Rural Development And Panchayat Raj Department Tender

code04 - VERTICAL SINGLE BOX BALER Specifications Details, Machine Type Vertical single box baler, Baler classification Manual operation Baler will have to process all types of dry waste including but not limited to PET, rigid plastics, flexible plastics, paper, Old Corrugated Carton (OCC), textile waste, foot wear, etc., Material to be handled Motor & Pump 5 HP, Main drive motor capacity Motor manufacturer/brand ABB/Crompton/Siemens, Hydraulic pump type Vane pump, Hydraulic pump manufacturer/make Yuken/ Dowdy/ Polyhedron make, Hydraulic operating pressure 3,000 PSI, Hydraulic valve type Manually operated Directional Control Valve, Electrical control panel make Siemens make or equivalent, Electric control panel features, Push buttons switch and light indicators Provide 10m armored cables for connection between machine and Electric cables power source, Structure Number of bailing chamber One, Chamber size 508 mm (L) x 711 mm (W) x 1220 mm (H), Maximum bale size 508 mm (L) x 711 mm (W) x 610 mm (H)., 10 mm - 6 mm T hick (Pressing plate and bottom plate should be minimum 40 mm size). All metal sections to be of appropriate thickness and specification to ensure structural stability under normal operations. Design to take into considerations fatigue loading parameters to avoid any cracks or failures, Structural plate thickness Specification of metal used for fabrication of baler Mild Steel Ideally of a combination of 75 mm. Design should ensure structural, Channels stability and safe operations of baler,. Locking system Multipoint lock for safe operations Guides Metal guide rods or guide bushes on pressing plate to be provided, Machine weight (Approximate) 1,300 Kg minimum. Machine footprint (overall machine dimensions) 1220 mm(L) x 610 mm (W) x 3657 mm (H) Dry waste color paper/Old Corrugated Carton/Flexible plastic, Bale weight films/PET bale - minimum 60 Kg, Paint Primer with minimum 2 coats of epoxy paint, Pressing and release operations of pressing plate Manual operation Feeding hopper volume Minimum 100L, Hydraulic oil tank placement On shop floor besides the baler, Bale ejection Hydraulic actuation of safe bale release, Bale tie system Manual operations, Number of bale ties Minimum 3 bale ties, Specification/type of bale wires to be used 3.25 MM Annealed wire(Made by prime wire rods), Limit switch Limit switches to be provided for end of stroke identification Drainage of fluids from bale chamber Baler design to accommodate systematic liquid drainage channels Provide anchor bolts and the baler footing to have holes for Anchoring of baler installation of the anchor bolts, Hydraulic cylinder Number of main pressing/load cylinder One, Number of cylinder for ejections One, Main pressing cylinder tonnage/ram pressing force 25 Tons, Main pressing cylinder bore diameter Main pressing piston rod dimension 125 mm, 120 mm Hydraulic oil tank capacity 100 Liters Piston Rod finish Hard chrome finished, Piston scales & rod seal Bronx Filled, PU seals & Chevron pack Cylinder bore finish, Honing Finished Main cylinder Stroke length Minimum 1300 mm, Speed of forward stroke 25-30s Speed of backward stroke 18-23s Production Rate (Per hour ) 1 - 2 bales per hour, Cooling Oil cooler is required to maintain moderate oil temperature, Grade of hydraulic oil 68 grade hydraulic oil, Manufacturer/make of hydraulic oil Eni make or equivalent Detail on electrical supply and concrete foundation Supplier to provide prior information (upon securing tender) on details of electrical connections, earthing work requirement, civil works requirements for foundation, civil works requirement for collection of drained fluids.