Rural Development And Panchayat Raj Department Tender

code04 - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401For For Grading -VI Material Complete as per direction of Engineer in charge.

code05 - Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets 500mm Dia Complete as per direction of Engineer in charge.

code06 - Water Bound Macadam Grading-I Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Mechanical means Using Screening Crushable type such as Moorum or Grave Complete as per direction of Engineer in charge.

code07 - Water Bound Macadam Grading-II Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.Using Screening Crushable type such as Moorum or Gravel

code08 - Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mechanical means. Complete as per direction of Engineer in charge.

code09 - Tack coat on Granular surface treated with primer Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous surface cleaned with mechanical broom Complete as per direction of Engineer in charge.

code10 - Close Graded Premix Surfacing/Mixed Seal Surfacing Providing, laying and rolling of close-graded premix surfacingmaterial of 20 mm thickness composed of 11.2 mm to 0.09 mm(Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG-30 bitumen to required line, grade and level to serve as wearingcourse on a previously prepared base, including mixing in asuitable hot mix plant of capacity not less than 40/60 TPH, layingand rolling with a Smooth wheeled roller finishing to requiredlevel and grade. Complete as per direction of Engineer in charge.

code11 - Providing and fixing board displaying information, suchas 'Name of work, Tender cost, Name of Contractor, Workcompletion and liability period etc', having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mildsteel sheet painted with one coat of Zinc chromate stovingprimer and two coats of enamel paint on front side and greystove enamel on back side and border / messages / symbolsetc. with approved colour shade paint complete, on M.S.angleof size 35 x 35 x 3 mm frame with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpainted with alternate black and white bands of 25 cm widthincluding all fixtures etc.and fixing the boards in 1:4:8 concreteblock of size 60 cm x 60 cm x 75 cm including, excavation,refilling, transportation, and labour etc complete. Spec. No. Asdirected by Engineer in Charge & MoRTH specification 804 Complete as per direction of Engineer in charge.