Rural Development And Panchayat Raj Department Tender

7.1.1 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m²

6.32 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.

8.3.2 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

2.1.4 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates

Gem Portol - OFFICER TABLE: of Size 72 L x 36 W x 30 H with three drawers on the right side with locking device and a cupboard with a shelf on the left side withround legs of section of 25 dia 16G. The Top shall be of 20 mm thick laminated black board with wooden double bordered gray shade. All Components should be made of MS Sheet of 20G Office table for steel.

Gem Portol - Rack Unbranded 915 mm wide 1875 mm high Metal Shelving Racks Rack

Gem Portol - Office Staff Chair: Providing Office Staff Chair Office Staff Chair

Gem Portol - Reading Room Chair: with good branded quality of fiber chairs. As per ISO 9001:2008 Heavy Duty with arms fiber chair

Gem Portol - Executive Chair: Providing EXECUTIVE CHAIR Revolving Chair with Syn chronic tilt mechanism

Gem Portol - 5 Seater Desk: SIZE:1830 mm L x 920 mm W x 810 mm H Height at the center of the writing plank including 25 mm Bush SPECIFICATION Made by 25 mm 25 mm and 25 mm x 50 mm 16G CRCA tubular section frame and 18 swg CRCA sheet book shelves fitted with IS 303:1989 standard BWR Grade ply with both side hot pressed 1 mm thick lamination sheet with all round 2 mm thick PVC edge bend beading for sitting writing and back rest planks water resistant termite resistant. The desk frame has to be grey colour powder coated.Planks 1,2 & 3 Color 5 Seater Desk.

Gem Portol - GLASS DOOR STEEL ALMIRAH 6 1/2 FOR LIBRARY:Size 78 H x 36 W x 19 D including leg of 6 fitted with four fixed shelves making five compartments double door with Two Way Locking device and duplicate keys all joints outside and inside should be spot or arc welded and neatly finished by grinding. The almairah made by 18/20 guage CR Sheet. The outside corners should be properly bent of the door lengthwise should be double folder and neatly finished.The shelves front side should be bent to U Shape neatly and finished to avoid any possible cuts to fingers and hand when handled. Longitudinal rib of 15.24 cm wide including bent to required shape be provided and fixed to each door at its centre.The doors should be fixed with 3 mm glass. The glass should be good quality.The breadth of the shelf in the Almirah should be to the entire width leaving about 12 mm gap from the shutter when it is closed. LOCKING DEVICE: Three way locking device with 10 guage MS Sheet for locking and leave plate and with locking rod of 10 mm dia with strong bracket at top and bottom to hold the locking rod with six level lock should lick to be fixed. Handle should be made out of brass cast alloy with nickel chrome lated. Lock should be Good quality.