Public Works Department Tender

2.2.1 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

2.11.h - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

1.9 - Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.No-11 ,I.No-4.2.9 (KPWD ELE SR 2023-24) - Fabricating,supplying and erection of. ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements,including suitable boards, Bakelite sheet and MCBs as Per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom.mm, top. mm With 3mm thick, suitable base plate and 4Nos of.long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153etc., (excluding foundation) as per drawing appended 9 m - Top 70 mm and Bottom 155 mm dia [P.No-11 ,I.No-4.2.9] (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.No-46,I.No-11.9.6 (KPWD ELE SR 2023-24 - Supplying of LED floodlight luminaire with pressure die cast aluminum housing Body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life burning Hrs 50000hr@ Lumen maintenance of 70% CCT-5500K, IP 66 optical and electrical compartment & impact resistances of complete luminaire - 1K08. Power Factor - 0.9 with mains surge Protection.Compatiable for plole mouting with outer dia of 40mm to 50mm. universal voltage driver to operate wide voltage range from 100V to 270V 50/60Hz applications. compliance to IS 10322/IEC 60598 KN 79 and LM 80 adherence with rohs.UI approved MCPCB top acess street liight with single screw to ensure ease of maintenace at the sight site location with minimized nominal tools, LED light fixture with .W system power consumption LET efficent 130 with nominal CRI -75uminaire manufacture should have in house facility acredited by evelopment facility certified by NABL/CPRI and any govt. certified agency and design and development facility certified by ISO 9001-2008 housing with spplier word mark name shall be engraved embossing on the die cast housing body part .warrenty of 5years against any manufacturing defect working under standard electrical condition as mentioned above should be given by LED manufacture &Cree/Nichia/Lumileds/Osram make LED source. LED Floodlight 200W [P.No-46,I.No-11.9.6] (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-56,I.NO-13.2.3) (KPWD ELE SR 2023-24) - Supplying and Fixing.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. Using 40mm dia G.I.Pipe (P.NO-56,I.NO-13.2.3) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-5,I.NO-2.3.6) (KPWD ELE SR 2023-24 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 10 mm2 (P.NO-5,I.NO-2.3.6) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-20,I.NO-5.42.2) (KPWD ELE SR 2023-24) - Fabricating supplying and mounting MS box made out.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.Complete 16SWG (P.NO-20,I.NO-5.42.2) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-14 ,I.NO-5.7.3) (KPWD ELE SR 2023-24) - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A (P.NO-14 ,I.NO-5.7.3) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-16 I.NO-5.14.4) (KPWD ELE SR 2023-24) - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 50Amps (P.NO-16 I.NO-5.14.4) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-21,I.NO-5.48) (KPWD ELE SR 2023-24 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. P.NO-21,I.NO-5.48) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-19,I.NO-5.30) (KPWD ELE SR 2023-24 - Supplying ,fixing and wiring Electronic Trivector Meter(ETV) 5 to 20 Asingle phase Class-1 Accuracy with Temper Proo fEnergy Meter. P.NO-19,I.NO-5.30) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-17,I.NO-5.18.3) (KPWD ELE SR 2023-24 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (P.NO-17,I.NO-5.18.3) (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.No-54 ,I.No-12.57 (KPWD ELE SR 2023-24 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 Mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on The top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm With a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode Should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts [P.No-54 ,I.No-12.57] (KPWD ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-13 I.NO-32.05) (ESCOM ELE SR 2023-24 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (P.NO-13 I.NO-32.05) (ESCOM ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.

P.NO-14 I.NO-34.07) (ESCOM ELE SR 2023-24 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 50 Sqmm, 4 Core (P.NO-14 I.NO-34.07) (ESCOM ELE SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, loading and unloading charges etc. Complete as directed as per specification and direction of Engineer in-charge of the work.