Public Works Department Tender

Common SR Vol 2 I No. 13.15 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2, I No. 14.16A - Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2, I No. 14.19.1 - Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No. 14.20.1 - Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No. 14.28.1.2 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No20.104 - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No.8.66 - Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No.8.82 - Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, thensurface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this drysurface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish andmelamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No.8.64 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No. 22.24 - Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No. 20.22.2 - Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete 25 mm diameter ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No12.13.1 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No12.51 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (excluding cost of fixtures ) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No20.110 - Repairs to Teak wood chair/Table upto 0.005 m3 of teak wood including cost of all material,labour, complete as per specifications. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No20.112.2 - Replacement of back rest /seat with servicing. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No20.111.3 - Office Chair seat Replacement - foam Base. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.36 - Providing and supplying Queen size 6ft x 5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.37 - Providing and supplying Single size 6ft x 2.5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.33 - Providing & supplying 100% Polyester machine wash capable Blanket 66x90inches with calm and light colors as per direction of Engineer in charge of work. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.32 - Providing and supplying Pillow (Memory foam) with deep sleeping comfort of size upto 70cm x 40cm as per direction of engineer in charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.41 - Providing & supplying Stainless Steel sturdy 3mm thick Thali set with four compartments round shaped with dia upto 30cm as per direction of Engineer in charge of work ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.42 - Providing & supplying Stainless Steel Tumblers with 150ml capacity as per direction of Engineer in charge of work ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No22.28 - Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

Common SR Vol 2 I No.8.75.1 - Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead