RITES Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
RITES Limited - RITES Tender
Education And Training Services
Eprocure
Opening Date15 Nov 2024
Closing Date27 Nov 2024
Tender Amount₹ 2,20,08,000
Costs
EMD
₹ 4,40,000Document Cost
₹ 8,260Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RITES_214743_1Tender No
RITES/SRPO/PU/BLR/LT/06/2024Tender Authority
RITES Limited ViewPurchaser Address
-Website
http://https://www.rites.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in position plain cement concrete for levelling course for all works in foundation. Thegranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including formwork)
-
-
-
Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates
43.62
6417
279923.06
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including formwork)
-
-
-
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
-
-
-
Consider for Formwork 5% (Foundation, Sub structure of Cross drainages)
108.7
7318
795475.3
Consider for Formwork 35% (Cement Concrete Drain Walls)
89.69
9408
843889.62
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and
technical specification.
11.9
98402
1170992.13
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS
2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
43.2
1441
62251.2
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Page no 83 item 11.28 P.W.D. SR-2021-22 vollume -II)
225
621
139837.5
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size)
by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge.
232.08
880
204230.4
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
605.6
408
247145.36
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree
angle with 10 years life)
594.4
173
103306.72
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/
m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drain-age of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete.
289.71
1287
372856.77
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required
pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
5394.15
880
4746852
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409
-
-
-
PCC M20 grade for kerb Cast in Situ
400
408
163240
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey.
-
-
-
RCC NP3 Class pipe of 300 mm dia.
10
1465
14652
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge
4772.5
149
713966
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5
3
6206
18618.6
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and
45 cm deep for pipe line with one or two inlets :With common burnt clay (non modular) bricks of class designation 3.5
2
6905
13811.6
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame
to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5
-
-
-
Extra for depth for manholes : Size 90x80 cm With common burnt clay (non modular) bricks of class designation
2
10159
20319.2
Supplying and fixing new Mangalore tiles on existing reepers
50
523
26180
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection
above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test.
1
5816
5816.8
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )
-
-
-
Borewell depth of 0 to 50 m
50
339
16995
Borewell depth of 50 to 100 m
50
425
21285
Borewell depth of 100 to 150 m
50
453
22660
Borewell depth of 150 to 200 m
50
525
26290
Yield testing of borewells at final depth with a minimum of 10 hours continuously with the help of pump testing unit including the cost of transportation charges, crew charges and cost of consumables.
1
17936
17936.6
Schedule 1 b - Part - B- Market Rate Items (Civil)
-
-
-
Providing and fixing of 3 seater Granite Stone benchs of size of 1600mm X 600mm X 1000mm he rate includes cost of all materials,labour,hire of tools & machineries and as per specifications. And the item of supply and installation for work should be carried out as per the specifications & directions of Engineer -in-charge
10
13200
132000
Providing and fixing NAME BOARDS for office approved brand Stainless steel board of size 450mm x 15 mm x 2 mm including with all lead & Lift, including cost and conveyance of all materials , labour, hire charges of machineries and equipments and all other incidental charges etc as per specifications.
100000
3
303000
Schedule - 1 A - Part - a - KPWD SR 2023-24 Items - Electrical
-
-
-
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.
-
-
-
7 m - Top 70 mm and Bottom 130 mm dia
40
13500
540000
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.
-
-
-
Single Arm Bracket with 1000 mm Standard 40/50 mm dia
40
1700
68000
Double Arm Bracket with 1000 mm Standard 40/50 mm dia
10
2700
27000
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering
superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.
-
-
-
LED Street Light 70 W
40
5992
239680
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
40
162
6480
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.
-
-
-
3C X 2.5 mm2
400
113
45200
EARTHING- Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
10
4256
42560
GI/Copper strips for grounding connections, using necessary fixing materials as required.
-
-
-
25 x 3 mm GI strip
220
82
18040
Schedule - 1 B - Part b - ESCOM SR 2023-24 Items - Electrical
-
-
-
LT Cable:- 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
-
-
-
16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
-
-
-
Supply
2.8
156026
436873.36
50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm)
-
-
-
Supply
0.1
196870
19687.03
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
-
-
-
2.5 to 25 Sqmm
2.8
22974
64328.88
35 to 95 Sqmm
0.1
34252
3425.29
Aluminium End Terminal (Lug)
-
-
-
16 Sqmm
330
2
726
EXTRA ITEMS
-
-
-
Market Rate Items - Electrical
-
-
-
Stree Light feeder pillar box : Supply, erection, testing and commisioning of outdoor type Street Light Control box fabricated our of 14 SWG CRCA sheet steel metal with powder coated (siemons grey). The scope of the work includes fixing of FPB at 0.75m above ground level with necessary platform. The feeder pillar box shall comprise of the following. Incomer : i) 63 A 4P MCCB - 1No. ii. 100 A Al Bus bar (RYBN) iii 45 A 3 pole AC conductor of L & T iv. RYB phase indication lamps - 1set v. Voltmeter with selector switch -1no viAuto / manual selector switch vii. Clocked timer switch with ON / OFF cycle on 24 hour basis operated by 230V circuit with not less than 72 hour reserve for independent operation, NO / NC contactor similar to L & T or MDS legrand make type Maxi Rex QT.-2 nos Outgoing :
i. 32A 4Pole MCBs for circuits - 8 nos. ii. Terminal connector boxes of 40A rating - 6nos. for cable termination, complete with internal wiring.
2
51917
103834.62
Schedule - 1 A - Part - a - KPWD SR 2023-24 Items - Electrical
-
-
-
DIESEL GENERATOR SET
-
-
-
Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications. Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of
operation
-
-
-
200 KVA / 160 kw
1
1598191
1598191
Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O/L relay,..... A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth
fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD
specifications, PCB norms and KSGEI Acts and Rules.
-
-
-
200 KVA
1
230228
230228
EARTHING: - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
6
4256
25536
GI/Copper strips for grounding connections, using necessary fixing materials as required.
-
-
-
25 x 3 mm GI strip
120
82
9840
25 x 6 mm GI strip
60
128
7680
25 x 6 mm Copper strip
60
1100
66000
600 X 600 X 3 mm Copper Plate
4
7421
29684
Schedule - 1 B - Part b - ESCOM SR 2023-24 Items - Electrical
-
-
-
LT Cable
-
-
-
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
-
-
-
185 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm)
-
-
-
Supply
0.75
760339
570254.85
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
-
-
-
120 to 140 Sqmm
0.75
35505
26629.35
Aluminium End Terminal (Lug)
-
-
-
185 Sqmm
330
42
14157
Part - A - KPWD SR 2023-24 - Electrical
-
-
-
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.
-
-
-
7 AH capacity
2
3261
6522
Fire Extinugisher
-
-
-
Providing ABC Power based MAP 90, 6Kg
-
-
-
Providing 6kg Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 9.40 Kg, empty weight 3.4 Kg, Can Height 480MM, Diameter 160MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,B, C and electrically started Fire, A Rating 3A, B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete IS 15683 and CE Approved
30
2550
76500
Providing 4.5Kg CO2 Wheel Type
-
-
-
Providing 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees,Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved, 1YearWarranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete
30
8500
255000
Providing Water - 9 Ltr - Stored Pressure
-
-
-
Providing 9 Ltr Water type Fire Extinugisher, Stored Pressure Type, Pressur Gauge,Gross Weight 15.1kg. empty weight 6.1kg Can Height 615MM, Diameter 175 MM,Discharge Time less than 120 Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 6 Meters, applicable on Class A Fire, A Rating 3A, Can Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating,External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 2.OM M, lS 15683 and CE Approved. Years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour,usage charges of machinery complete as per specifications. complete
50
9100
455000
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete
4
1500
6000
Part - B- DSR 2022 - Electrical
-
-
-
FIRE PUMP EQUIPMENT & HYDRANT SYSTEM
-
-
-
Main Fire Pump
-
-
-
(A) Supplying, installation, testing and commissioning of Electric driven terrace Pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
-
-
-
(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS: 1520
-
-
-
(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
-
-
-
(D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
-
-
-
(E) Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
900 LPM at 35 m Head
2
89301
178603.64
CONTROL PANELS
-
-
-
Fabrication, supply, lnsallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required:
-
-
-
INCOMING
-
-
-
250A, 50kA 4 Pole MCCB, lcs=100% lcu rating
-
-
-
Digital Voltmeter 0-500V with selector switch
-
-
-
Digital Ammeter (0-250 A) with selector swtich & CTs etc.
-
-
-
LED type RYB phase indicating lamps, ON, OFF, trip indicating
-
-
-
lamps
-
-
-
Set of Copper Bus Bar 300A
-
-
-
OUTGOING
-
-
-
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
-
-
-
MAIN FIRE PUMP
-
-
-
125 A, 50kA TPN MCCB, lcs=100% lcu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventer complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
2
215436
430872.82
Supplying and drawing following sizes of FRLS PVC insulated
copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 X 1.5 Sq.mm
500
61
30685
4 X 4 Sq.mm
550
241
132605
3 X 6 Sq.mm
350
266
93282
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
500
112
56110
25 mm
550
127
69916
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required:
-
-
-
100 m dia
8
9687
77502.08
Providing, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes as required:
-
-
-
100 m dia
12
5845
70141.08
Providing, installation, testing and commissioning of stainless steel Y-Strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
100 m dia
4
5842
23369.84
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron Wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required.
