Public Works Department Tender

3.1 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. Ref to MoRT&H : IRC - 301 ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

20.90 - Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

19.55 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

8.3.1 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

8.33.1 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

15.2 - polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

11.6.1 - supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

13.4.2 - Providing and fixing brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

13.50.3 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia Pipes ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

13.50.4 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 32 mm nominal dia Pipes ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.

2.1.5 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates ---- Including cost and conveyance of all materials, labour, hire charges of machinery and equipment with all lead and lifts, loading and unloading charges, etc., complete as directed as per specification and direction of the engineer in charge of the work.