Public Works Department Tender

PWD SR 2023-24 Vol 1, INO 2.2.3, Pg No. 15 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

P.NO 111 SL.No 1 (a), Add-1, PWD SR 2023-24 V-1 - Additionalities for formwork, Centring & Scaffolding,( Add 8% on finished rate of concrete per m3) Footings,pedastal,Grade beam & columns For Foundation (The cost of steel reinforcement & formwork to be paid separately) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 2.5.1, Pg No. 16 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - Design Mix M 25 using 20 mm nominal size graded crushed coarse aggregates ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 2.5.2, Pg No. 16 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - Design Mix M 25 using 20 mm nominal size graded crushed coarse aggregates ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

P.NO. 111 SL.No 9, Addendum-1, PWD SR 2023-24 V-1 - Additionalities for formwork, Centring & Scaffolding,( Add 70% on finished rate of concrete per m3) For columns ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

P.NO. 111 SL.No 2, Addendum-1, PWD SR 2023-24 V-1 - Additionalities for formwork, Centring & Scaffolding,( Add 50% on finished rate of concrete per m3) For Plinth Beam ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

P.NO. 111 SL.No 14, Addendum-1, PWD SR 2023-24 V-1 - Additionalities for formwork, Centring & Scaffolding,( Add 60% on finished rate of concrete per m3) For Lintel & Roof beams ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

P.NO. 111 SL.No 15, Addendum-1, PWD SR 2023-24 V-1 - Additionalities for formwork, Centring & Scaffolding,( Add 50% on finished rate of concrete per m3) For Roof slab ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

P.NO. 111 SL.No 19, Addendum-1, PWD SR 2023-24 V-1 - Additionalities for formwork, Centring & Scaffolding,( Add 45% on finished rate of concrete per m3) For Chejja ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 5.4 Pg no. 9 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 1, INO 1.9, Pg No. 7 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 1, INO 2.11a, Pg No. 18 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24Vol 2, INO 6.5, Pg No. 13 - Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 11.5.1, Pg No. 77 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 11.11.1, Pg No. 79 - Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.10, Pg No. 43 - Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.1.2, Pg No. 41 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.2.2, Pg No. 41 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.51, Pg No. 50 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 9.17.2, Pg No. 61 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.22, Pg No. 44 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.28, Pg No. 45 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.19.1, Pg No. 44 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol-2, I.No 11.34A, Pg no. 86 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 8.33.3, Pg No. 47 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 5, I.No. 10.1.6, Pg No.113 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. comcplte for 90mm dia., 6 kg/Sqcm & Class 3 ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 11.28, Pg No. 85 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 Vol 2, INO 15.1, Pg No. 149 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work.