Public Works Department Tender

13.28.1 - Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. - 15 mm nominal bore, weighing not less than 32 g

13.28.2 - Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. - 20 mm nominal bore, weighing not less than 40 g

13.28.3 - Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. - 25mm nominal bore, weighing not less than 62 g

14.62b - Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

13.8.2.2 - Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 20 mm nominal bore

13.31.1 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 15 mm nominal dia Pipes

13.31.2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 20 mm nominal dia Pipes

14.48b - Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

14.54b - Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

14.55b - Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Premium

14.77b - Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

14.28.2.2 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe : 40 mm dia

22.15.10 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm

12.65 - Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

14.89b - Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Premium

13.4.2 - Providing and fixing brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

13.33.3 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia Pipes

13.33.2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 20 mm nominal dia Pipes

14.36.2 - Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g

8.51 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.

8.39 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

20.56 - Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per specifications.

8.77 - Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

20.59 - Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications.

8.41 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

19.22.1 - Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 mm

9.12.2 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

19.56 - Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

7.41 - Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between mainT at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

19.59 - Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge to the appropriate disposal area.

12.5 - Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours continuously with air compressor or suitable pump as per specification, including the cost of transportation charges, crew charges, cost of consumables etc. complete

13.49.2 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months 10 HP monobloc motor rewinding

13.1.7 - Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) For all types of submersible pumpsets above 7.0 HP and upto 7.5H.P.

22.15.7 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm

PWD SR 2023-24 - Carpenter Class I (with tools)

SR 2023-24 - Licenced plumber with tools

SR-2023-24 - Supplying Mazdoor Light for Cleaning of terrace including removing grass dust wall surfaces cleaning,roof slab, canopy, portico, chejja cleaning , Rain water pipes cleaning and compound wall surfaces etc

8125 - Providing and fixing Jaguar make following water supply and sanitary fittings including groove cutting in B.B.masonry and redoing in C M. 1:3 with teflon tape and other accessories including labour charges, transportation with all lead and lift etc., complete as per directions of the Engineer in charge - Soft closing seat cover to EWC-Cat No CNS WHT-WC S2

6378 - Supplying and fixing "JAGUAR" make, C.P.Health Faucet Cat No.573 with 1.00m tube and hook including necessary screws, accessories etc, complete, including cost of all materials, labour charges, with all lead and lift, loading and unloading. transportation, machineries and all other incidental charges for successful completion of the work as per directions of the Engineer-in-charge of the work (ALD-563)

4431 - Supplying & fixing of Wardrob lock, including cost of all materials, loading and unloading including all other taxes incidental charges etc., as per specification, as per the direction of the Engineer-in-charge of work

4082 - Providing and fixing curtains rods of size 25mm dia, Stainless steel of heavy guage pipe with stainless steel and brackets and stainless steel supporting double brackets and L brackets wherever necesary of approved design. Work including cost of all material, labour, charges transportation and all other incidental charges for successful completion of the work and as per the directions of Engineer-in Charges of the work

1945 - Cleaing of glazed tiles using floors and surfaces cleaners non corrosive with chemicals Hydrocloric acid, butyl Oley tamine and other which are soluble and capable of removing hard and soft stains and dirt as oer direction of Engineer-incharge of work