Public Works Department Tender

1.10 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (PWD SR 2023-24 V-1, P.No. 7, 1.10) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

1.8 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work(PWD SR 2023-24 V-1, P.No. 7, I.No. 1.8) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

3.5 - Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead .(PWD SR 2023-24 V-III, P.No. 17, I.No. 3.5) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

4.17 - Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(PWD SR 2023-24 V-III, P.No. 26, I.No. 4.17) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

5.1(i) A - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.( PWD SR 2023-24 Vol-III P.No.31 I.No.5.1(i) A) Prime Coat over WMM/WBM ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

5.3(i) - Tack coat on Bituminous surface: Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom( PWD SR 2023-24 Vol-III P.No.31 I.No.5.3(i)) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

5.12(c) - Dense Graded Bituminous Macadam Grading -II for traffic 20 MSA: Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects.(PWD SR 2023-24 Vol-III P.No.35 I.No.5.12(c)) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

5.16(c) - Bituminous Concrete Grading II for traffic 20 MSA: Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.( PWD SR 2023-24 Vol-III P.No.38, I.No.5.16(c)) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

8.5 (A) iv - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. ( iv ) 60 cm equilateral triangle ( PWD SR 2023-24 Vol-III P.No.64 I.No. chapter 8.5 (A) iv- etc., ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

8.5 (A) viii - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022.( viii) 60 cm circular ( PWD SR 2023-24 Vol-III P.No.64 I.No. chapter 8.5 (A) viii- etc., ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

8.7 - Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ( PWD SR 2023-24 Vol-III P.No.65 I.No. chapter 8.7) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

8.48 - Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2022 & ASTM D 4956-09 specification & fixed over 3 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on 75 mm dia OR 75x75x6mm Mild steel with clear height of not less than 2.1 m from the ground level to the bottom of the Sign board & 60 cm below ground level The sign post should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and white colour with bands of 30 cm height, firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials, equipment,machinery & Labour with all leads and lifts for satisfactory completion of the work as directed by Engineer incharge.(PWD SR 2023-24 Vol-3 P.No.76 I.No.8.48 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead