Public Works Department Tender

11.36.1 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge: Pre- laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

11.37.1 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float Glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

11.47 - Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

11.46.2 - Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with sS screws etc .complete as per direction of Engineer-in-Charge.: Powder coated minimum thickness 50 micron aluminium tubular handle bar including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

11.51 - Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

7.40.3 - Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. - 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, madeof Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

APPROVED DATA RATE - COMPUTER TABLE: MADE OUT OF 19MM BLOCK BOARD WITH LAMINATE, WITH EDGE BEADING, ONE DRAWER, ONE KEYBOARD TRAY AND CPU STAND. SIZE: 4’ X 2’ X 2.5’ ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

Approved Data Rate - REVOLVING LOW BACK EXECUTIVE CHAIR ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.