Rural Development And Panchayat Raj Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,25,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RDPR/2022-23/BD/WORK_INDENT89754Bid Award Id
ViewTender No
RDPR/2022-23/BD/WORK_INDENT89754Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Easing of shutters of door. including cost of materials, labour, HOM complete as per specifications.
1
-
91.35
... More
Ground Floor: KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
202.25
-
63496.39
... More
KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5
22.47
-
10593.48
... More
KSRB 2.14-1 : Extra for additional lift of 1.5 m. or part thereof for excavation in loose / soft or hard soil including cost of materials, labour complete as per specification.
65.02
-
1365.42
... More
KSRB 4 - 1.2 Providing and laying position plain cement concrete of mix 1:3:6 using 40mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 15cms thick, well compactedl, in foundation and plinth, inlcuding cost of all materials, laobur HOM of machinery, curing complete as per specification specification No. KBS 4.1, 4.2
37.25
-
212646.84
... More
KSRB 5.1-3 : Providing and constructing granite / trap / basalt rubblestone masonry in foundation with cement mortar 1:6 ( uncoursed),bond stones at two m. apart in each course including cost of materials,labour, curing complete as per specifications.KBS 5.1.13
24.84
-
92017.3
... More
KSRB 5-3.3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13
22.66
-
139403.19
... More
KSRB 15.1.3 : Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications.
6.45
-
967.37
... More
KSRB 2.3 : Filling available excavated earth(excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5m. including cost of all labour complete as per specifications.
222.92
-
47047.27
... More
KSRB 2.5 : Excavation ( in deposited soil ) and filling sides of foundation upto plinth in layer not exceeding 20 cms. In depth, compacting each deposited layer by ramming after watering with lead upto 50m. And lift upto 1.5m. Including cost of all labour complete as per specifications.
101.77
-
43063.98
... More
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
37.87
-
240521.46
... More
KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
51.65
-
340677.72
... More
KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
17.12
-
7963.37
... More
KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
7.53
-
45414.94
... More
KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications.Specification No KBS 4.6.2 Page No. 15, Item No.4.28
52
-
14359.8
... More
KSRB 4.6.5 Providing and removing centering , shuttering , strutting, propping etc, for columns , pillers piers, abutments, and struts, squar/rectangular polygon in plan including cost of all materials , labour complete as per specification specification no.KBS 4.6.2
133.2
-
63776.16
... More
KSRB 4-6.7 : Providing and removing centering, shuttering, strutting, propping etx., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2
147.88
-
45340.01
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies ad likes, thickness upto 200 mm including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2 .
186.69
-
88015
... More
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
12.07
-
10366.92
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
117.73
-
44501.94
... More
KSRB 4.6.10 Providing and removing centering , shuttering , strutting, propping etc, for chejjas, carbels etc., including edges including cost of all materials , labour complete as per specification
22.89
-
7907.35
... More
KSRB 4-6.11 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for stairs (excluding landing) except spiral staircase including cost of all materials, labour complete as per specification.Specification no KBS 4.6.2
17.68
-
10321.58
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications.Specification no KBS 4.6.3
7.703
-
688689.41
... More
KSRB 6-1.3 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructu/re including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.7
65.31
-
367427.53
... More
KSRB 6-7.4 : Construction of partition wall 11.2 cms thick with non-modular ground moulded burnt bricks of class designation 5.0 Newton per sqmm with cement mortar 1:4 including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2
50.18
-
46260.94
... More
KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications. specifications no KBS 9.33
0.0848
-
15460.55
... More
KSRB 9.5-1 : Providing and fixing in position fully panelled Teak wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180 mm wide top rail and styles 100mm wide as per drawing and panels of 25 mm thick including cost of materials, labour, HOM of machineries complete as per specifications. (excluding cost of fixtures ). specifications no KBS 9.34
4.32
-
36219.96
... More
KSRB 15-17.12 : Providing and applying polishing with french polish on new wood surface and / or wood based surface to give an even surface after cleaning the surface of all dirt, dust and foreign matter, sand papered smooth, including cost of wood filler and materials, labour complete as per specifications.
10.37
-
2199.48
... More
KSRB 9.4-4 : Providing WHITE Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33
0.33
-
21369.35
... More
KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
8
-
11508
... More
KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34
15.75
-
84688.54
... More
Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM) U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement on 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/Plaster of Paris with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame.Note:
40.5
-
23388.75
... More
SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15x15mm for top & bottom rails, covered with heat moulded PVC channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 m.m Aluminium hinges.
13.23
-
38576.7
... More
Providing & fixing of glazed 3 track -2panel sliding windown with mesh made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with GI throughtout the window, the sliding outer frame having a overall size of 108x45mm with reinforcement of 1mm thickness, sash with overall size of 39x58mm with reinforcement of 1.5mm thickness, mesh sash of overall size 30x48.5mm reinforcement with 1.5mm of GI, Glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. Fiber glass mesh shall be provided in mesh shutter, windows shall be provided with 5mm plain float glass, standard hardware and single point locking system of flush lock wall thickness of frame, mullion & sash shall be 2-2.2mm.
12.6
-
65051.91
... More
Providing & fixing of glazed Openable Window made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanixed iron profiles throuhout the window. The outer frame having a overall size of 60x55 mm with reinforcement of 1 mm thickness, mullion with overall size of 74x60 mm with reinforcement of 1 mm and sash with overall size of 75x60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34x20 mm and coextruded with gasket. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system of flush lock, Wall thickness of frame, mullion & sash shall be 2-2.2 mm.
1.89
-
7207.7
... More
KSRB 7.9 : Providing and fixing M.S. grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combinatioon of M.S. flats and square as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification no KBS 7.12,
428.09
-
42701.98
... More
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
677.74
-
154423.06
... More
KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
259.37
-
65361.24
... More
KSRB 15.3.13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
164.61
-
40271.84
... More
Providing grooves in plastering on walls 25 to 40mm wide and to the required depth as per design and finished in cement mortar (1:4) including all labours, materials, centering, scaffolding, curing etc complete as directed by PMC/EIC.
185.2
-
3879.94
... More
Providing applying coats of wall putty to inside plastered walls and ceiling using cement putty.Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers,including cost of all materials,cost of labour and scaffolding etc.,complete as per specification.
842.36
-
68989.28
... More
KSRB 4-2.12 ; Extra for providing throating or drip moulding to RCC chajja with plastering (labour charges only ) as per specification. Specification No. KBS
29.4
-
1018.71
... More
KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
842.36
-
79603.02
... More
KSRB 15-15.2 : Extra over item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications.
164.61
-
1382.72
... More
Providing and finishing external walls in two coats over one coat of primer with plastic emution paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.
207.49
-
19607.8
... More
KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.
13.61
-
714.52
... More
KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.
13.61
-
1386.18
... More
KSRB 15-18.3 : Providing and applying enamel metal paint one coat (excluding priming coat ) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
20.39
-
2033.9
... More
Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli gray granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of curing - minimum width of 900mm.
72.51
-
150367.61
... More
Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc , Complete as per specification.
127.7
-
119737.9
... More
KSRB 14.14-5 : Providing Ceramic tiles of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12 mm thick, cemetn mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost of materials, laobur, curing, of size 30x30cms 6mm thick complete as per specifications(Item No 14.36.2 )
17.98
-
22805.83
... More
Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification
45.2
-
12814.2
... More
KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
51.13
-
10790.99
... More
KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x60 cms 6mm thick with border of size 30 x 10 cms
63.55
-
108765.82
... More
Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged.
12.15
-
68609.83
... More
Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and ensured that it is in line and level. The textured material is then mixed with 40-50% of clean water until a homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react completely with ingredients. The textured finish prepared as above is then applied to the wall surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired finish. The finished surface shall be applied with two coats of exterior apex paint of approved shade. The rate includes providing and removing scaffolding, all lead and lift and all other incidental charges etc., complete as per directions of the Engineer-in-charge of the work.
51.87
-
23909.48
... More
0256 M.S handles oxidised 15cms - 15cms
20
-
1101.6
... More
0188 Hinges 5" heavy duty
40
-
1254.4
... More
0038 Bottom lock nail
10
-
398.3
... More
0178 Handles powder coated 150mm
20
-
1017
... More
0427 Tower bolt 300mm long
20
-
2033.8
... More
0540 Screws
80
-
271.2
... More
0220 Locking arrangements
10
-
5508.5
... More
First Floor:- KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
32.81
-
218478.18
... More
KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
10.98
-
5164.99
... More
KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
1.51
-
9217.46
... More
KSRB 4.6.5 Providing and removing centering , shuttering , strutting, propping etc, for columns , pillers piers, abutments, and struts, squar/rectangular polygon in plan including cost of all materials , labour complete as per specification specification no.KBS 4.6.2 item no.4.32 page no.15
78.94
-
37796.47
... More
KSRB 4-6.7 : Providing and removing centering, shuttering, strutting, propping etx., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2
87.01
-
26677.27
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies ad likes, thickness upto 200 mm including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2 .
121.54
-
57300.03
... More
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
8.13
-
6982.86
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
13.17
-
4978.26
... More
KSRB 4.6.10 Providing and removing centering , shuttering , strutting, propping etc, for chejjas, carbels etc., including edges including cost of all materials , labour complete as per specification
14.82
-
5119.57
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications.Specification no KBS 4.6.3
3.5425
-
322260.87
... More
KSRB 6-1.3 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructu/re including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.7
43.13
-
245362.26
... More
KSRB 9.4-4 : Providing WHITE Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33
0.06
-
3885.34
... More
KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
1
-
1438.5
... More
KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34
3.6
-
19357.38
... More
KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.
8.64
-
453.6
... More
KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.
8.64
-
879.98
... More
Providing & fixing of glazed 3 track -2panel sliding windown with mesh made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with GI throughtout the window, the sliding outer frame having a overall size of 108x45mm with reinforcement of 1mm thickness, sash with overall size of 39x58mm with reinforcement of 1.5mm thickness, mesh sash of overall size 30x48.5mm reinforcement with 1.5mm of GI, Glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. Fiber glass mesh shall be provided in mesh shutter, windows shall be provided with 5mm plain float glass, standard hardware and single point locking system of flush lock wall thickness of frame, mullion & sash shall be 2-2.2mm.
9.24
-
47704.73
... More
KSRB 7.9 : Providing and fixing M.S. grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combinatioon of M.S. flats and square as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification no KBS 7.12,
926.1
-
92378.48
... More
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
158.67
-
37152.58
... More
KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
220.06
-
58227.88
... More
KSRB 15.3.13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
108.76
-
27293.32
... More
Providing grooves in plastering on walls 25 to 40mm wide and to the required depth as per design and finished in cement mortar (1:4) including all labours, materials, centering, scaffolding, curing etc complete as directed by PMC/EIC.
211.16
-
4423.8
... More
Providing applying coats of wall putty to inside plastered walls and ceiling using cement putty.Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers,including cost of all materials,cost of labour and scaffolding etc.,complete as per specification.
267.44
-
23588.21
... More
KSRB 4-2.12 ; Extra for providing throating or drip moulding to RCC chajja with plastering (labour charges only ) as per specification. Specification No. KBS
15.2
-
526.68
... More
KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
487.5
-
48116.25
... More
KSRB 15-15.2 : Extra over item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications.
108.76
-
570.99
... More
KSRB 15-18.3 : Providing and applying enamel metal paint one coat (excluding priming coat ) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
44.1
-
4398.98
... More
Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli gray granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of curing - minimum width of 900mm.
105.15
-
218275.63
... More
KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
108.76
-
32432.23
... More
Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and ensured that it is in line and level. The textured material is then mixed with 40-50% of clean water until a homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react completely with ingredients. The textured finish prepared as above is then applied to the wall surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired finish. The finished surface shall be applied with two coats of exterior apex paint of approved shade. The rate includes providing and removing scaffolding, all lead and lift and all other incidental charges etc., complete as per directions of the Engineer-in-charge of the work.
