Rural Development And Panchayat Raj Department Tender

code04 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code05 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical sp ecifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code06 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code07 - Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code08 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code09 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code10 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code11 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code12 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code13 - Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code14 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code15 - Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code16 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code17 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code18 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code19 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with both side prelam with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code20 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code21 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code22 - Supplying and erection of R.C.C ring for well steining of 1.20 M depth using 1:1.5:3 proportion concrete using clean graded granite or trap basalt jelly of approved quality 20mm and down size well compacted including centering from work and plastering for both faces with C.M 1:3 proportion as per design using 6.5mm M.S. coil at rate if 10kg/ring including cost of steel and fabrication bailing out of water,erection etc..complete with all lead and lifts.(Excluding cost of cement and steel). For 1.20m dia (clear) rings of steining thickness 0.075mm upto 18 M depth with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code23 - Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 With Suitable size bends ,junction boxes adhesive paste etc and fixing using inverted wood plugsin case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code24 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code25 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Three outlet in a row, above 6m upto 10m from tapping point to out let via switches with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code26 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.10-12 Way with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code27 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.16A Universal Socke

code28 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work16A One Way Switch

code29 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code30 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5 mm2 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.

code31 - Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours AND 70per cent lumen maintenance with CRI greater than 80. Power Input: 220-240Vat 50by60Hz and Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 Wwith all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work.