Rural Development And Panchayat Raj Department Tender

Code04 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a) Buildings (P.NO.18.I.NO.2.11 PWD SR 2023-24 Volume-1)

Code05 - Kerb StonesSupplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size (P.No.74/ I. No. 8.42.3 Volume-3 PWDSR-2023-24)

Code06 - Painting on concrete surface Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2 (P.No.123/ I. No. 13.14 Volume-3 PWDSR-2023-24)

Code07 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,grading to required slope and compacting to meet the requirementcomplete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work. (Volume-1 P.No.8, I.No:1.8 P.W.D SR 2023-24)

Code08 - Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches. Tar Road (P 64/ I.No.29.10 PWD BESCOM Part-IV 2023-24)

Code09 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm (P 9/ SI No.52 I.No.21.05 PWD BESCOM Part-IV 2023-24)

Code10 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (P 9/ SI No.214 I.No.32.05 PWD BESCOM Part-III 2023-24)

Code11 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) (P 9/ SI No.217 I.No.32.07 PWD BESCOM Part-III 2023-24)

Code12 - 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 10 Sqmm Weight per 100 Mtr Coil: 5.3 Kg (P 21/ SI No.374 I.No.48.04 PWD BESCOM Part-III 2023-24)

Code13 - Optical Fibre Cable (OFC) and its Accessories HDPE/PLB Pipe 50/42 mm (P 30/ SI No.536I.No.66.05 PWD BESCOM Part-III 2023-24)

Code14 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance ofcomplete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned LED Streetlight 120 W (P 46/ I.No.11.8.5 PWD Electrical Item Part-I 2023-24)

Code15 - Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG (P 20/ I.No.5.42.1 PWD Electrical Item Part-I 2023-24)

Code16 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS694:2010 3C x 2.5 mm2 (P 6/ I.No.2.5.8 PWD Electrical Item Part-I 2023-24)

Code17 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. (P 9/ I.No.3.9 PWD Electrical Item Part-I 2023-24)

Code18 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting overexisting pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. (P 56/ I.No.13.5 PWD Electrical Item Part-I 2023-24)

Code19 - Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts and washers. 32A (P 14/ I.No.5.7.2 PWD Electrical Item Part-I 2023-24)

Code20 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. (P 21/ I.No.5.47 PWD Electrical Item Part-I 2023-24)

Code21 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 32A (P 16/ I.No.5.18.1 PWD Electrical Item Part-I 2023-24)

Code22 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP (P 17/ I.No.5.18.1 PWD Electrical Item Part-I 2023-24)

Code23 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm (P 20/ I.No.5.41.3 PWD Electrical Item Part-I 2023-24)

Code24 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia (P 54/ I.No.12.56 PWD Electrical SR 2023-24)

Code25 - Decorative Median Light poles:Fabricating,supplying and erection of erction 12mtrs long hot dip galvanised conical pole with BSEN 10025 grade 355JO steel plate for shaft,IS 2062 for base plate with door openings arrangements, including suitable boards, Bakelite sheet and MCB's as per IS speciations suitable to withstand the wind speed of 47m/sec for mtrs pole in double/single section and single joint welded as per IS9595/IS 10178A WS having2nos of 11to12 stone bottom 190mm, top 60mm,with 3mm thick. The pole should be painted asthetically using good quality Dopont paint .The Center pole having dimensions of 165mm OD 3mtr length 2.4 mm thick with performation for the length of 1000mm inserted with colour changing LED tube inside.Should be painted with good quality Dupont paint and stainless steel ball should be placed on the top.Suitable base plate and 6 Nos of 24 m long Jbolts along with template and the pole shall be hot galvanised in single dipping with not less than 65 micorn as per ASTMA 123 and 153 etc.. The pole height may be varied at bridge section etc.Rates Vide letter SE,PWD,Shivamogga Cricle, Shivamogga NO.SE/SC/AE-1/Koda.da/2022-23/162 Approved Rates Vide letter SE,PWD,Shivamogga Cricle, ShivamoggaNo.SE/SC/JE-1/2021-22/162 Dt:03-09-2021 ----Including cost and conveyance of all mterials,labour,hire charges of machinaries and equipments with all lead and lifts,loading and unloading charges etc., complete as directed as per the specification and direction of Engineere in -charge of the work