44.01
-
20840.94
... More
KSRB 8.5 : Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.
3.6
-
7620.48
... More
KSRB15-4.1 Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortar 1:3, 12mm thick cost of materials complete as per specifications.
100.87
-
741.39
... More
Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The bottom & top member is provided with 50x50x6mm double equal angles, welded back to back and in between top & bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No.CBS/ SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments, etc., complete as per specification
350
-
48510
... More
PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.
59.72
-
43141.73
... More
Providing & fixing fixtures 0256 M.S handles oxidised 15cms - 15cms
2
-
110.16
... More
Providing & fixing fixtures 0188 Hinges 5" heavy duty
4
-
125.44
... More
Providing & fixing fixtures 0038 Bottom lock nail
1
-
39.83
... More
Providing & fixing fixtures 0178 Handles powder coated 150mm
2
-
101.7
... More
Providing & fixing fixtures 0427 Tower bolt 300mm long
2
-
203.38
... More
Providing & fixing fixtures 0540 Screws
16
-
54.24
... More
Providing & fixing fixtures 0220 Locking arrangements
1
-
550.85
... More
Water Supply Work: Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 20mm nominal OD pipes
35
-
8636.25
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 25mm nominal OD pipes
20
-
6153
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 50mm nominal OD pipes
20
-
9072
... More
KSRB13-6.1-2 : Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
6
-
1089.9
... More
KSRB13-6.2-1 : Providing and fixing in position brass stop cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
2
-
296.1
... More
Providing and fixing soap dish including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. With all lead and lifts as per the directions and instructions of the engineer in charge of work
2
-
30
... More
KSRB13-6.3-1 : Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 / 13.3
2
-
571.2
... More
KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22
1
-
7169.4
... More
KSRB13-9.5 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9
20
-
8925
... More
KSRB13-9.7 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9
15
-
9371.25
... More
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM of acquirements and testing complete as per specifications. - 160mm dia
30
-
26869.5
... More
KSRB13-7.2-1 : Providing and fixing in position 25mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.10 / 13.13
2
-
997.5
... More
Supplying and fixing of 2/1.5 HP Monoblock pump of approved make with all accessories conforming to ISI specification including cost of all materials, labour, with all lead and lift etc., complete as per direction of the Engineer in charge of th work
1
-
11443.95
... More
Construction of UG Sump:- KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
5.94
-
1864.86
... More
KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5
6.53
-
3078.57
... More
KSRB 2.14-1: Extra for additional lift of 1.5m. or part thereof for excavation In loose / soft or hard soil including cost of materials, labour complete as per specifications.
3.56
-
74.76
... More
KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
0.5
-
2684.85
... More
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6
3.097
-
18795.69
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500
0.34
-
25099.6
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification. Specification No. KBS 4.6.2
4.14
-
1951.8
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
25.84
-
9767.52
... More
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
20.18
-
4598.01
... More
KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
20.18
-
1907.01
... More
Plumbing Work: KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
13.5
-
4238.32
... More
KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11
3
-
15611.4
... More
KSRB 11-2 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11
3
-
13305.6
... More
KSRB 11-11.5 : Providing and fixing white vitreous china clay, flat back wash basin size 450x300mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11
2
-
5894.7
... More
KSRB 11-17.2 : Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications.
2
-
1415.4
... More
KSRB 11-15.3 : Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications.
2
-
2385.6
... More
KSRB13-6.1-1 : Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
2
-
399
... More
Providing and fixing CP health faucet with flexible hose CP 2 way Bib cock wall flange supporting hook with screws fixing materials and sealant to all side of wall flange etc., complete
2
-
4880
... More
Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 10cms x 7.5cms
2
-
525
... More
Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 12.5cms x 7.5cms
12
-
3591
... More
Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 450x450mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 450x450mm
2
-
11130
... More
Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 600x600mm
1
-
8934.45
... More
Soak Pit:- KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
20.27
-
6363.77
... More
KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5
2.25
-
1060.76
... More
KSRB 5-1.1 : Providing and constructing granite / trap / basalt rubble stone masonry in foundation with mud mortar (uncoursed), bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.12
9.49
-
23177.43
... More
KSRB 2.6 : Providing and filling sand in foundation upto plinth to required depth for sub soil treatment including watering ramming with all lead and lift complete as per specifications.specification. No. KBS 2.10.2
3.98
-
7409.37
... More
Providing and fillinf brick aggregate 25 mm (Nominal)
5.96
-
3712.36
... More
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6
0.98
-
5947.62
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification. Specification No. KBS 4.6.2
7.55
-
3559.45
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500
0.06
-
4429.34
... More
Waste Water Outlet Pipe
3.2
-
1868.16
... More
Electrical Work: Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused waysof junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherevernecessary 19/20mm dia 2mm thick
400
-
16800
... More
Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused waysof junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherevernecessary 25mm dia 2mm thick
100
-
5565
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 75x75x65mm
6
-
548.1
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 100x75x65mm
7
-
646.8
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 180x90x65mm
4
-
399
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 200x90x65mm
6
-
699.3
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 200x200x65mm
2
-
304.5
... More
Supplying and fixing PVC/metal conduit Deep junctionbox 19/20mm deep junction box
10
-
451.5
... More
Extra for Groove cutting in brick wall/CC floor to the suitabledepth for concealing of Conduit/GI pipe and plastering,finishing upto wall surface complete upto 50mm conduit in brick wall
30
-
661.5
... More
Supplying And Fixing Metal Fan Box with Round Hook.
