Public Works Department Tender

PWD SR 2023-24 Volume - 3 P.No 146 I. No: 16.15b - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6. ( PWD SR 2023-24/ Volume - 3/ P.No 146/I. No: 16.15 b)

PWD SR 2023-24 Volume - 1 P.No 16 I. No: 2.4.2 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( PWD SR 2023-24/ Volume - 1/ P.No 16/ I. No: 2.4.2)

PWD SR 2023-24 Volume - 1 P.No 111 SI. No: 3 - Additionalities for Formwork ( PWD SR 2023-24/ Volume - 1/ P.No 111/ SI. No: 3)

I No 2.11h p-18 vol 1 of PWD S R of 2023-24 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification-All other type of structures (I No 2.11h p-18 vol 1 of PWD S R of 2023-24)

PWD SR 2023-24 Volume - 3 P.No 17 I. No: 3.6 - Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ( PWD SR 2023-24/ Volume - 3/ P.No 17/ I. No: 3.6)

PWD SR 2023-24 Volume - 3 P.No 26 I. No: 4.17 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying inuniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Wet Mix Macadam (Plant mix method)( PWD SR 2023-24/ Volume - 3/ P.No 26/ I. No: 4.17)

PWD SR 2023-24 Volume - 3 P.No 149 I. No: 16.28 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. ( PWD SR 2023-24/ Volume - 3/ P.No 149/ I. No: 16.28)

PWD SR 2023-24 Volume-2. P No:45, I No:8.28 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( PWD SR 2023-24/ Volume-2. P No:45, I No:8.28)