Public Works Department Tender

KSRRB M400-17. Providing, laying, spreading and compacting cushed stone aggregates of granite I trap I basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 KSRRB M400- Construction of Median and Island with soil taken from Roadway cutting ---- with all lead and lift, loading and unloading charges, including cost and conveyance of all materials, hire charges of all machinery and equipment, transportation charges, all other incidental charges etc., complete for finished item of work including cost of materials etc., complete as per standard technical detailed specifications and as per the directions of the Engineer in charge of the work.

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications. - -do- with OPC at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum. ---- with all lead and lift, loading and unloading charges, including cost and conveyance of all materials, hire charges of all machinery and equipment, transportation charges, all other incidental charges etc., complete for finished item of work including cost of materials etc., complete as per standard technical detailed specifications and as per the directions of the Engineer in charge of the work.