Public Works Department Tender

2.4.2 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

19.59 - Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge to the appropriate disposal area.

9.31 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

9.6.1 - Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement

13.59 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

8.51 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.

8.27 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

8.35.2 - Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

8.41 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

8.82 - Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

12.15 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )

4.6 - Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building (flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of materials labour lead, usage charges of equipments etc., complete.

7.40.1 - Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. - GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 g/m2 (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

7.28.1 - Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame. - Flat surfaces

22.4 - Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably white) on factory pressed bwp grade marine ply as per IS 710 of approved brand . complete as per direction of engineer in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) Note: For items (1) to (7) Minor fittings are included in price & Major Fittings to be paid separately. The cost is excluding cost of Labour & installation charges)

10.1.2 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 m2

10.2 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

10.4 - Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

14.10.1.1 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board - 510x1040 mm bowl depth 250 mm

22.10 - Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

13.4.2 - Providing and fixing brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

19.38.1 - Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Up to 10 mm thick

4751 - Finishing walls with textured interior paint of approved brand of required shade including priming coat of to give an even shade after thoroughly brooming the surface to all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper 9 smooth, The rate including cost and conveyance of all materials labour for all items of work HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., Complete as per specification and Directions of the Engineer in-charge of the work

1945 - Cleaing of glazed tiles using floors and surfaces cleaners non corrossive with chemicals Hydrochloric acid, butyl oley tamine and other which are soluble and capable of removing hard and soft stains and directions as per Engineer in charge of work

559 - Roller Blinds - Providing and fixing roller blinds for windows and ventilators including providing necessary coated channel roler arrangement roller blinds etc., complete

7154 - Supplying and fixing Conference table of size 4800x1200x750mm using 19mm block board frame at top and bottom support and 4mm veneer with edge bonded end table complete as per specification work includes cost of all materials, labour charges, all lead and lift, loading and unloading, transportation charges, and all other incidental charges completeas per the directions of engineer in charge of the work

559 - Providing and supplying Contemporary style pinnacle executive high back chair black colour mesh & fabrics, helght adjustment with chrome steel base along with twin castor wheel gas lift made up of MDI, with 3 way adjustable arm rest along with headrest having forward, backward & height adjustment etc complete, of approved featherlite/Godrej/Equivalent make Including cost of all materials, cost of labour, equipment and machineries, lead and lift, loading and unloading, transportation and all types of statuary taxes and all other incidental charges etc., complete

1.1 - Providing & fixing set of slide 380mm long full extension CED coated both side lancing for kitchen cabinet of approved make. The cost inclusive of materials, cost of labour, loading and unloading, transportation and all types of statutory taxes and incidental charges etc., complete

6261 - Repairs and reupholstery of "Three Seater" Sofa set using, Helical spring, 100 mm thick 40 density, and 75mm thick 40 density Rstolex brand, U Foam for seat, back rest and handles , the foam is covered with good quality Kora Clothe, the Kora clothe covered with approved of colour & quality fabric k of rate not less than Rs.1500/Mtr the entire sofa is stiched neatly using good quality threads, Nawar patty, synthetic resin, nails, screws, etc., The work includes cost of all materials, labour charges, machinery charges with lead all lead and lift, loading and unloading, transportion and all other incidental charges for successful completion of the work as directed by the Engineer in charge of the work

6261 - Repairs and reupholestery of "Two Seater" Sofa set using, Helical spring, 100mm thick 40 density, and 75mm thick 40 density Restolex brand, U Foamer seat, back rest and handles, the foam is covered with good quality Kora clothe, the Kora clothe covered with approved of colour & quality fabric kof rate not less than Rs.1500/Mtr the entire sofa is stiched neatly using good quality threads, Nawar patty, synthetic resin, nails, screws, etc., the work includes cost of all materials, labour charges, machinery charges with all lead and lift, loading and unloading, transportation and all other incidental charges for successful completion of the work as directed by the Engineer-in-charge of the work

66261 - Repairs and reupholstrery of "Single Seater" Sofa set using, Helical spring, 100m thick 40 density, and 75mm thick 40 density Restolex brand, U Foamfer seat, back rest and handles, the foam is covered with good quality Kora clothe, the Kora clothe covered with approved of colour & quality fabric kof rate not less than Rs. 1500/Mtrs the entire sofa is stiched neatly using good quality threads, Nawar patty, sythetic resin, nails, screws, etc., the work includes cost of all materials, labour charges, machinery charges with all lead and lift, loading and unloading, transportation and all other incidental charges for successful completion of the work as directed by the Engineer in charge of the work

7904 - Providing and fixing wall paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled with 50mm thick 32kg density glass wool and top covered out of 1.5mm thick laminated sheet of approved quality fixed over 19mm thick ply of approved brand termite and water resistance etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment complete as per specification and directions of Engineer-in-charge of the work

530 - Providing Door and Window Curtain Dry washing including cost of all materials labour charges machinery charges with all lead and lift loading and unloading transportation and all other incidental charges

533 - Providing and supplying good quality Sofa shampoo cleaning including cost of all materials labour charges machinery charges with all lead and lift loading and unloading transportation and all other incidental charges

4751 - Providing and Laying "KAJARIA" brand or equivalent first quality premium colour dual charged vitrified tiles of size 1000X200X10mm fixed over existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spears at required interval and removing stains etc., The rate including cost and conveyance of all materials labour for all items of work HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., Complete as per specification and Directions of the Engineer in-charge of the work

20.20.1.1 - Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws