Public Works Department Tender

Vol 2 SR It No. 8.17.2 Page No. 44 - Providing Raised and cut pointing: Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

Vol 3 SR It No. 8.42.3 Page No. 74 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size

Vol 1 SR It No. 1.23 Page No. 11 - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.

Approved Rate - Standard swing 2 seater Main Frame 1inch NB Top bar 2inch NB Rubber Chain frp 4 MM Thickness (Area 9 x 4)(Area: 2.8m*1.3m, Leg support: 40mm NB pipe, Top Bar: 50mm NB pipe, Seat: FRP bucket seat, Bearing Heavy Duty Ball Bearing, Suspension: 6mm electro galvanised chain including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications

Approved Rate - Monkey bar Area:3.2m, Height: 2.5m, Frame: 40mm NB GI pipe, Rings: 20mm NB GI pipe) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications

Approved Rate - Dual pipe side by side see saw Main(Area: 1m*1.9m, Lever: 70mm NB pipe, Column: 25mm NB pipe, Seat: moulded FRP, Bearing: Heavy duty pipe bearing) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications.

Approved Rate - Two way slide GI pipe ; 12 gauge FRP Slide 3 to 4MM Thickness, ladder; GI sheet steps including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications.

Approved Rate - Merry go round with cross bars (Area: 1.2m/1.5m/1.8m dia, Height: 1m, Platform: non skid aluminum plate, Outer ring: 35mm NB pipe, Hand rail: 25mm NB pipe, Bearing: Triple Heavy Duty Bearing permanently lubricated and with water sealant) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications

Approved Rate - Providing and Fixing RCC Garden Benches

Vol 2 SR It No. 8.33.3 Page No. 47 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Vol 2 SR It No. 8.23.2 Page No. 45 - Providing Colour washing such as green, blue or buff to give an even shade :New work (two coats) with a base coat of whiting with colour of approved quality, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Vol 2 SR It No. 9.25 Page No. 63 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Approved Rate - Supply & fixing of HD Health Walker : All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burns. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are poder cossed using AKZO Nobel-Greal Wall Powder to the thickness of 80-120 micrors. All metal parts are to be tested in sall spray machine that uses a 5% NaCI. solution in accordance to ISO7227 to speed up corrasion for 3000 hrs. Footplates made of alloys of Nylon heaving good thermal stability. Internal Limited means no bump stops or crush points. Bearings: Maintenance free ball bearings. Scope of delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified. International certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN16630 certificates must be in the name of tendering party and not any third party. All products must clearly display the GS mark as issued in the EN16630 safety certificates . Size (L*W*H) 1070MMx615 MM x1360 MM. Capacity 1 person - (Koochie Make/equivalent)

Suppy & Fixing of Seated Chest Press: All Tubular - Suppy & Fixing of Seated Chest Press: All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using AKZO Nobel - Great Wall Powder to the thickness of 80-120 microns. Al metal parts are to be tested in salt spray machine that uses a 5% NaCL solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. The seat and backrest is to be made from Rotomoulded LLDPE. Bearings: Maintenance - free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide Safety : All products must be teste and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN16630 certificates must be in the name of tendering party and not any third party. All products must clearly display the GS mark as issued in the EN16630 safety certificates. Size (L*W*H) 1955 MM x 733MM x 2058 MM, Weight 86.6 KG, Safety Area 5545X4470mm, Capacity 2 persons (Koochie Make / Equivalent)

Supply and fixing of Bicycle. Metal: All tubular s - Supply and fixing of Bicycle. Metal All tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel Great Wall powder to the thickness of 80 120 microns. All metal parts are tested in our salt spray macjine that uses a 5 NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. Size L x W x H 1000 x 498 x 1290mm, Weight 51.5 KG, Safety Area 3400 x 3498 mm, Capacity 1 Person Koochie Make / Equivalent

Supply & fixing of HD Waist Twister : All Tubular - Supply & fixing of HD Waist Twister : All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are sealloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burns. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using AKZO Nobel - Great Wall Powder to the thickness of 80-120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NaCL solution in accordance to ISO7227 to speed up corrusion for 3000 hrs. Footplates made of alloys of Nylon having good thermal stability. Internal Limited means no bump stops or crush points. Bearings: Maintenance - free ball bearings. Scope of delivery : I completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Safety : All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN16630 certificates must be in the name of tendering party and not any third party. All products must clearly display the GS mark as issued in the EN16630 safety certificates. Size (L*W*H) 1460 MM x 1310 MM x 1150 MM. Capacity 3 persions - (Koochie Make/equivalent)

Vol-I I No. 1.14.1 Page No. 8 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m

Vol-I I No. 2.1.4 Page No. 8 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates

Vol-II I No. 11.16.2 Page No. 82 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Vol-II I No. 7.1.1 Page No. 21 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge 0.63 mm thick with zinc coating not less than 275 g/ m²

Approved Rate - KKRDB Name Board