Public Works Department Tender

KSRRB M300-53 : Construction of embankment with approved material Gravel/Murrum with spreading, grading to required slope and compacting to meet requirement Table 300-2 (including cost of gravel / murrum, watering charges and compaction by vibratory roller to 95% of proctors density) as per MORTH specification No.305, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Construction of granular sub-base Grading-V as Sub-base and drainage layer by providing coarse graded crushed stone aggregates of granite/trap/basalt material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98% proctor density, Clause 401 of MORTH V Revision, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M400-17 : Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH specification No.406, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M500-6 : Providing and applying primer coat with Slow Setting bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60kg/sqm using mechanical means complete as per MORTH specification No.502, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M500-10 : Providing and applying tack coat using 80/100 grade bitumen (VG10) in boiler fitted with spray set distributor at the rate of 0.20kg per sqm on the existing prepared bituminous surface cleaned with mchancial broom by using bitumen 80/100 on primed surfaces, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB 500-11 : Providing and laying bituminous macadam on prepared surface with crushed coarse aggregates as per design mix formula for base / binding course including loading of aggregates with FE loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixd material in tipper to paver and laying mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density, but excluding cost of primer / tack coat as per MORTH/Chapter-5 by using 40/60 TPH capacity HMP with Mechanical paver Grade-II (50 to 75 mm) with 3.3% VG-30 Bitumen, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M500-18 : Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.508 complete in all respects by using 40/60 TPH capacity HMP with Mechanical Paver Grade-II (25 to 30mm) with 5% VG-30 Bitumen, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M800-13 : Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads at 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per MORTH specification No.803, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB MS00-35 : Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS (Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000kg tested in accordance to specifications of Category-A of MORTH Circular No.RW/NH/33023/10-97-DO-III Dt.11-06-1997. The height, width and length shall not exceed 50, 100 and 102mm and with minimum reflective area of 13Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19mm and height not less than 30mm) from the body is to be a minimum value of 500Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer recommendation and complete as directed by the engineer, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45x45x60cms., 60cms. below ground level as per approved drawing 600mm., equilateral triangle -TYPE XI, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Road Humps / speed breakers for control of vehicular speeds on roads Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble stones 60mm thick, having road hump dimension of 1mtr. (width)X0.15mtr (height) rectangular sections and ramp on either side of road hump of 0.85mtr (wide), including providing WBM (2 layers) for shoulder portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP 67 - 2010 (for details refer IRC 99-1988) - For 2 lane for formation width of 12mtrs. using SDBC mix material, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M800-14.2 : Reinforced cement concrete M-15 Grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc., including additional M-15 concrete pedestal of 0.2mt. height above Ground level as per MORTH specification No.804, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M800-14.3 : Reinforced cement concrete M-15 Grade Hectometer stone of standard design as per IRC:26-1980, fixing in position including painting and printing etc., including additional M-15 concrete pedestal of 0.2mt. height above ground level as per MORTH specification No.804, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Direction and Place Identification Signs upto 0.9 sqm Size Board : Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm. supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45x45x60cms, 60cms. below ground level as per approved drawing, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M200-21.1 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials to a final place and stacking the serviceable materials to a required dimensions (ix)Removal of all types of Hume pipes and stacking including earthwork and dismantling of masonry works – (A)Upto 600mm dia., with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2100-2.1 : Earth work in excavation for foundation of structures as perdrawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete -Mechanical Means (i)Depth upto 3mtrs. as per MORTH specification No.304, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2900-1 : Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing as per MORTH specification No.408, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2200-6 : Providing TMT steel Bars Fe-500 reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) as per MORTH specification No.1600 and 2200, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320kgs, 20mm and down size graded granite metal coarse aggregate @ 0.69cum and fine aggregates @ 0.46cum machine mixed with super plasticisers @ 3lts confirming to IS 9103-2008, concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, curing, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Providing and laying reinforced cement concrete pipe NP3 900mm. dia. for culverts including pointing ends and fixing collars with cement mortar 1:2 as per specification No.KSRB 1000, 2300 as per MOST specification No.1000 / 2300, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, curing, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Providing and laying reinforced cement concrete pipe NP3 300mm. dia. for culverts including pointing ends, and fixing collars with cement mortar 1:2 as per specification No.KSRB 1000, 2300 as per MOST specification No.1000 / 2300, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, curing, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M300-53 : Construction of embankment with approved material Gravel/Murrum with spreading, grading to required slope and compacting to meet requirement Table 300-2 (including cost of gravel / murrum, watering charges and compaction by vibratory roller to 95% of proctors density) as per MORTH specification No.305, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300kgs. with 20mm and down size granite metal coarse aggregates at 0.69cum and fine aggregates at 0.43cum machine mixed, well compacted for walls and bottom including centering, shuttering, excluding cost of steel as per MORTH specification No.1500, 1700, 2200, Wall and bottom thickness 15cms, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M200-12.3 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials to a final place and stacking the serviceable materials to a required dimensions - Prestressed / Reinforced cement concrete grade M-20 and above as per MORTH specification No.202, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M200-15.2 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials to a final place and stacking the serviceable materials to a required dimensions - Dismantling Stone Masonry - Rubble stone masonry in cement mortar as per MORTH specification No.202, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2100-2.1 : Earth work in excavation for foundation of structures as perdrawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material - Mechanical Means (i)Depth upto 3mtrs. as per MORTH specification No.304, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, as per specification No.KBS, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2100-13 : Plain / Reinforced Cement Concrete M15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.84cum and fine aggregates @ 0.56cum in Open Foundation complete as per Drawing and Technical Specifications as per MORTH specification No.1500, 1700 and 2100, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2300-14 : Providing TMT steel Bar Fe-500 reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) as per MORTH specification No.1600 and 2200, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2100-15.2 : Plain / Reinforcement Cement Concrete M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.46cum, with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-2008, in Open Foundation complete as per Drawing and Technical Specifications Case-II : With Batching Plant, Transit Mixer and Concrete Pump as per MORTH specification No.1500, 1700 and 2100, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

