Public Works Department Tender

PWD SR 202-24, Vol-2, Item No.20.67, Pg.No.204 - Renewing bars, stiles and rails, straight for joinery upto 50mm thick including mitres, haunching, mortices etc., and removing the old defective pieces and replacing with Matti/ Nandi wood including cost of materials, labour,complete as per specification.(PWD SR 202-24, Vol-2, Item No.20.67, Pg.No.204)

PWD SR 2023-24, Vol-2, Item No.20.88, Pg.No.206 - Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.(PWD SR 2023-24, Vol-2, Item No.20.88, Pg.No.206)

PWD SR 2023-24, Vol-2, Item No.20.50, Pg.No.203 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications.(PWD SR 2023-24, Vol-2, Item No.20.50, Pg.No.203)

PWD SR 2023-24, Vol-2, Item No.20.51, Pg.No.203 - Extra for removing white wash or colour wash by steel brushing and / or scraping, sand papering the ceiling and / or sloping roof surface smooth including repairs to scraches, cost of material, labour, complete as per specifications.(PWD SR 2023-24, Vol-2, Item No.20.51, Pg.No.203)

PWD SR 2023-24, Vol-2, Item No.20.56, Pg.No.203 - Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per specifications. (PWD SR 2023-24, Vol-2, Item No.20.56, Pg.No.203)

PWD SR 2023-24, Vol-2, Item No.8.25, Pg.No.45 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24, Vol-2, Item No.8.25, Pg.No.45)

PWD SR 2023-24, Vol-2, I.No-8.64 Pg.No.51 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge.( PWD SR 2023-24, Vol-2, I.No-8.64 Pg.No.51)

PWD SR 2023-24, Vol-2, I.No-8.72.1 Pg.No.52 - Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete including cost of Priming coat including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24, Vol-2, I.No-8.72.1 Pg.No.52)

PWD SR 2023-24, Vol-2, I.No-20.91 Pg.No.206 - External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc.,to the rearest garbage pit using suitable coconut broomstic, bombay broomstick, squezers /wipers rubber bru (PWD SR 2023-24, Vol-2, I.No-20.91 Pg.No.206)

PWD CSR 2023-24, Vol-1, Item No.19.2.2, Pg.No.187 - Demolishing cement concrete manually / by mechanical means including disposal of materials to the appropriate disposal area as per directions of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/e equivalent design mix) (PWD CSR 2023-24, Vol-1, Item No.19.2.2, Pg.No.187)

PWD CSR 2023-24, Vol-1, Item No.2.2.1, Pg.No.15 - Providing and laying in position Cement Concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevent IS codes, labour, usage charges of machinery, curing and all the other appurtenances requited to complete the work as per technical specifications. M20 Design mix Using 20mm nominal size graded crushed aggregates (PWD CSR 2023-24, Vol-1, Item No.2.2.1, Pg.No.15)

I.No. 10.1.7, Vol-5 BWSSB, P.No. - 113 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ( I.No. 10.1.7, Vol-5 BWSSB, P.No. - 113)

I.No. 10.8.8, Vol-5 BWSSB, P.No. - 116 - Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 110mm dia PVC couplers. ( I.No. 10.8.8, Vol-5 BWSSB, P.No. - 116)

I.No. 10.9.8, Vol-5 BWSSB, P.No. - 117 - Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. 110 mm dia PVC Elbows ( I.No. 10.9.8, Vol-5 BWSSB, P.No. - 117)

I.No. 10.10.8, Vol-5 BWSSB, P.No. - 117 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. 110 mm dia PVC Tee ( I.No. 10.10.8, Vol-5 BWSSB, P.No. - 117)

PWD CSR 2023-24, Vol-2, Item No.13.31.2, Pg.No.122 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC slovent cement and testing of joints complete as per direction of Engineer in charge. Internal work - Exposed on wall. 20mm Nominal dia Pipes (PWD CSR 2023-24, Vol-2, Item No.13.31.2, Pg.No.122)