Rural Development And Panchayat Raj Department Tender

code04 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code05 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m². with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code06 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code07 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt,dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code08 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code09 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code10 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS4270- 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code11 - Providing, supplying to work site, fixing of Submersible Pump Set of 150mm dia suitable for borewell and confirming to IS 8034 3Phase, SS Bowl & Impeller with Low volt Motor and as perspecifications, with testing, as per instructions of engineer in-charge of work and latest amendmnents 3.00HP -20Stage. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code12 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch box.Short point Up to 3Mt from tapping point to out let via switch box. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code13 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5sqmm . with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code14 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5sqmm .with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code15 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 4sqmm .2.5 sqmm. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code16 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.4-5 Way . complete as per direction of engineer in charge. 4-5 way. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code17 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.6-8Way . complete as per direction of engineer in charge 8 way. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code18 - Supplying and fixing of modular Stepped Fan Regulator. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code19 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" sweep 5 star(1200mm). with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code20 - Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired .with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code21 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.

code22 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 63mm dia., 6 kg/sqcm & class 3 . with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc, complete. as per the directions of the Engineer-in-charge of the work.