Rail Wheel Factory Tender

1Dismantling of 10" pitch main chain. (Approx 210 Mtrs) 2Replacement of complete wear plates on upper track and defective wear plates on lower track.. (Total length on upper & lower track Approx. 210 Mtrs.) 3Replacement complete square rod on upper track & defective square rods on lower tracks (Total length on upper & lower track Approx. 210 Mtrs.) 4Replacement of return track 1 tail and drive end conveyor pieces. 5Provision of wear plate screws (6 X 30 MM) 6Replacement of damaged structure and supports. (Approx 2 Meters length) 7Replacement of escapement arm, pin, bushes and guides. 8Fitment of 10" pitch main chain. 9Replacement of drive triplex/duplex chains and defective sprockets. 10Replacement of drive belts and defective drive pulleys. 11Servicing of RC Fan assembly. (Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft) 12Painting of entire conveyor with aluminum paint. 13Disposal of released material to earmarked place. Rates are inclusive of GST

1Dismantling of 10" pitch main chain. (Approx 210 Mtrs) 2Replacement of complete wear plates on upper track and defective wear plates on lower track.. (Total length on upper & lower track Approx. 210 Mtrs.) 3Replacement complete square rod on upper track & defective square rods on lower tracks (Total length on upper & lower track Approx. 210 Mtrs.) 4Replacement of return track 1 tail and drive end conveyor pieces. 5Provision of wear plate screws (6 X 30 MM) 6Replacement of damaged structure and supports. (Approx 2 Meters length) 7Replacement of escapement arm, pin, bushes and guides. 8Fitment of 10" pitch main chain. 9Replacement of drive triplex/duplex chains and defective sprockets. 10Replacement of drive belts and defective drive pulleys. 11Servicing of RC Fan assembly. (Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft) 12Painting of entire conveyor with aluminum paint. 13Disposal of released material to earmarked place.Rates are inclusive of GST

1Dismantling of 10" pitch main chain. (Total length Approx. 185 Mtrs.) 2Replacement of complete wear plates on upper track and defective wear plates on lower track (Total length on upper & lower track Approx. 185 Mtrs.) 3Replacement complete square rod on upper track & defective square rods on lower tracks. (Total length on upper & lower track Approx. 185 Mtrs.) 4Replacement of return track tail and drive end conveyor pieces. 5Provision of wear plate screws (6 1 X 30 MM) 6Replacement of damaged structure and supports (Approx 3 meters length) 7Fitment of serviced/new 10" pitch main chain. 8Replacement of drive triplex/duplex chains and defective sprockets. 9Replacement of drive belts and defective drive pulleys. 10Replacement of escapement arm, pin, bushes, cylinder and guides. 11Servicing of RC Fan assembly.(Servicing includes replacement of bearings,belts,defective pulleys & dynamic balancing of impeller along with shaft). 12Painting of entire conveyor structure with two coats of Aluminium paint. 13Disposal of released material to earmarked place. Rates are inclusive of GST