Public Works Department Tender

ITEM NO 4.17 Vol 326 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with pavergrader in subbase base course on well prepared surface and compacting with vibratory roller to achieve the desired density

ITEM NO 5.1 A iVol 331 - 5.1 502 A i Prime Coat over WMMWBm Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mechanical means.

ITEM NO 5.32Vol 343 - Tack coat on Bituminous surface Providing and applying tack coat with VG 10 Bitumin using pressure distributor at the rate of 0.20kgm2 on prepared bituminous Surface cleaned with mechanical broom.

ITEM NO 5.8 ii C Vol 333 - 5.8 504 ii Bituminous Macadam Grading II for traffic 20 MSA , C Providing and laying Bituminous Macadam with 4060 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

ITEM NO 5.31Vol 343 - Semi Dense Bituminous Concrete 1 IRC37: 2018 Providing and laying Semi Dense Bituminous Concrete with 4060 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision.

Vol01 2.4.216 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Vol1111sl no.3 - form work for Item no. 10 As per Addendum I , rates for formwork shall be added on percentage basis to the finished concrete item rate. For Foundation, Sub structure of Cross drainages 5 percentage

vol5208 16.61.2 - Supply and fixing of SFRC machinhole cover Heavy Duty made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with all lead and lifts

Vol3 8.1567 - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes

vol3 8.43 Page No: 74 - Supplying and Fixing of Molded Shank Raised Pavement Markers Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RWNH330231097 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 + 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 + 5 degree. The strength of detachment of the integrated cylindrical shanks, of diameter not less than 19 + 2 mm and height not less than 30+ 2 mm from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retroreflectance of the reflecting panel, to the Engineer

ITEM NO 10.3.5Vol5114 - Providing UPVC FOAM CORE pipes conforming to IS 16098 P1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes with cost of elastomeric sealing rings and specials excluding cost of specials with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing etc. complete. for: Pipes of SN4 Self Fit 250mm dia.

ITEM NO 10.3.1Vol5114 - Providing UPVC FOAM CORE pipes conforming to IS 16098 P1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes with cost of elastomeric sealing rings and specials excluding cost of specials with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing etc. complete. for: Pipes of SN4 Self Fit 160mm dia.

ITEM NO 2.21.2Vol522 - Providing house connection with excavation in all types of soils cutting]with machine cutter without damaging the other utilities and Providing]and laying of MDPE pipe PE80PN 12.5 manufactured in accordance]with ISO 44271996 with minimum required strength of 8 Mpa, hydraulic design stress of 6.3 Mpa and with minimum wall thickness of 2.3mmGI pipe by making the bore of 15mm dia. size on the distribution mains using drilling bits or machines only and laying the pipe line at a depth not less than 0.45 mtrs. from the road surface, including providing 40mm dia. "A" class GI pipe as casing over the MDPE pipe from the bore point and upto the entrance of the premises and removing the stone slab covering of the drain and dismantling the size stone masonry wherever necessary and making bore in the wall of the premises. On entering the premises, connection should be continued with 20mm GI pipe by making "U" shape for the meter point below the ground level by making pit with sufficient space for the easy installation and removal of the water meter and providing vertical stand pipes on both sides of the meter. The connection should be secured firmly on the distribution main pipe with SS Brass ferrule of size 12" x 34" and fixing the union joint and gate valve stop cock before the meter point and a reflex valve nonreturn valve should be fixed on the connection after the meter point. All these fixtures should be of standard quality conforming to IS. The compression fittings for MDPE pipes conforming to ISO 14236 and its latest versions. If the connection is of HDPE pipe the work include electric fusion tapping T or saddles, PE 100 black colour pipe of PN 16 For 20mm dia SDR 11 or Higher grade conforming to standards with brass cutter cum flow regulator, water tight cap with O'ring, long spigot for making boretapping suitable to HDPE pipe by Electro fusion welding as per BS EN 122013 & EN 15553 standards. The Product should be tested to comply with BS 6920 for drinking water service in WRC NSF, UK and DVGW certificate, Germany. The Saddle should be manufactured Virgin Compounded PE 100 material. Tapping Tee or Saddles with coupler and compression fittings with cost of GI pipes, as per diagram, all specials such as GI tee, GI elbow, GI coupler, stopper with appurtenances, and brass or SS tap The excavated trench should be refilled with soft selected earth and the dismantled masonry of the drain should be reconstructed with available size stones in CM 1:8 and providing coping in CC 1:3:6 wherever required and the stone slab covering should be refixed in position with pointing in CM 1:3 and also the bored wall of the premises should be redone to the original position and the rates are inclusive of the cost of all the materials, cement, sand water etc., required for these works. The road suface should be compacted well and brought to the original condition and the excess earth or debris should be disposed off to a distance with an initial lead of 10 Kms. etc. complete for the following diameters: for minimum length of 2m etc. complete

ITEM NO 32.02Vol613 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 Part1 or IS7098 Part1, Armouring strip thickness and resistivity as per IS3975 10 Sqmm, 2 Core, 9 GI Strips 4 x 0.8 mm

Page no 8.29 i Vol 371 - Cable Duct Across the Road Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road new construction, extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:981997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 1997 and approved drawings.Single row for one utility service