Public Works Department Tender

KSRRB M400-14.1 : Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt specific sizes to water bound macadam specifications including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density - By manual means as per MORTH specification No.404 - Type B 11.2mm for grading-III, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69cum, fine aggregates at 0.46cum, Coarse and fine aggregate conforming to IS:383-2016, with Super plastizer at 3Lts conforming to IS 9103-2008 mixed in a concrete mixer of not less than 0.6cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) and spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, including groove cutting charges, joint filler, separation membrane of impermeable plastic sheet of 125micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine and curing including cost of hire charges of machineries with OPC at 360kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum., with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45x45x60cms, 60cms. below ground level as per approved drawing, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.

Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, CI cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg) RCC top slab with cement concrete M15 with 20mm and downsize granite metal, foundation concrete M5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of curing complete as per specification No.KBS 450x450mm and 450mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, CI cover with frame (light duty) 450x450mm, with all lead, lifts, loading, un-loading charges, including cost of all materials, HoM all Machineries, transportation of materials and machineries to site of work, labour, incidental, equipment charges and implementation of Environmental and Social Safe Guards etc., complete as per specification and as per the directions of Engineer-in-charge for finished of work.