITCH : Supplying and wiring adopting loop system in existing PVC conduit / casing caping using Copper PVC insulated multi stand 2x1.5 sqmm. copper wire with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box , the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each outlet pointing wiring using class A materials Long point above 6 Mtr. Upto 10 Mtr. From tapping point to outlet via switch with all lead and lifts as per direction of Engineer-in-charge of the work as per directions of Engineer-in-charge.
10
-
3630
Supplying box type suitable for 28 W Ts single / twin lamp & suspension mounted luminaire & opticle reflector . Prewired with HF electronic Ballast , push fit type lamp holdered & main connectors . Channel cover shall be made of CRCA MS sheet and finishing is done with stove enemeled white with end caps made of engineering plastic. 1x4-28 wattsas per directions of Engineer-in-charge.
10
-
9900
Supplying box type fluorescent tube light fitting of 4-36/40 watts fluorescent tube fitting, made out of MS. Sheet and stove enamelled with low loss open construction copper wound ferromagnetic ballast, starter, locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 volts A.C Supply including fluorescent tube. (b) Group "A" with all lead and lift as per direction of Engineer-in-charge of the work. as per directions of Engineer-in-charge.
10
-
10800
Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc., for operation on 230 volts 50 cycles single phase AC supply confirming to ISS 374-1979 and with double bal bearing system I 48 Sweep (1200mm) Regular model a (Khaitan , Crompton Greaves, Orient, Polar, Bajaj, Usha, Havels, Almonard) with all lead and lift as per direction of Engineer-in-charge of the work. as per directions of Engineer-in-charge.
6
-
10800
Fixing all types and all capacities fluorescent/ false ceiling/spot light/CFL fittings indoor on the wall / ceiling / rafters / grinders using 23/0.0076'' twin twisted PVC insulated wires, required nos of round blocks and clamps (if required ) (a) on wall / ceilling Rafter / girders with all lead and lifts as per direction of Engineer-in-charge of the work. as per directions of Engineer-in-charge.
5
-
525
Supplying and fixing polised wood board made of not less than 15 mm thick plank on both sides with planks made out of not more than 2 Pieces and fixing the same to the wall using tapered inverted wooden plugs, screws etc 200 x 150 x 40mm (8"x6"x1.5") with all lead and lifts as per direction of Engineer-in-charge of the work. 300 x 300 x 50mm (12'' x 12" x 2") as per directions of Engineer-in-charge.
10
-
1530
Supplying and fixing PVC casing and caping on the wall or ceiling using necessary materials like bends, screws at an interwal of 300mm etc., complete -do- 25mm PVC casing caping. with all lead and lifts as per direction of Engineer-in-charge of the work as per directions of Engineer-in-charge.
50
-
1300
Wiring for lighting /power circuit using one of PVC insulated 1100 v grade and copper conductor single core cable in open or concealed system of wiring I Group "A" materials, b) 1.5 sqmm + 2.5 sqmm with all lead and lifts as per direction of Engineer-in-charge of the work.Electric steped Regulator etc., complete. as per directions of Engineer-in-charge.
50
-
1250
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements