Public Works Department Tender

V-III P.No-18, I No -3.11 - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 t smooth wheeled roller, complete as per clause 310. (V-III P.No-18 ; I No -3.11 ---- including cost and conveyance of all materials, loading

V-III Page No 23 Item No. 4.1 V - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -V Material (V-III Page No 23 Item No. 4.1 (V) ---- including cost and conveyance of all materials, loading

V-III P.No 26, I No - 4.17 - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(V-III P.No 26 ; I No - 4.17 )" ---- including cost and conveyance of all materials, loading

V-III P.No -31 I No - 5.1 A (i) - Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. ( V-III P.No -31 I No - 5.1 A (i) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-III P.No- 31 I.No: 5.4 - Tack coat on Granular surface treated with primer Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface ( SR 2023-24 V-III P.No- 31 I.No: 5.4 )" ---- including cost and conveyance of all materials, loading

SR 2023-24, VOL 3, P No:33, Item No:5.8 C - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (SR 2023-24, VOL 3, P No:33, Item No:5.8 C) ---- including cost and conveyance of all materials, loading

SR 2023-24 VOL 3 P No:43 Item No:5.31 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision.(SR 2023-24 VOL 3 P No:43 Item No:5.31) ---- including cost and conveyance of all materials, loading

V - III P.No-17 I.No 3.6 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (V - III P.No-17 I.No 3.6) ---- including cost and conveyance of all materials, loading

V - III P.No- 67 I.No 8.15 - Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. (V - III P.No- 67 I.No 8.15 ) ---- including cost and conveyance of all materials, loading

V - III P.No- 74 I.No 8.43 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (V - III P.No- 74 I.No 8.43 ) " ---- including cost and conveyance of all materials, loading

Vol- III , P.No- 64 I.No 8.5 (iv) - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022.60 cm equilateral triangle (Vol- III , P.No- 64 I.No 8.5 (iv)" ---- including cost and conveyance of all materials, loading

SR 2023-24,Vol:III,Item No:8.16 (i) - Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (i) 5th kilometre stone (precast) (SR 2023-24,Vol:III,Item No:8.16 (i) ---- including cost and conveyance of all materials, loading

Vol- III , P.No- 67 I.No 8.16 (ii) - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) (Vol- III , P.No- 67 I.No 8.16 (ii) ---- including cost and conveyance of all materials, loading

Vol- III , P.No- 67 I.No 8.16 (iii) - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone (precast) (Vol- III , P.No- 67 I.No 8.16 (iii) ---- including cost and conveyance of all materials, loading

Vol- III , P.No- 65 I.No 8.7 - Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. (Vol- III , P.No- 65 I.No 8.7) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I P.No- 8 I.No 1.14.1) - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( SR 2023-24 V-I P.No- 8 I.No 1.14.1) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I P.No 15 I.No 2.1.3 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma chine mixed, laid in layers not exceeding 150 mm thickness, well com pacted using plate vibrators, including all lead & lifts, cost of all materi als of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ( SR 2023-24 V-I P.No 15 I.No 2.1.3) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I P.No 16 I.No.2.4.2) - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( SR 2023-24 V-I P.No 16 I.No.2.4.2) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I P.No 16 I.No.2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( SR 2023-24 V-I P.No 16 I.No.2.5.2) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I P.No-18 I.No:2.11 h) - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures ( SR 2023-24 V-I P.No-18 I.No:2.11 h) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I , P.No -111 I.No: 3) - Appendix I Additionalities for Formwork, Centering & Scaffolding Foundation, Sub structure of Cross drainages Qty as per I. No 20 ( Percentage on finished rate of concrete per m3) SR 2023-24 V-I , P.No -111 I.No: 3) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-I , P.No -111 I.No: 3 - Appendix I Additionalities for Formwork, Centering & Scaffolding Foundation, Sub structure of Cross drainages Qty as per I. No-21 ( Percentage on finished rate of concrete per m3)SR 2023-24 V-I , P.No -111 I.No: 3 ---- including cost and conveyance of all materials, loading

V-III P.No-146 I.No16.15.C) - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6 (V-III P.No-146 I.No16.15.C) ---- including cost and conveyance of all materials, loading

SR 2023-24, V-III, Item No:8.25(i)) - Metal Beam Crash Barrier (i) Type - A, ""W"" : Metal Beam Crash Barrier Providing and erecting a ""W"" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 (SR 2023-24, V-III, Item No:8.25(i))" ---- including cost and conveyance of all materials, loading