14
-
1249.5
... More
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. Short point upto 3Mtr from tapping point to out let via switchbox
25
-
4200
... More
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box
18
-
4725
... More
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. Long point above 6Mtr upto 10Mtr from tapping point to outlet via switch box
6
-
2362.5
... More
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:confirming to latestamendments. 1.5 sqmm
250
-
5380
... More
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:confirming to latestamendments. 2.5 sqmm
900
-
30240
... More
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:confirming to latestamendments. 4 sqmm
80
-
3780
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 1 to 3 Module
6
-
693
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 4 Module
7
-
918.75
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 8 Module
4
-
840
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 10 Module
6
-
1449
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 12 Module
2
-
567
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 6Amps one way Switch
35
-
2572.5
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 6Amps Two way Switch
2
-
199.5
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. Stepped Fan Regulator.
14
-
4263
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 16Amps one way switch
2
-
241.5
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 32Amps DP switch
1
-
191.1
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 6/16Amps universal socket
10
-
1701
... More
Supplying and fixing 32Amps security and energy savingDP switch with key tag suitable to operate on 230 Volts,50Hz AC supply & completely wired on existing box.
1
-
714
... More
Supplying fully automatic star-delta starter unit push buttontype with suitable wires, 3 contactors, one adjustablethermal timer mounted on a common base plate held in steelenclosure for use on 400/440 volts 3 phase and wired afterfixing to the existing wooden board for motor. Upto 12.5 HP
1
-
6720
... More
Supplying & fixing of Porcelain fuse channel with cut outon existing wooden/panel using necessary nuts, bolts andwashers. 32Amps
1
-
182.7
... More
Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898. 6-32Amps SP
1
-
455.7
... More
Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898. 6-32 Amps DP
1
-
954.45
... More
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. II - Double Door 8Way SP &N
1
-
1522.5
... More
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. II - Double Door 12Way SP &N
1
-
1890
... More
Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital readout ofpercentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flushmounting on panel board.
1
-
8085
... More
Supplying 250 amps rated 3phase with neutral bus barusing required capacity electrolytic aluminium strips coveredwith heat shrinkable coloured PVC sleeve, mounted onphenolic/FRP/DMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminium Strips
1
-
2992.5
... More
Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and -CT operated meterin polycarbonate body in class 0.5 accuracy as per IS 14697and completely wired.
1
-
3832.5
... More
Supplying, fixing, wiring, earth electrode for groundingconduits, I.C. cutouts and other equipment's on the meterboard using 40mm dia 2.90mm thick GI pipe 2.5 mtrlong buried in a pit … The pit should be filled with equalproportion of salt and charcoal 150mm all-round the pipe tocomplete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per ISIspecification 7.3.3. of IS 732 using 12mm dia bolts, nuts,washers and check nuts etc., the pipe shall have 16 throughholes of 12 mm dia
1
-
3149.68
... More
Supplying of 1.1 KV LT UG cable XLPE or Heat resistantPVC insulated, PVC extruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouringstrip thickness in average +5% and resistivity 14 Ohms/Kms(Max) as per IS-3975 3.5 core 25 sqmm
10
-
1890
... More
Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supplycomplete. 12" Sweep (300mm)
6
-
13230
... More
Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model
14
-
30723
... More
Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burninghours & 70% lumen maintenance with CRI > 80. PowerInput: 220-240V @ 50/60Hz & Power factor >0.9 along withCE approved. 2 years Warranty against any manufacturingdefect working under standard electrical condition LED light fighting 1 x4'- 20/22 w
12
-
4725
... More
Supply of round/square recess/surface mounted rollingtype LED Down light with .......W GU 10 LED Lamp RibFabricated from Die cast aluminium with white powdercoated prewired to mains connector & has swiveling unit ofaluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70%lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect workingunder standard electrical condition LED square or round down light 10-12W
8
-
6451.2
... More
Supplying and fixing of 5'-80 Watts of T8 Fluorescent Tubewith 54W power consumption with low 3mg Mercury contentless phosphor coating. Operating voltage range from 180Vto 265V, 50Hz AC power Supply
20
-
9870
... More
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin
10
-
1113
... More
Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders
40
-
4620
... More
Fixing a ceiling / wall mounting fan of all capacities and alltypes, with necessary clamps and 'S' hook made out of 15mmdia MS rod, with 5 amps. ceiling rose of approved qualitywith necessary length of 23 / 0.0076 inch PVC insulated twintwisted wire of approved quality, mounted on a suitable sizewooden board and wired.
14
-
3822
... More
Fixing all types and all capacities of 1'x4' / 2'x2' LED Lightfittings indoor on the wall / ceiling / rafters / girders withnecessary supporting frame, using 23/0.0076” twin twistedPVC insulated wires, required Nos of round blocks andclamps.
6
-
2835
... More
Furnishing Work: FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgebinding table top) Side Table : 900 mm W x 450mm D X 750 mm ht
4
-
50232
... More
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard drapery hangers, curtain rods with end brackets, openable shutters with 19mm x 6mm thick plain teak wood beading, lipping 1.5mm thick commercial ply vertical support finished in approved 1mm lamination sheet of approved colour, shade and quality on all exposed surfaces. Inner surface painted with 2 coats of white synthetic enamel paint over 2 coats of Patti, one coat of wood primer, including cost of brass fittings, parliamentary hinges, C handles, tower bolts, magnetic catches, approved brand lock, adhesives, synthetic resins, nails, screws etc., complete including cost of all materials, labour charges, complete as per specification.
5.52
-
62318.59
... More
Providing and fixing storage unit of 0. r5m depth made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification.
9.9
-
135862.65
... More
STRAIGHT WORKSTATION (Frame) Providing and fixing STRAIGHT WORKSTATION ( Frame ) consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm w) and one soft board ( 600 mmw ) per workstation,Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway ( 600mmW ) below table top per workstation and continous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table,Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table joint plate., as per specifications , drawings and as directed by Engineer in charge Sharing workstation Non Sharing workstation 2C) Size : 1200 mmW x 600mm D x 1200 mm ht (Non Sharing-Edgebinding table top): single unit
3
-
45171
... More
Meeting table -wooden Providing and fixing meeting table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 2400 mm Dia X1200 mm D X 750 mm Ht (12 seater)
1
-
21000
... More
Storage Unit - wooden - One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks,Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge PLY STORAGE 900 mm W X 430 mm D X 2100 mm Ht
3
-
55685.7
... More
Providing and fixing executive chairs push back type with seat and back upholstered. The chair frame and support to be powder coated M.S Steel frame with padding on seat and back with moulded rubber foam. The chair to be finished in stain and fire resistant synthetic fabric as per approved sample and shade. Entire work to be done as per specifications and direction of Engineer - in-charge and architect's / consultant's / PMC directions. The seat is compeletely foldable to the 90 degrees with MS frame grouted to the floor with anchor bolts.