K8RRB M2200-5.12 : Providing and laying Design mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.7cum and fine aggregates @ 0.47cum with superplastisiser @ 31ts confirming to 189103-1999 Reaffirmed-2008 - (i)Upto 5m height, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2300-3.1 : Furnishing and Placing Reinforced / Prestressed cement concrete in super-structure as per drawing and Technical Specification complete as per specifications - RCC with OPC cement design mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.7cum and fine aggregates @ 0.47cum, with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete Mixer as per MORTH specification No.1500, 1600 and 1700 - Height upto 5mtrs., with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2700-7 : Reinforced cement concrete M30 approach slab including reinforcement @ 70kg/cum and formwork complete as per drawing and Technical specification as per MORTH specification No.1500, 1600, 1700 and 2704, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2300-16 : Providing and laying Cement concrete wearing coat with OPC cement design mix M30 @ 360kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.46cum. and reinforcement at 75kg/cum with superplastisiser @ 31ts confirming to IS9103-1999 Reaffirmed-2008 including cost of reinforcement complete as per drawing and Technical Specifications as per MORTH specification No.2702, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2600-3 : Providing and fixing 250mm wide, 20mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification as per MORTH specification No.2605, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2600-6 : Providing and laying of asphaltic plug joint to provide for horizontal movement of 25mm and vertical movement of 2mm, depth of joint varying from 75 to 100mm, width varying from 500 to 750mm (in traffic direction), covered with a closure plate of 200x6mm of weldable structural steel conforming to IS: 2062, asphaltic plug to consist of polymer modified bitumen binder, carefully selected single size aggregate of 12.5mm nominal size and a heat resistant foam caulking/backer rod, all as per approved drawings and specifications, as per MORTH specification No.2600, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2200-8 : Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing force. Complete as per drawing and Technical Specifications as per MORTH specification No.2706 and 2200, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2200-9 : Providing and laying of Filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MORTH specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification as per MORTH specification No.2504.2.2, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2500-4.1 : Providing and laying Pitching stones of size 0.3x0.3x0.3mtrs. on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications - Stone / Boulder as per MORTH specification No.2504, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

KSRRB M2500-5.1 : Providing and laying Flooring with Rubble stone in CM 1:3 over a bed of 1OOmm thick CC bed of 1:2:4 mix proportion as per MORTH specification No.2505, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.