Rural Development And Panchayat Raj Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 12,500Document Cost
Refer DocumentsTender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RDPR/2024-25/BD/WORK_INDENT11116/CALL-2Tender No
RDPR/2024-25/BD/WORK_INDENT11116/CALL-2Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
004 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (P.No. 9 I.No. 5.4 Building SR 2023-24 Volume -2 )
4.25
6389
27153.25
... More
005 - Appendix I Additionalities for Formwork, Centering - 3 Foundation, Sub structure of Cross drainages . - 5% ( PWD Common SR 2023-24, SL No. 3, Page No : 111, Volume-1)
2.28
310
708.738
... More
006 - Appendix I Additionalities for Formwork, Centering - 2. Plinth Beams of Building - 50 % ( PWD Common SR 2023-24, SL No. 2, Page No : 111, Volume-1)
3.32
3108
10320.22
... More
007 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 ( M10) Using 20 mm ominal size graded crushed coarse aggregates ( PWD Common SR 2023-24 Item No: 2.1.4, Page No : 15, Volume-1
5.6
6217
34815.2
... More
008 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (P.No. 7 I.No. 1.9 Common SR 2021-22 Volume -1 )
20.84
266
5543.44
... More
009 - Appendix I Additionalities for Formwork, Centering - 9. RCC Columns / Shaft (Slip Centering . - 70% ( PWD Common SR 2023-24, SL No. 9, Page No : 111, Volume-1)
2.98
4641
13830.18
... More
010 - Appendix I Additionalities for Formwork, Centering - 15. RCC Roof Slabs - 50 % ( PWD Common SR 2023-24, SL No. 15, Page No : 112, Volume-1)
7.81
3315
25890.15
... More
011 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No. 16 I.No. 2.5.1 Comman SR 2023-24 Volume -1 )
10.79
6630
71537.7
... More
012 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. ( PWD Common SR 2023-24 Item No: 2.11, Page No : 90, Volume-1)
1.31
89457
117188.67
... More
013 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ( PWD Common SR 2023-24 Item No: 6.7, Page No : 13 )
18.07
8211
148372.77
... More
014 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. (SR 2023-24 Vol-2, P.No. 77, I.No. 11.5.1)
11.16
4478
49974.48
... More
015 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (P.No. 86 I.No.11.34A Building SR 202122 Volume -2 )
181.44
168
30481.92
... More
016 - Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (P.No. 42 I.No.8.7 Building SR 2023-24 Volume -2 )
261.68
366
95774.88
... More
017 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm (P.No. 61 I.No.9.17.2 Building SR 2023-24 Volume -2 )
46.13
1175
54202.75
... More
018 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( Vol-2 , PWD Common SR 2023-24 , Item No-8.25, Page No-45 )
261.68
137
35850.16
... More
019 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.No. 48 I.No. 8.41, RWS SR 2023-24 Volume -2)
42.11
167
7032.37
... More
020 - Supplying heavy gauge PVC Conduit Pipe 25 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (Elec SR- Item No. - 1.3.2 Page No. - 55)
70
54
3780
... More
021 - supplying and wiring adopting loop system in existing PVC conduit / casing capping uding 110V grade , COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.55SQ.MM Cable confirming to the GTP, with a 6AMPS flush type SP control switch shall be fixwd on the existing plastic sheet /gang box,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block . complete for each outlet.(Elec SR Item No. - 2.2. Page No. - 59) Short point up to 3Mtr from tapping point to outlet via switch box.
2
160
320
... More
021 - supplying and wiring adopting loop system in existing PVC conduit / casing capping uding 110V grade , COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.55SQ.MM Cable confirming to the GTP, with a 6AMPS flush type SP control switch shall be fixwd on the existing plastic sheet /gang box,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block . complete for each outlet.(Elec SR Item No. - 2.2. Page No. - 59) medium point above 3Mtr upto 6Mtr from tapping point to outlet via switchwith box.
2
250
500
... More
022 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.(Elec SR - Item No - 2.3 Page No. - 59 &60 ) 1.5 Sqmm
30
20
615
... More
022 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.(Elec SR - Item No - 2.3 Page No. - 59 &60 ) 2.5 Sqmm
20
32
640
... More
022 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.(Elec SR - Item No - 2.3 Page No. - 59 &60 ) 4 Sqmm
25
45
1125
... More
023 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Elec SR - Item No. - 3.4 Page No. - 65 ) 1-3 way
1
95
95
... More
023 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Elec SR - Item No. - 3.4 Page No. - 65 )
1
125
125
... More
024 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Elec SR - Item No. - 3.5.1 Page No. - 65) 1 to 3 Module
1
110
110
... More
024 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Elec SR - Item No. - 3.5.1 Page No. - 65) 6 Module
1
175
175
... More
025 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A (Elec SR Item No.-3.6, PageNo-66 ) 6 Amps 3way Socket.
2
105
210
... More
025 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A (Elec SR Item No.-3.6, PageNo-66 ) Stepped Fan Regulator
3
290
870
... More
025 - Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A (Elec SR Item No.-3.6, PageNo-66 ) 32 Amps DP Switch
2
182
364
... More
026 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.(Elec SR Item No- 5.17 Page No. - 86 ) 6-32 Amps DP
1
909
909
... More
027 - LED Indoor Supplying of 4 feet LED PVC Square Batten .W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80 Power Input: 220 240V 50 60Hz Power factor 0.9 along with CE approved drivers 5 years Warranty against any manufacturing defect working under standard electrical condition (Elec SR Item No 12.3 Page No.133 )LED light fighting 4 28 watts
2
375
750
... More
028 - Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. (Elec SR - Item No. - 6.6.1 Page No. - 102 )
6
110
660
... More
029 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) (Elec SR - Item No. - 6.6.1 Page No. - 102 )
2
2090
4180
... More
030 - Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ( Elec SR - Item No. - 14.8 Page No.- 152 )
3
150
450
... More
031 - Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strips (except 2CX10Sq.mm wire armoured) as per IS-3975:1990 & extruded PVC outer sheathed armoured cable as per IS-1554 Part-1:1988 & confirming to GTP of GROUP-B ( Elec SR Item No. - 6.4, Page No.- 101)
10
95
950
... More
032 - Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. 6 sqmm to 16 sqmm (Elec SR - Item No. - 6.5.1 Page No. - 102 )
10
11
118.8
... More
033 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. In Ordinary Soil. (Elec SR- Item No. - 6.6.1 Page No. - 102 )
5
76
380
... More
034 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122 mm dia (Elec SR- Item No. - 6.1 Page No. - 101 )
1
2999
2999.7
... More
035 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter.
1
1150
1150
... More
036 - Meter Charges
1
5000
5000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%