Rural Development And Panchayat Raj Department Tender

PRED04 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipesbut without fittings and the base support for tank.(PWDSR 2023-24 P.NO 123 I No.13.34 VOL 2 )

PRED05 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes (PWDSR 2023-24 P.NO 122 I No.13 .33.4VOL 2 )

PRED06 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm ,nominal dia Pipes 20 mm ,nominal dia Pipes (PWDSR 2023-24 P.NO 122 I No.13 .33.2 VOL 2 )

PRED07 - Providing and fixing PTMT stop cock of approved quality and colour (PWDSR 2023-24 P.NO 75 I No.13.18 VOL 2 )

PRED08 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work(PWDSR 2023-24 P.NO.13 I No.6.3 VOL 2 )

PRED09 - Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWDSR 2023-24 P.NO.14 I No.6.13 VOL 2 )

PRED10 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarseaggregatesMix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates( PWDSR 2023-24 P.No.15 I No.2.1.2 Vol-1)

PRED11 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all otherappurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates( PWDSR 2023-24 P.No.16 I No.2.4.1Vol-1)

PRED12 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWDSR 2023-24 P.NO..41I No.8.3.2. VOL 2 )

PRED13 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWDSR 2023-24 P.NO.45 I No.8.25. VOL 2 )

PRED14 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..(PWDSR 2023-24 P.NO.48 I No.8.40 VOL 2 )

PRED15 - Providing and fixing ture horizontal levele suspended ceiling comprising of GI Clip -In with double pipe self leveling feature and special tabs to allow remival if tle to enable plenum access with plain visual consisiting of 600x600mm clip white colour .The tile shall be powder coated with dust repellant, anti microbial coating having light reflectance grater than 85 % 4892-2 & ISO 16474-3 respectively .The coating also resistance to fluorescence and UV-A as per ISO 4892-2 & ISO 16474 -3 respectively.The Coating also resists the mold growth as per ASTM D 3273 .The tiles would have Fire Performance of Class A1 as per BSEN 13823 :2010 +A1 :2014 standard in module size of 600x600mm (PWDSR 2018-19 P.NO.330 I No.39.12.16)

PRED16 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWDSR 2023-24 P.NO.49 I No.8.49 VOL 2)

PRED17 - Supplying and fixing PVC/metal conduit Deep junction box25mm junction box (ELEPWD SR 2023-24 P.No,3 I.NO1.5.2)

PRED18 - Point wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC Insulated multistrand 2x1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed on the plastic sheet gangbox,the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round bolck complete for each out let a)Short up to 3 Mtrs from tapping point out let via switch b) Medium Point above 3 mtr upto from tapping point out let via switch c) Long point above 6 Mtr upto 10 Mtr from tapping point out let via switch (PWD SR 2023-24P.No,5I.NO. 2.1.1.2)

PRED19 - Supplying 6A flush type socket and 6 A flush type SP switch eithersurface/flush mounting in existing gang box or in 4mm thick plasticsheet and fixing over a flush mounted wooden box and wiring usingnecessary capacity wires as required as per IS 1293 and IS 3854 (PWD SR 2023-24 P.No,8 .NO.3.1)

PRED20 - Supplying and fixing of backlite DP switch with neon indicator over existing woodboard of flush mounting in a plastic plates ( PWD SR 2023-24 P.No,10 I.NO.3.14.12)

PRED21 - Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS694:20104.00Sqmm. 1.50 Sqm

PRED22 - Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS694:20104.00Sqmm. 2.50 Sqm

PRED23 - Supplying and fixing of Electronic Ballast suitable for T5 Lampwith housing made of Pre-coated steel/PC, Operating voltage rangefrom 180V to 265V, 50Hz AC power Supply flicker free warm startwith over voltage protection, Inrush current protection, Deactivated lamp protection& End of Lamp life protection withPF 0.95 & TC(degC) 65 deg C compliance to EN 61347-2-3(Safety), EN60929(Performance), EN55015(EMI/RFI), EN61000-3-2(Harmonics), EN 61547 (Surge). Operating voltage range from180V to 265V, 50Hz AC power Supply.' (PWD SR 2023-24 P.No,51 I.NO.12.19.4 )

PRED24 - Supplying and fixing of modular switch & Connected accessories on existing modular switch plate as per IS 3854 and IS 1293 ( PWD SR 2023-24P.No,9 I.NO.3.6.2 )