Rural Development And Panchayat Raj Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 26,100Document Cost
Refer DocumentsTender Fee
₹ 560
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RDPR/2024-25/WT/WORK_INDENT7799Bid Award Id
ViewTender No
RDPR/2024-25/WT/WORK_INDENT7799Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.11.a - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification.
1.001
93929
94023.77985
6.8 - Providing Brick work with common burnt clay Non Modular bricks of
class designation 3.5 in superstructure above plinth level in all shapes and
sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of
all materials, labour, scaffolding and usage charges of machinery & other
incidental charges complete as per the direction of engineer incharge of
work.
2.42
8367
20249.229
1.9 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to 50 m
and lift upto 1.5 m.
12
279
3351.6
8.6.1 - Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement to brick masonry
including rounding off corners wherever required smooth rendering,
providing and removing scaffolding, including cost of materials, labour,
curing complete as per specifications and as per directions of Engineerin-charge.
24
339
8139.6
8.28 - Finishing walls with water proofing cement paint of required shade :New
work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge.
14
93
1308.3
9.36 - Providing flooring with 25mm thick polished Cuddapah slabs using cement
mortar 1:6, 25mm thick over existing cement concrete bed or top of roof
laid to line and level and jointed with cement slurry mixed with pigment
to match the shade of the slab , including cost of materials, labour, curing,
polishing complete as per specifications.
15.44
1732
26749.8
10.1.3 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc PVC pipes 50mm dia., 6 kg/sqcm & class 5
65
106
6893.25
10.1.1 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete PVC pipes 25mm dia, 10 kg/sqcm & class 5
30
50
1512
20.9.8 - Providing, Providing & Installation of Storage System (Ground Level
Storage Reservoir) using GLASS FUSED STEEL TANKS made of as
per in compliance with AWWA D 103. GFS Tanks ( with sealant) for
intermediate balancing tank (filter feed tank) and confirming to the
following specifications as per ANNEXURE : D
Tank of capacity 1000KL
1000
13
13650
21.1.9 - Water purification plants: Providing, Installation and Commissioning of
automatic Water purification plant (RO+UF) with all accessories piping,
product water tank on single phase power supply as per the enclosed
detailed Technical Specifications including cost of material, loading
and unloading and as directed by the Engineer in charge. (Ref- detailed
specification enclosed seperatly). Note:- 1.The above rates mentioned
are only for the preparation of estimate purpose. 2. All items are to be of
BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for
procurement. 4. No direct payment should be made under any situation
or condition or on any account. 5. After commissioning of plant necessary
testing to be done for the satisfactory of Engineer Incharge. Note : Refer
the ANNEXURE : F for Detailed Specification of Each components For 1000 LPH
1
463050
463050
13.6.1 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)
suitable for bore well confirming to IS 8034-2000 specifications, to work
site with testing of as per instructions of engineer incharge of work and
latest amendments etc complete
1
13983
13983.9
7.33.1 - Providing and Fixing UV Stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated J or L hooks bolts and nuts 8 mm dia G.I Plain bitumen washers complete but excluding the cost of purlins rafters trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent clear or pigmented textured or smooth as specified 2 mm thick corrugated
49.8
1110
55322.82
11.11.1 - Providing and fixing factory made ISI marked steel glazed doors, windows
and ventilators, side /top /centre hung, with beading and all members
such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel
sections, joints mitred and flash butt welded and sash bars tenoned
and riveted, including providing and fixing of hinges, pivots, including
priming coat of approved steel primer, but excluding the cost of other
fittings, complete all as per approved design, (sectional weight of only
steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete
block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) including cost of materials, labour, usage
charges of machinery complete as per specifications and as per directions
of the Engineer-in-Charge
138.6
155
21538.44
8.41 - Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two coats on new
work over an under coat of suitable shade with ordinary paint of approved
brand and manufacture after thoroughly brooming the surface to remove
all dirt, dust, mortar drops and foreign matter including preparing the
surface even and sand paper smooth, cost of materials, labour complete
as per specifications and as per directions of Engineer-in-charge.
7.92
175
1388.772
8.49 - Lettering with black Japan paint of approved brand and manufacture to give
an even shade including preparing the surface after thoroughly cleaning the
surface to remove all dirt, dust and foreign matter, cost of materials, labour
complete as per specifications and as per directions of Engineer-in-charge
750
4
3150
1.2.1 - Supplying heavy gauge PVC conduit pipe . mm dia.mm thick
confirming to IS 2509 with suitable size bends, metal/PVC Junction
boxes, adhesive paste etc., and running before concreting the slab. The
conduit should be tied to the reinforcement rods by using binding
wires and unused ways of junction boxes and pipe ends should be
covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 19/20 mm dia 2 mm thick
20
69
1386
1.4.4 - Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.180 x 90 x 65 mm
1
169
169.05
2.5.4 - Supplying and drawing Flexible Multicore Cable manufactured with
electrolytic grade flexible copper with low conductor confirming to
IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for
working voltage upto 1100 Volts as per IS-694:19906C x 1.5 mm2
55
127
6987.75
2.1.2 - Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &
1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to IS-694: and latest amendments) with
a 6Amps flush type SP control switch shall be fixed on the existing
plastic sheet/ gang box, the other end of the wires shall be terminated
with sufficient loose length in a wood/PVC round block. complete for
each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via
switch
2
413
827.4
3.2 - Supplying and mounting 2 Nos. of 2Way 6 A flush type switches
either surface/flush mounted on existing gang box or in 4mm thick
plastic sheet and mounted on a flush mounted wooden box and wiring
as per IS 3854
6
178
1071
3.14.16 - Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.Electronic stepped regulator
1
295
295.05
3.5.8 - Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box.18 Module
1
479
479.85
11.2.2 - Supplying & fixing retrofit type-PL- LED Lamp . W LED
linear source with CCT 6500 degree K, CRI 70%. efficacy 80
lumen per W, life 25000 burning hours and Compliance to IS
10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF
electronic driver integrated in the system, with PF 0.95, power loss
should 5% of lamp Wage., short circuit & open circuit protection to
be integrated in the circuit, THD less than 20%, Life as per LM 79.
The operating input voltage should be between 130 to275 V. Tested
by NABL/CPRI accredited laboratory with 2 years Warranty against
any manufacturing defect working under standard electrical condition.18-20
4
737
2948.4
1.5.1 - Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box
5
51
257.25
11.2 - Providing and fixing Structural Steel work riveted, bolted or welded in
built up sections, trusses and framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer all
complete including cost of materials, labour, usage charges of machinery
complete as per specifications and as per directions of the Engineer-inCharge.
1229.76
118
145911.024
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements