Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position Reinforced cement concrete for all Foundation works The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators including all lead lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications The cost of steel reinforcement formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates sr 2023 24Vol 1 P No 15 I Nl 2 2 1 with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer incharge of the work.

code05 - Steel Fabrication Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost f all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification SR 2023 24 Vol 1 P No 18 I No 2 11 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code06 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3 5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 4 1 cement 4 coarse sand including cost of all materials labour scaffolding and usage charges of machinery other incidental charges complete as per the direction of engineer incharge of work PWD SR 2023 24 Vol 2 P No 13 I No 6 7 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code07 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 4 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge PWD SR 23 24 Vol 02 P No 42 I No 8 5 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code08 - Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge SR 23 24 Vol 02 P No 50 I No 8 51 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code09 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 1 cement 6 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge SR 2023 24 Vol 02 P No 42 I No 8 8 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code10 - Providing fixing of 3track 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame The outer frame having an overall size of 108mm width 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm 75mm with GI reinforcement of 2mm and mesh sash of size 37mm 58mm Coextruded Glazing bead for fixing of glass shall be of size 20mm 24 mm Windows shall be provided with 6mm plain float glass standard hardware Multi point locking system with touch lock Wall thickness of frame sash shall be of 2mm to2.5mm Maximum possible size 2419mm 2200mm The cost is inclusive of all fixtures and separate charges for minor T P s shall not be made SR 2023 24 Vol 02 P No 112 I no 12 90 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code11 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer with water absorption less than 0.08 and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 1 cement 4 coarse sand jointing with grey cement slurry 3 3 kg m2 including grouting the joints with white cement and matching pigments etc complete Size of Tile 600 600 mm PWD SR 23 24 P No 62 I No 9 12 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code12 - Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1 6 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab including cost of materials labour curing polishing complete as per specifications PWD SR 23 24 P N 64 I No 9 34 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code13 - Providing Mathi Nandi wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materials labour usage charges complete as per specifications SR 2023 24 Vol 02 P No 100 I No 12 12 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code14 - Providing and fixing in position fully panelled Matti Nandi wood shutters for doors with stiles and rails of 30mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials labour usage charges complete as per specifications excluding cost of fixtures SR 2023 24 Vol 02 P No 101 I No 12 21 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code15 - Providing and fixing M S grills of required pattern in frames of windows etc with M S flats square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows by welding SR 2023 24 Vol 02 P No 85 I No 11 34A with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code16 - Providing and fixing hand rail of approved size by welding etc to steel ladder railing balcony railing staircase railing and similar works including applying priming coat of approved steel primer M S tube including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineering Charge SR 2023 24 Vol 02 P No 82 I No 11 26 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code17 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge SR 2023 24 Vol 02 P No 45 I No 8 25 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work