4
-
30000
... More
Providing and fixing Visitors and staff chairs push back type with seat and back upholstered. The chair frame and support to be powder coated M.S Steel frame with padding on seat and back with moulded rubber foam. The chair to be finished in stain and fire resistant synthetic fabric as per approved sample and shade. Entire work to be done as per specifications and direction of Engineer - in-charge and architect's / consultant's / PMC directions. The seat is compeletely foldable to the 90 degrees with MS frame grouted to the floor with anchor bolts.
6
-
33000
... More
Providing and fixing perforated metal visitors chairs - SS Finish
1
-
7000
... More
Construction of Grama Panchayath Building (Grama soudha) at HK Halli:- KSRRB M200-24. Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials stacking serviceable and unserviceable materials seperately complete as per specifications. MORTH Specification No. 202
7.59
-
7164.58
... More
KSRRB M200-15.2. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. iii) Dismantling Stone Masonry.B. Rubble stone masonry in cement mortar. MORTH Specification No. 202
3.89
-
1433.66
... More
KSRRB M200-14.2. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. ii) Dismantling brick/Tile work B. In cement mortar. MORTH Specification No. 202
6.96
-
2565.11
... More
Easing of shutters of door. including cost of materials, labour, HOM complete as per specifications.
6
-
548.1
... More
Ground Floor: KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
202.25
-
63496.39
... More
KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5
22.47
-
10593.48
... More
KSRB 2.14-1 : Extra for additional lift of 1.5 m. or part thereof for excavation in loose / soft or hard soil including cost of materials, labour complete as per specification.
65.02
-
1365.42
... More
KSRB 4 - 1.2 Providing and laying position plain cement concrete of mix 1:3:6 using 40mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 15cms thick, well compactedl, in foundation and plinth, inlcuding cost of all materials, laobur HOM of machinery, curing complete as per specification specification No. KBS 4.1, 4.2
37.25
-
212646.84
... More
KSRB 5.1-3 : Providing and constructing granite / trap / basalt rubblestone masonry in foundation with cement mortar 1:6 ( uncoursed),bond stones at two m. apart in each course including cost of materials,labour, curing complete as per specifications.KBS 5.1.13
24.84
-
92017.3
... More
KSRB 5-3.3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13
22.66
-
139403.19
... More
KSRB 15.1.3 : Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications.
6.45
-
967.37
... More
KSRB 2.3 : Filling available excavated earth(excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5m. including cost of all labour complete as per specifications.
222.92
-
47047.27
... More
KSRB 2.5 : Excavation ( in deposited soil ) and filling sides of foundation upto plinth in layer not exceeding 20 cms. In depth, compacting each deposited layer by ramming after watering with lead upto 50m. And lift upto 1.5m. Including cost of all labour complete as per specifications.
101.77
-
43063.98
... More
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
37.87
-
240521.46
... More
KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
51.65
-
340677.72
... More
KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
17.12
-
7963.37
... More
KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
7.53
-
45414.94
... More
KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications.Specification No KBS 4.6.2 Page No. 15, Item No.4.28
52
-
14359.8
... More
KSRB 4.6.5 Providing and removing centering , shuttering , strutting, propping etc, for columns , pillers piers, abutments, and struts, squar/rectangular polygon in plan including cost of all materials , labour complete as per specification specification no.KBS 4.6.2
133.2
-
63776.16
... More
KSRB 4-6.7 : Providing and removing centering, shuttering, strutting, propping etx., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2
147.88
-
45340.01
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies ad likes, thickness upto 200 mm including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2 .
186.69
-
88015
... More
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
12.07
-
10366.92
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
117.73
-
44501.94
... More
KSRB 4.6.10 Providing and removing centering , shuttering , strutting, propping etc, for chejjas, carbels etc., including edges including cost of all materials , labour complete as per specification
22.89
-
7907.35
... More
KSRB 4-6.11 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for stairs (excluding landing) except spiral staircase including cost of all materials, labour complete as per specification.Specification no KBS 4.6.2
17.68
-
10321.58
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications.Specification no KBS 4.6.3
7.703
-
688689.41
... More
KSRB 6-1.3 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructu/re including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.7
65.31
-
367427.53
... More
KSRB 6-7.4 : Construction of partition wall 11.2 cms thick with non-modular ground moulded burnt bricks of class designation 5.0 Newton per sqmm with cement mortar 1:4 including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2
50.18
-
46260.94
... More
KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications. specifications no KBS 9.33
0.0848
-
15460.55
... More
KSRB 9.5-1 : Providing and fixing in position fully panelled Teak wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180 mm wide top rail and styles 100mm wide as per drawing and panels of 25 mm thick including cost of materials, labour, HOM of machineries complete as per specifications. (excluding cost of fixtures ). specifications no KBS 9.34
4.32
-
36219.96
... More
KSRB 15-17.12 : Providing and applying polishing with french polish on new wood surface and / or wood based surface to give an even surface after cleaning the surface of all dirt, dust and foreign matter, sand papered smooth, including cost of wood filler and materials, labour complete as per specifications.
10.37
-
2199.48
... More
KSRB 9.4-4 : Providing WHITE Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33
0.33
-
21369.35
... More
KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
8
-
11508
... More
KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34
15.75
-
84688.54
... More
Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM) U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement on 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/Plaster of Paris with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame.Note:
40.5
-
23388.75
... More
SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15x15mm for top & bottom rails, covered with heat moulded PVC channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 m.m Aluminium hinges.
