Public Works Department Tender

S No.5.7, P No.9, Vo.2 - Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.14.2.1, P No.131, Vo.2 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.14.7.1, P No.131, Vo.2 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.9.10 , P No.60, Vo.2 - Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black ofm any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.9.38, P No.65, Vo.2 - Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.10.1.3, P No.113, Vo.5 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 50mm dia, 6kg/sqcm & class 5 ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

PWD SR 2023-24, S No.10.1.1, P No.113, Vol5 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 25mm dia, 10 kg/sqcm & class 5 ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

PWD SR 2023-24, S No.13.17.1, P No.120, Vo.2 - Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.13.59, P No.65, Vo.2 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

I No.12.98.2, P No.113, Vo.2 - Providing and fixing factory made pre fabricated non monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 and reinforced with 1.70 kg of TMT steel reinforced with 3 No. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 cm c/c in triangle shape per meter length of door frames, including cost of steel and fabrication charges having 4 No. of 304 Grade Stainless Steel hinges plate attachment made of 165 mm x 25 mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws made out of 304 grade stainless steel screws and MS square nuts of size 8 x 8 square and length 10 mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 32 mm, 21 days tank immersed curing including cost of labour, materials, usage charge of machinery complete excluding the cost of door fixtures as per the direction of Engineer. Cross section of 65 mm x 125 mm ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

I No.12.53, P No.105, Vo.2 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

I No 11.3, P No.77 Vo.2 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

I No 11.35.2.2, P No.88Vo.2 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

I No 11.37.1, P No.89Vo.2 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.8.9 P No.42, Vo.2 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) anda top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge to brick masonry includingrounding off corners wherever required smooth rendering, providing andremoving scaffolding, including cost of materials, labour, curing completeas per specifications and as per directions of Engineer-in-charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

Item No 8.33.2 Page No 46 Vol-2 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

Item No 8.33.3 Page No 46 Vol-2 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.8.54.2, P No.50, Vo.2 - Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additionalcoats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.8.30, P No.46, Vo.2 - Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and includingpriming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly broomingthe surface to remove all dirt, dust, mortar drops and foreign matterincluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directionsof Engineer-in-charge ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.8.21, P No.44, Vo.2 - Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer in-charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.7.32.1 P No.42, Vo.2 - Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks only ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.19.27.2, P No.189, Vo.2 - Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge Asbestos cement sheet ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.7.38, P No.26, Vo.2 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

S No.11.16.2, P No.82, Vo.2 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.