Public Works Department Tender

cds.15.10 - H-Frame for mounting GOS ---- And as directed by the Engineer in charge of the work.

cds1.1 - RCC Pole - 9 Mtr Long, 145 Kg WL ---- And as directed by the Engineer in charge of the work.

cds1.3 - 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL ---- And as directed by the Engineer in charge of the work.

cds1.6 - 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) ---- And as directed by the Engineer in charge of the work.

cds1.7 - 11 kV, 45 KN Polymeric Insulator ---- And as directed by the Engineer in charge of the work.

cds1.8 - Guy Set Complete with No. 15 Strain Insulator ---- And as directed by the Engineer in charge of the work.

cds24.16 - 11 kV, 200 Amps, Single Break GOS ---- And as directed by the Engineer in charge of the work.

cds24.15 - 11 kV, Solid Core Type HG Fuse Unit ---- And as directed by the Engineer in charge of the work.

45.07 - Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm ---- And as directed by the Engineer in charge of the work.

36.01 - 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- And as directed by the Engineer in charge of the work.

21.01 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm ---- And as directed by the Engineer in charge of the work.

cds31.18.a - LT Distribution Box for 250 kVA with MCCB ---- And as directed by the Engineer in charge of the work.

15.01 - Transformer Oil as per IS-335:1993 EHV Grade Transformer Oil - New ---- And as directed by the Engineer in charge of the work.

16.05 - Transformer Repairs Scope: Repairs and Reconditioning of 11KV class single coil/multi coil Conventional (Aluminium wound) and 3/4/5 Star Rated failed Distribution Transformers of various Capacities and Conversion of CSP to Conventional bolt & nut type on lumpsum percentage (%) basis (Material, Labour & Salvage) at Transformer repair center 500 kVA, Aluminium Wdg, Conventional ---- And as directed by the Engineer in charge of the work.

45.01 - 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Type Transition Jointing Kit for XLPE Cable 3x95 Sqmm ---- And as directed by the Engineer in charge of the work.

57.01 - Instrument Transformer (PT & CT) as per IS-2705 Part-1&2 11KV CT (Secondary - 1A) for 3 Phase 4 Wire Metering, Burden: 2.5 VA, 0.2 Accuracy Class Ratio: 1.25/1A to 2.5/1A ---- And as directed by the Engineer in charge of the work.

11.7.2 - Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr Lumen Maintenance of 70, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiencygreter than1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Post Top Lantern with 25/30 W ---- And as directed by the Engineer in charge of the work.

11.8.5 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 120 W ---- And as directed by the Engineer in charge of the work.

cds-10.5 - LT 2 Pin Cross Arm with clamps, bolts, nuts for RCC Pole - 9 Mtr Long, 145 Kg WL ---- And as directed by the Engineer in charge of the work.

13.1.1 - Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.Using 25mm dia G.I.Pipe ---- And as directed by the Engineer in charge of the work.

13.5 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- And as directed by the Engineer in charge of the work.