13.23
-
38576.7
... More
Providing & fixing of glazed 3 track -2panel sliding windown with mesh made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with GI throughtout the window, the sliding outer frame having a overall size of 108x45mm with reinforcement of 1mm thickness, sash with overall size of 39x58mm with reinforcement of 1.5mm thickness, mesh sash of overall size 30x48.5mm reinforcement with 1.5mm of GI, Glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. Fiber glass mesh shall be provided in mesh shutter, windows shall be provided with 5mm plain float glass, standard hardware and single point locking system of flush lock wall thickness of frame, mullion & sash shall be 2-2.2mm.
12.6
-
65051.91
... More
Providing & fixing of glazed Openable Window made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanixed iron profiles throuhout the window. The outer frame having a overall size of 60x55 mm with reinforcement of 1 mm thickness, mullion with overall size of 74x60 mm with reinforcement of 1 mm and sash with overall size of 75x60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34x20 mm and coextruded with gasket. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system of flush lock, Wall thickness of frame, mullion & sash shall be 2-2.2 mm.
1.89
-
7207.7
... More
KSRB 7.9 : Providing and fixing M.S. grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combinatioon of M.S. flats and square as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification no KBS 7.12,
428.09
-
42701.98
... More
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
677.74
-
154423.06
... More
KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
259.37
-
65361.24
... More
KSRB 15.3.13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
164.61
-
40271.84
... More
Providing grooves in plastering on walls 25 to 40mm wide and to the required depth as per design and finished in cement mortar (1:4) including all labours, materials, centering, scaffolding, curing etc complete as directed by PMC/EIC.
185.2
-
3879.94
... More
Providing applying coats of wall putty to inside plastered walls and ceiling using cement putty.Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers,including cost of all materials,cost of labour and scaffolding etc.,complete as per specification.
842.36
-
68989.28
... More
KSRB 4-2.12 ; Extra for providing throating or drip moulding to RCC chajja with plastering (labour charges only ) as per specification. Specification No. KBS
29.4
-
1018.71
... More
KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
842.36
-
79603.02
... More
KSRB 15-15.2 : Extra over item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications.
164.61
-
1382.72
... More
Providing and finishing external walls in two coats over one coat of primer with plastic emution paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.
207.49
-
19607.8
... More
KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.
13.61
-
714.52
... More
KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.
13.61
-
1386.18
... More
KSRB 15-18.3 : Providing and applying enamel metal paint one coat (excluding priming coat ) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
20.39
-
2033.9
... More
Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli gray granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of curing - minimum width of 900mm.
72.51
-
150367.61
... More
Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc , Complete as per specification.
127.7
-
119737.9
... More
KSRB 14.14-5 : Providing Ceramic tiles of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12 mm thick, cemetn mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost of materials, laobur, curing, of size 30x30cms 6mm thick complete as per specifications(Item No 14.36.2 )
17.98
-
22805.83
... More
Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification
45.2
-
12814.2
... More
KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
51.13
-
10790.99
... More
KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x60 cms 6mm thick with border of size 30 x 10 cms
63.55
-
108765.82
... More
Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged.
12.15
-
68609.83
... More
Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and ensured that it is in line and level. The textured material is then mixed with 40-50% of clean water until a homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react completely with ingredients. The textured finish prepared as above is then applied to the wall surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired finish. The finished surface shall be applied with two coats of exterior apex paint of approved shade. The rate includes providing and removing scaffolding, all lead and lift and all other incidental charges etc., complete as per directions of the Engineer-in-charge of the work.
51.87
-
23909.48
... More
0256 M.S handles oxidised 15cms - 15cms
20
-
1101.6
... More
0188 Hinges 5" heavy duty
40
-
1254.4
... More
0038 Bottom lock nail
10
-
398.3
... More
0178 Handles powder coated 150mm
20
-
1017
... More
0427 Tower bolt 300mm long
20
-
2033.8
... More
0540 Screws
80
-
271.2
... More
0220 Locking arrangements
10
-
5508.5
... More
First Floor:- KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
32.81
-
218478.18
... More
KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification No. KBS 4.1, 4.6
10.98
-
5164.99
... More
KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
1.51
-
9217.46
... More
KSRB 4.6.5 Providing and removing centering , shuttering , strutting, propping etc, for columns , pillers piers, abutments, and struts, squar/rectangular polygon in plan including cost of all materials , labour complete as per specification specification no.KBS 4.6.2 item no.4.32 page no.15
78.94
-
37796.47
... More
KSRB 4-6.7 : Providing and removing centering, shuttering, strutting, propping etx., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2
87.01
-
26677.27
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies ad likes, thickness upto 200 mm including cost of all materials, labour complete as per specifications.Specification no KBS 4.6.2 .
121.54
-
57300.03
... More
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
8.13
-
6982.86
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
13.17
-
4978.26
... More
KSRB 4.6.10 Providing and removing centering , shuttering , strutting, propping etc, for chejjas, carbels etc., including edges including cost of all materials , labour complete as per specification
14.28
-
4933.03
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications.Specification no KBS 4.6.3
3.5425
-
322260.87
... More
KSRB 6-1.3 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructu/re including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.7
43.13
-
245362.26
... More
KSRB 9.4-4 : Providing WHITE Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33
0.06
-
3885.34
... More
KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
1
-
1438.5
... More
KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34
3.6
-
19357.38
... More
KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.
8.64
-
453.6
... More
KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.
8.64
-
879.98
... More
Providing & fixing of glazed 3 track -2panel sliding windown with mesh made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with GI throughtout the window, the sliding outer frame having a overall size of 108x45mm with reinforcement of 1mm thickness, sash with overall size of 39x58mm with reinforcement of 1.5mm thickness, mesh sash of overall size 30x48.5mm reinforcement with 1.5mm of GI, Glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. Fiber glass mesh shall be provided in mesh shutter, windows shall be provided with 5mm plain float glass, standard hardware and single point locking system of flush lock wall thickness of frame, mullion & sash shall be 2-2.2mm.
9.24
-
47704.73
... More
KSRB 7.9 : Providing and fixing M.S. grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combinatioon of M.S. flats and square as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification no KBS 7.12,
926.1
-
92378.48
... More
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
158.67
-
37152.58
... More
KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
220.06
-
58227.88
... More
KSRB 15.3.13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
108.76
-
27293.32
... More
Providing grooves in plastering on walls 25 to 40mm wide and to the required depth as per design and finished in cement mortar (1:4) including all labours, materials, centering, scaffolding, curing etc complete as directed by PMC/EIC.
211.16
-
4423.8
... More
Providing applying coats of wall putty to inside plastered walls and ceiling using cement putty.Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers,including cost of all materials,cost of labour and scaffolding etc.,complete as per specification.
267.44
-
23588.21
... More
KSRB 4-2.12 ; Extra for providing throating or drip moulding to RCC chajja with plastering (labour charges only ) as per specification. Specification No. KBS
15.2
-
526.68
... More
KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
487.5
-
48116.25
... More
KSRB 15-15.2 : Extra over item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications.
108.76
-
570.99
... More
KSRB 15-18.3 : Providing and applying enamel metal paint one coat (excluding priming coat ) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
44.1
-
4398.98
... More
Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli gray granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of curing - minimum width of 900mm.
105.15
-
218275.63
... More
KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
108.76
-
32432.23
... More
Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and ensured that it is in line and level. The textured material is then mixed with 40-50% of clean water until a homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react completely with ingredients. The textured finish prepared as above is then applied to the wall surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired finish. The finished surface shall be applied with two coats of exterior apex paint of approved shade. The rate includes providing and removing scaffolding, all lead and lift and all other incidental charges etc., complete as per directions of the Engineer-in-charge of the work.
44.01
-
20840.94
... More
KSRB 8.5 : Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.
3.6
-
7620.48
... More
KSRB15-4.1 Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortar 1:3, 12mm thick cost of materials complete as per specifications.
100.87
-
741.39
... More
Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The bottom & top member is provided with 50x50x6mm double equal angles, welded back to back and in between top & bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No.CBS/ SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments, etc., complete as per specification
350
-
48510
... More
PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.
59.72
-
43141.73
... More
Providing & fixing fixtures 0256 M.S handles oxidised 15cms - 15cms
2
-
110.16
... More
Providing & fixing fixtures 0188 Hinges 5" heavy duty
4
-
125.44
... More
Providing & fixing fixtures 0038 Bottom lock nail
1
-
39.83
... More
Providing & fixing fixtures 0178 Handles powder coated 150mm
2
-
101.7
... More
Providing & fixing fixtures 0427 Tower bolt 300mm long
2
-
203.38
... More
Providing & fixing fixtures 0540 Screws
16
-
54.24
... More
Providing & fixing fixtures 0220 Locking arrangements
1
-
550.85
... More
Water Supply Work: Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 20mm nominal OD pipes
35
-
8636.25
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 25mm nominal OD pipes
20
-
6153
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 50mm nominal OD pipes
20
-
9072
... More
KSRB13-6.1-2 : Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
6
-
1089.9
... More
KSRB13-6.2-1 : Providing and fixing in position brass stop cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
2
-
296.1
... More
Providing and fixing soap dish including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. With all lead and lifts as per the directions and instructions of the engineer in charge of work
2
-
30
... More
KSRB13-6.3-1 : Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 / 13.3
2
-
571.2
... More
KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22
1
-
7169.4
... More
KSRB13-9.5 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9
20
-
8925
... More
KSRB13-9.7 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9
15
-
9371.25
... More
Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM of acquirements and testing complete as per specifications. - 160mm dia
30
-
26869.5
... More
KSRB13-7.2-1 : Providing and fixing in position 25mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.10 / 13.13
2
-
997.5
... More
Supplying and fixing of 2/1.5 HP Monoblock pump of approved make with all accessories conforming to ISI specification including cost of all materials, labour, with all lead and lift etc., complete as per direction of the Engineer in charge of th work
1
-
11443.95
... More
Construction of UG Sump:- KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
5.94
-
1864.86
... More
KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5
6.53
-
3078.57
... More
KSRB 2.14-1: Extra for additional lift of 1.5m. or part thereof for excavation In loose / soft or hard soil including cost of materials, labour complete as per specifications.
3.56
-
74.76
... More
KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
0.5
-
2684.85
... More
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6
3.097
-
18795.69
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500
0.34
-
25099.6
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification. Specification No. KBS 4.6.2
4.14
-
1951.8
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
25.84
-
9767.52
... More
KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
20.18
-
4598.01
... More
KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
20.18
-
1907.01
... More
Plumbing Work: KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
13.5
-
4238.32
... More
KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11
3
-
15611.4
... More
KSRB 11-2 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11
3
-
13305.6
... More
KSRB 11-11.5 : Providing and fixing white vitreous china clay, flat back wash basin size 450x300mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11
2
-
5894.7
... More
KSRB 11-17.2 : Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications.
2
-
1415.4
... More
KSRB 11-15.3 : Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications.
2
-
2385.6
... More
KSRB13-6.1-1 : Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
2
-
399
... More
Providing and fixing CP health faucet with flexible hose CP 2 way Bib cock wall flange supporting hook with screws fixing materials and sealant to all side of wall flange etc., complete
2
-
4880
... More
Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 10cms x 7.5cms
2
-
525
... More
Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 12.5cms x 7.5cms
12
-
3591
... More
Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 450x450mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 450x450mm
2
-
11130
... More
Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 600x600mm
1
-
8934.45
... More
Soak Pit:- KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(a) / 2.3.5
20.27
-
6363.77
... More
KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5
2.25
-
1060.76
... More
KSRB 5-1.1 : Providing and constructing granite / trap / basalt rubble stone masonry in foundation with mud mortar (uncoursed), bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.12
9.49
-
23177.43
... More
KSRB 2.6 : Providing and filling sand in foundation upto plinth to required depth for sub soil treatment including watering ramming with all lead and lift complete as per specifications.specification. No. KBS 2.10.2
3.98
-
7409.37
... More
Providing and fillinf brick aggregate 25 mm (Nominal)
5.96
-
3712.36
... More
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6
0.98
-
5947.62
... More
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification. Specification No. KBS 4.6.2
7.55
-
3559.45
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500
0.06
-
4429.34
... More
Waste Water Outlet Pipe
3.2
-
1868.16
... More
Electrical Work: Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused waysof junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherevernecessary 19/20mm dia 2mm thick
400
-
16800
... More
Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused waysof junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherevernecessary 25mm dia 2mm thick
200
-
11130
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 75x75x65mm
6
-
548.1
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 100x75x65mm
7
-
646.8
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 180x90x65mm
4
-
399
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 200x90x65mm
6
-
699.3
... More
Supplying and fixing sheet metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 200x200x65mm
2
-
304.5
... More
Supplying and fixing PVC/metal conduit Deep junctionbox 19/20mm deep junction box
20
-
903
... More
Extra for Groove cutting in brick wall/CC floor to the suitabledepth for concealing of Conduit/GI pipe and plastering,finishing upto wall surface complete upto 50mm conduit in brick wall
30
-
661.5
... More
Supplying And Fixing Metal Fan Box with Round Hook.
14
-
1249.5
... More
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. Short point upto 3Mtr from tapping point to out let via switchbox
35
-
5880
... More
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box
22
-
5775
... More
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. Long point above 6Mtr upto 10Mtr from tapping point to outlet via switch box
14
-
5512.5
... More
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:confirming to latestamendments. 1.5 sqmm
350
-
7532
... More
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:confirming to latestamendments. 2.5 sqmm
900
-
30240
... More
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:confirming to latestamendments. 4 sqmm
100
-
4725
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 1 to 3 Module
6
-
693
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 4 Module
7
-
918.75
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 8 Module
4
-
840
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 10 Module
6
-
1449
... More
Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. 12 Module
2
-
567
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 6Amps one way Switch
35
-
2572.5
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 6Amps Two way Switch
2
-
199.5
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. Stepped Fan Regulator.
14
-
4263
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 16Amps one way switch
2
-
241.5
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 32Amps DP switch
1
-
191.1
... More
Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 6/16Amps universal socket
10
-
1701
... More
Supplying and fixing 32Amps security and energy savingDP switch with key tag suitable to operate on 230 Volts,50Hz AC supply & completely wired on existing box.
1
-
714
... More
Supplying fully automatic star-delta starter unit push buttontype with suitable wires, 3 contactors, one adjustablethermal timer mounted on a common base plate held in steelenclosure for use on 400/440 volts 3 phase and wired afterfixing to the existing wooden board for motor. Upto 12.5 HP
1
-
6720
... More
Supplying & fixing of Porcelain fuse channel with cut outon existing wooden/panel using necessary nuts, bolts andwashers. 32Amps
1
-
182.7
... More
Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898. 6-32Amps SP
1
-
455.7
... More
Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898. 6-32 Amps DP
1
-
954.45
... More
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. II - Double Door 8Way SP &N
1
-
1522.5
... More
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. II - Double Door 12Way SP &N
1
-
1890
... More
Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital readout ofpercentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flushmounting on panel board.
1
-
8085
... More
Supplying 250 amps rated 3phase with neutral bus barusing required capacity electrolytic aluminium strips coveredwith heat shrinkable coloured PVC sleeve, mounted onphenolic/FRP/DMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminium Strips
1
-
2992.5
... More
Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and -CT operated meterin polycarbonate body in class 0.5 accuracy as per IS 14697and completely wired.
1
-
3832.5
... More
Supplying, fixing, wiring, earth electrode for groundingconduits, I.C. cutouts and other equipment's on the meterboard using 40mm dia 2.90mm thick GI pipe 2.5 mtrlong buried in a pit … The pit should be filled with equalproportion of salt and charcoal 150mm all-round the pipe tocomplete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per ISIspecification 7.3.3. of IS 732 using 12mm dia bolts, nuts,washers and check nuts etc., the pipe shall have 16 throughholes of 12 mm dia
1
-
3149.68
... More
Supplying of 1.1 KV LT UG cable XLPE or Heat resistantPVC insulated, PVC extruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouringstrip thickness in average +5% and resistivity 14 Ohms/Kms(Max) as per IS-3975 3.5 core 25 sqmm
20
-
3780
... More
Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supplycomplete. 12" Sweep (300mm)
6
-
13230
... More
Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model
10
-
21945
... More
Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burninghours & 70% lumen maintenance with CRI > 80. PowerInput: 220-240V @ 50/60Hz & Power factor >0.9 along withCE approved. 2 years Warranty against any manufacturingdefect working under standard electrical condition LED light fighting 1 x4'- 20/22 w
12
-
4725
... More
Supply of round/square recess/surface mounted rollingtype LED Down light with .......W GU 10 LED Lamp RibFabricated from Die cast aluminium with white powdercoated prewired to mains connector & has swiveling unit ofaluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70%lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect workingunder standard electrical condition LED square or round down light 10-12W
10
-
8064
... More
Supplying and fixing of 5'-80 Watts of T8 Fluorescent Tubewith 54W power consumption with low 3mg Mercury contentless phosphor coating. Operating voltage range from 180Vto 265V, 50Hz AC power Supply
20
-
9870
... More
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin
10
-
1113
... More
Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders
42
-
4851
... More
Fixing a ceiling / wall mounting fan of all capacities and alltypes, with necessary clamps and 'S' hook made out of 15mmdia MS rod, with 5 amps. ceiling rose of approved qualitywith necessary length of 23 / 0.0076 inch PVC insulated twintwisted wire of approved quality, mounted on a suitable sizewooden board and wired.
14
-
3822
... More
Fixing all types and all capacities of 1'x4' / 2'x2' LED Lightfittings indoor on the wall / ceiling / rafters / girders withnecessary supporting frame, using 23/0.0076” twin twistedPVC insulated wires, required Nos of round blocks andclamps.
6
-
2835
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements