Public Works Department Tender

Item No. 4.17 of PWD vol-III - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Page No. 26, Item No. 4.17 of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 5.1 (A) - Prime Coat over WMM/WBM (i) Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(Page No. 31, Item No. 5.1 (A) of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 5.3 of PWD vol-III - Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom (Page No. 31, Item No. 5.3 of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 5.11 (C) - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-40, @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects ( vol-III Page No. 35, Item No. 5.11 (C) ) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 5.14 (C) - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Page No. 36, Item No. 5.14 (C) of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 3.6 - Construction of Subgrade and earthen Shoulders. Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Page No. 17, Item No. 3.6 of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 8.6 - Retro-Reflectorised Traffic Signs Providing and fixing of retro-eflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022.iv 60 cm equilateral triangle (Page No. 64, Item No. 8.6 of PWD vol-III Common SR 2023-24 ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

I.NO. 8.6 A (xii) - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 60 cm x 45 cm rectangular ( Vol.3, P No.65- I.NO. 8.6 A (xii) Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

P No.65- I.NO. 8.8 - Direction and Place identification Signs with size more than 0.9m2sizeBoard. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 gradecement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ( Vol.3, P No.65- I.NO. 8.8 Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

I.NO. 8.48 - Chevron Boards Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2022 & ASTM D 4956-09 specification & fixed over 3 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on 75 mm dia OR 75x75x6mm Mild steel with clear height of not less than 2.1 m from the ground level to the bottom of the Sign board & 60 cm below ground level. The sign post should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and white colour with bands of 30 cm height, firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials, equipment,machinery & Labour with all leads and lifts for satisfactory completion of the work as directed by Engineer incharge.( Vol.3, P No.76- I.NO. 8.48 Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 8.15 - Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(Page No. 67, Item No. 8.15 of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Item No. 8.43 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.(Page No. 74, Item No. 8.43 of PWD vol-III Common SR 2023-24) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

I.NO.8.52 - Providing Water based glossy paint (Green certified product) toKerb Stones as per IS 164:2015 technical specifications includingcleaning & surface preparation.(VOL.III,P No.74- I.NO.8.52 ) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

I.NO. 8.51 C - Providing and Laying of Rumble strips with Two component cold plastic with Primer coating rolled on surfacing material solvent free, high build two pack seamless, tough, skid resistant,for material to give total width of 500 mm and height of 10 mm. Ramp provided to give width of 145 mm, width of ribs to be 55mm laid at C/C distance of 35 mm.For these specialised markings high refractive index glass beads of Ri 1.6 are recommended @ 350g/m2. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on the edge lines, including surface cleaning and cost of all materials etc. complete.(VOL.3,P No.78- I.NO. 8.51 C) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work