-
-
-
Single headed Gunmetal
26
6703
174288.4
Providing & fixing of Pressure switch in M.S pipe line including connection etc. as required.
4
1355
5421.64
Providing & fixing flow switch in following sizes M.S pipe line including connection etc. as required.
-
-
-
100mm dia
4
6587
26350.68
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
100 mm dia
450
2240
1008009
80 mm dia
350
1652
578417
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
Gun Metal
25
4560
114017.5
Hose Reel : - Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
30 m
25
7605
190138.75
Short branch pipe with nozzle : - Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:
-
-
-
Stainless Steel (Grade 304)
25
1457
36427.75
Hose cabinet
-
-
-
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. Set
25
15994
399872
Short branch pipe with nozzle : - Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection confirming to IS 904 as required:
-
-
-
2 Way - 100 mm dia M.S. Pipe
4
5910
23643.4
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
4
1158
4632.6
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:
-
-
-
100 mm dia
4
12836
51344.24
pressure gauges : - Providing and Position the industrial type pressure gauges with gun matel / brass valves comlet as required
4
1048
4194.24
CONVENTIONAL FIRE DETECTION AND ALARAM SYSTEM
-
-
-
Fire Alaram System Main Control Panel
-
-
-
Supplying, fixing, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventillation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
-
-
-
10 Zone Panel for Fire alaram system
-
-
-
system including connections, interconnections etc complete as reauired.
-
-
-
10 Zone panel for fire alarm system
-
-
-
250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 2 Nos.(one to act as standby)
-
-
-
Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.
-
-
-
Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set.
-
-
-
Amplifier change over switch for inter changing amplifier -1 No.
-
-
-
Monitor panel for loudspeaker complete with output selector,
-
-
-
ON/OFF switch, fuse, visual indications etc. complete as required- 1
-
-
-
No. Gooseneck microphone with stand and ON/OFF switch- 1 No.
-
-
-
Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 set.
-
-
-
Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free batteries -1 set.
1
61711
61711.44
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
25
3393
84844.5
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
25
3073
76844.5
CABLING & WIRING
-
-
-
Supplying & laying of 2x1 .5 sqmm fire survival armoured cable, 600/1 000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
2500
314
786850
Supplying and fixing of following sizes of medium class PVC conduit along with
-
-
-
20 mm
2500
112
280550
Part - C - DSR 2018 - Civil
-
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking storage tank, IS : 12701 marked, with cover and suitable locking pipes but without fittings and the base support for tank.
25000
9
229000
H.P. or L.P. ball valve with polythene floats: 15 mm dia
8
218
1747.44
H.P. or L.P. ball valve with polythene floats: 15 mm dia
25
239
5981
Structural steel such as tees, angles channels and R.S. joists
2.6
4784
12440.06
Part - D- ESCOM SR 2023-24 - Electrical Items
-
-
-
LT Cable
-
-
-
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
-
-
-
16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
-
-
-
Supply
0.1
156026
15602.62
50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm)
-
-
-
Supply
0.1
196870
19687.03
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
-
-
-
2.5 to 25 Sqmm
0.1
22974
2297.46
35 to 95 Sqmm
0.1
34252
3425.29
Aluminium End Terminal (Lug)
-
-
-
16 Sqmm
16
2
35.2
EXTRA ITEMS
-
-
-
MARKET RATE ITEMS - Electrical
-
-
-
Supply, installation, testing and commissioning of power panel made up of 16G sheet steel, aluminium TPN Busbar doors interlock with switches dead front type design metal treatment of dereusting, degreasing, osphating, prime coats and finish paints of approved colour, with all leads and lift and as directed by the Engineer Incomer : 100 A TPN MCCB - 1 No. LED type panel indication lamps RYB colour 1 - set Volt meter 0-600V 1-set CT operated Ammeter and Volt meter 2 - sets Selector stitches for Ammeter and volt meter 2 sets Provisions for 3 phase KWH meter with sealing arrangements - 1 set Bus bar chambers with 100 A Bushbars prior to meter for sealing arrangements after meter for writing to Sub feeders (Colour code shall be followed strictly for all phases) Out going : 63 A TPN MCB - 6 nos. 40 A TPN MCB - 6 Nos. 32 A DP MCB - 2 Nos. 6 way conductor Termonal blocks - 14 sets
1
171322
171322.77
Approval of Fire Fighting Installations & Fire Detailed Fighting Installation Drawings from Karnataka State Fire and Emergrency Services Department. Approved, drawing. Submission of application along with necessary, Submission of document,Getting report of fire department authority,Submission of fire schematics to the fire department along with necessary documents,Submission of all document to the fire department for inspection...
1
350000
350000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%