Public Works Department Tender

Code04 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(V-6 ESCOM P.No 52/21.05)

Code05 - Earth work excavation by manual means for drains,canals, waste weir draft,approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatlydressed disposing off or leveling the excavated stuff or sorting & stacking theselected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work (Vol I P.No 6/1.5.1) In ordinary/soft rock without blasting upto 1.5 m depth (0.5*0.75*50)

Code06 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete.(Vol -5 Water Supply 127/11.2.4) Medium Duty GI pipe of 32mm dia

Code07 - Brass Cable Gland 32 mm (Vol-6 ESCOM P.No 28/508/63.02)

Code08 - Aluminium End Terminal Lug (Vol-6 ESCOM P.No 27/471/60.03) 25 Sqmm

Code09 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.(Vol-6 P.No 60/12.57)

Code10 - GI/Copper strips for grounding connections, using necessary fixing materials as required. (Vol 6 P.No 60/25 x 6 mm GI strip)

Code11 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (Vol 6 P.No 17/5.18.8)40Amps TPN

Code12 - Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminium housing with powder coating with IP 65 protection. 1, 200-275V voltage with electronic Driver, PF 0.9, should meet ANSI 2G Vibration test, Compliance to UL/CE with Class I.System rating shall be 50K hrs @ Lumen maintenance of 70%, system efficacy 80lm/w. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency130lm/w at 1W & Fixture Efficiency 80lm/w with nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer ( Vol 6 P.No 46/11.9.7)LED Floodlight 240 W

Code13 - Fixing halogen/metal hallide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (Vol 6 P.No 56/13.5)

Code14 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with suitable approved colour powder coated paint. (Vol 6 P.No 20/5.42.2) 16SWG

Code15 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(Vol 6 P.No 20/5.41.2) 50x50x6mm

Code16 - Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60Amps (Vol 6 P.No 16/5.13.3)

Code17 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (Vol 6 P.No21/5.48)

Code18 - Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. (Vol 6 P.No 5/2.3.4) 4mm2

Code19 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments (5/2.3.3) 2.5 mm2

Code20 - Earth work in surface excavation for stripping, seating of bund, Road way bymeans for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock upto 300mm depth as per drawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.(Vol-I P.No.5/1.2) (1.1*1.1*52+ high mast)

Code21 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. ( Vol-I P.No 15/2.1.2) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (1*1*42)

Code22 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes,labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol-I P.No: 15/2.2.1.) )(1*1*52)

Code23 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Vol-I P.No.18/h)All other type of structures

Code24 - 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995. 3x95 + 1x70 + 1x25 Sqmm Street light (Insulated Messenger cum Neutral)(18/293/42.04)

Code25 - Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control) (53/208/24.03)

Code26 - Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sqmm(18/299/43.01)

Code27 - Fabricating, supplying and erection swaged tubular pole of DOUBLE ARM DECORATIVE STREET LIGHT POLE FOR CENTRE MEDIAN:Supply of 7.00 M high, Cast Iron and MS tubular combination based decorative and ornamental lamp post with decorative double arm bracket as per approved Technical Drawing No: DLP- 3-C-70-302/01 with Bracket Design DBR-C-003-D suitable for suspended light fixture (or) Bracket Design DBR-3-025-D suitable for side mounting of regular LED light fixture. The decorative pole shall have base plate width of 430 mm and 4 nos of pre- punched holes of 22 mm dia suitable for fixing 4 nos x 20 mm dia x 750 mm length foundation bolts confirming to EN8Gr. The Cast Iron parts of the pole shall be built confirming to FG-150 or higher grade and shall have approximate shell thickness of 10-12 mm and MS pipe portions shall be built from medium duty sections onfirming to IS 1998:1161 and protected with 4-coat painting system (Colour: Antique Copper) comprising of one coat each of Epoxy primer, Epoxy Paint, PU Paint and finally topped with PU Lacquer totalling to 55-60 microns to make it absolutely rust and corrosion proof and give a pleasing appearance. The pole shall have inbuilt space for Junction box to allow access to electrical connections and terminations such as Bakelite sheet, MCB and Connectors. Rates to include applicable GST and Transport charges from manufacturer’s production point to project site at Mysuru complete as per approved drawing and approved installation photograph complete.

Code28 - SINGLE ARM DECORATIVE STREET LIGHT POLE FOR PEDESTRIAN: Supply of 7.00 M high, Cast Iron and MS tubular combination based decorative and ornamental lamp post with decorative single arm bracket as per approved Technical Drawing No: DLP- 3-C-70-302/01 with Bracket Design DBR-C-003-S suitable for suspended light fixture (or) Bracket Design DBR-3-025-S suitable for side mounting of regular LED light fixture. The decorative pole shall have base plate width of 430 mm and 4 nos of pre- punched holes of 22 mm dia suitable for fixing 4 nos x 20 mm dia x 750 mm length foundation bolts confirming to EN8Gr. The Cast Iron parts of the pole shall be built confirming to FG-150 or higher grade and shall have approximate shell thickness of 10-12 mm and MS pipe portions shall be built from medium duty sections onfirming to IS 1998:1161 and protected with 4-coat painting system (Colour: Antique Copper) comprising of one coat each of Epoxy primer, Epoxy Paint, PU Paint and finally topped with PU Lacquer totalling to 55-60 microns to make it absolutely rust and corrosion proof and give a pleasing appearance. The pole shall have inbuilt space for Junction box to allow access to electrical connections and terminations such as Bakelite sheet, MCB and Connectors. Rates to include applicable GST and Transport charges from manufacturer’s production point to project site at Mysuru complete as per approved drawing and approved installation photograph complete.(LQR)

Code29 - Supply and fixing of IP65 Rated Decorative Street Light for gardens, pathways, Heritage sites and other city Beautification Applications. 75 Watts LED Albany fitting with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. (Make:- Philips/Crompton /Equivalent) (LED illumination Colour White/Warm White/Half White/any Colour as per direction of engineer)