Public Works Department Tender

STEEL RACKS sanket steel 900 mm wide 1875 mm high Metal Shelving Racks Product id: 5116877-94973861652 GENERIC Type OPEN TYPE Pigeon Holes without Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted) 5 MATERIAL Shelves Material 1.0 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513 M S Sheet Thickness of Shelves and Back (Minimum) in mm NA Sides, Back and Partition Wall Thickness (Minimum) (mm) NA Angle Posts Material and size Made from Steel Sheet of 3 mm thickness 40 X 40 mm DIMENSION Depth in mm (�5 mm) 400 Width in mm (�5 mm) 900 Height in mm (�5 mm) 1875 Bin Strip Height in mm (�1 mm) Not Provided CERTIFICATION Conformity to Indian Standard IS: 1883 Latest Test reports to be furnished to buyer on demand ---- including cost of all materials, labour, HOM, I & UL, Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

ROSE DESIGNER CHAIRS OFFICE / VISITOR CHAIRS with Seat D X W X H 600 mm 550 mm 430 moulded plywood Product id: 5116877-31327815407 MATERIAL Type of material (other then wood) used in Polythene cane Chair NOT APPLICABLE Material of Fabric Back Cover leatherite Thickness of Plywood used in Backrest IN MM (�1 mm) 12 mm Frame Material STAINLESS STEEL Density of Polyurethane Foam Used in Seat �2 (Kg/Cub M) 32 Kg/Cub.M Material of Fabric of Seat Cover black leatherite Density of Polyurethane Foam Used in Backrest �2(Kg/Cub M) 35 Kg/Cub.M Thickness of Plywood used in Seat �1(mm) 12 mm GSM/Thickness of Fabric �5 (Gram per Sq Meter) 80 Gram per Sq Meter Arm Material chrome mild steel Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm Shoe Type PVC GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest Yes Chair Type With Arms Type of Seat and Backrest moulded plywood Frame Type 4 Legs Castors Without DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe Chair Height �15(mm) 700 mm Seat Depth �10(mm) 600 mm Seat Width �10 (mm) 550 mm Seat Height IN MM �5(mm) 430 Backrest Width �10(mm) 450 mm Backrest Height �10(mm) 470 mm Arm Length �5(mm) 250 mm Arm Width �2(mm) 40 mm COLOUR & FINISH Colour of Fabric for Seat and Backrest black Paint Type chrome Colour of Paint NA CERTIFICATION Polythene cane conforming to Type-1 of IS 5378 /1994 NA Test reports to be furnished to buyer on demand NO BIFMA certification YES OEM of offered product is ISO 9001:2015 certified YES OEM of offered product is ISO 14001:2015 certified YES OEM of offered product is ISO 18001:2007 certified YES ---- including cost of all materials, labour, HOM, I & UL, Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Laboratory Steel Furniture Island bench with table top Product id: 5116877-62045431185 GENERIC Type of Lab furniture Island bench with table top Type of Frame for installation of bench C type frame Type of laboratories furniture and allied accessories Modular Cabinet design Facilitating future equipment retrofits and full reconfigurations without requiring any major modification to the structure Table back bottom skirting N.A Rear panel Fixed Provision of Electrical raceway YesProvision of Electrical points Yes Provision of modular type reagent rack Door type (two doors) Provision of Electrical service panels Door type (two doors) Provision of Gas service panels Door type (two doors) Provision of Verticals Single Verticals (single) 1 number Verticals (double) N.A Mini Vertical Service channel connector N.A Provision of blower (to remove airborne contaminants) No Provision of ducting (for purpose of ventilation) No Scope of supply (offer price to include all cost components) Furnishing/Installation all the laboratories furnitures and allied accessories along with the supporting structures Transportation /freight charges Offer prices are on free delivery at consignee site Approval of laboratory layout plan After award of contract, seller shall have to get submitted layout plan within 10 days to get approved from buyer. Buyer shall convey his approval or otherwise within 10 days after submission of layout plan. If there is delay in approval of plan from buyer side, the D.P shall be regularized for the period of delay in plan approval MATERIALType of Frame C type Frame - One piece Deep Drawn moulded in EDD CRCA Ç’ frame work with 50 mm width x 50 mm height and epoxy powder coated with self adjusting levellers (No tubular construction) – 2 numbers per table Each moulded C frame leg have a load carrying capacity 600 Kgs. Material of Frame Galvanized (Zinc coated) GI steel sheet double skin pass Thickness of Frame 1.1 mm Cabinets body (casing) material GI steel sheets Thickness of Cabinet frame cover panel 1.1 mm Base Cabinets UDL (uniformly distributed load) 300 Kgs Drawers support brackets shelves slides thickness 1.1 mm Side cover panels material 1.2 mm Side cover panels thickness 1.1 mm Handles thickness 1.1 mm Sandwich type metal shutters (within filled sound deadening material) made up of GI steel sheets epoxy powder coated Sandwich type metal shutters thickness 1.2 mm Shelves and Drawers load carrying capacity 40 Kgs Overall load carrying capacity of Cabinet 80 Kg (40 Kgs. On each shelf and 40 Kgs. On bottom) Rear panel material GI steel sheets epoxy powder coated Rear panel material thickness 1.1 mm Vertical construction (for reagent racks N.A Verticals provided with N.A Each Verticals with Nylon levellers bolts (for levelling) N.A All Verticals with top caps in plastic N.A Reagent shelves bracket made up of N.A Glass for framed sliding and swinging doors 4 mm thick float glass Glass for reagent shelf’s 6 mm thick wire glass Drawers and Doors pulls Made up of aluminium presser die cast (PDC) handles Minimum length of handle 320 mm epoxy powder coated Hinges Made up of SS 304 5 digit knuckle butt hinges (at least 95 degree opening) compliant to SEFA 8M standard Minimum thickness of hinges raw material 2 mm Number of hinges for shutters / doors under 36 inches in height N.A Number of hinges for shutters / doors over 36 inches in height N.A Locks N.A “O” ring over the lock barrel N.A Shelf supports Power coated shelf support clips Drawer slides Heavy duty type telescopic ball bearing slides and CED coated in black colour Legs made up of N.A Leg size 50 mm x 50 mm Service pipe supports L type supports duly perforated Service pipe supports made up of 32 mm x 2 mm thick GI flats slotted at a particular pitch epoxy coated Work tops Acid resistant granite 18 mm thick Colour of work top As per Buyer’s choice Granites edges N.A Worktop placed on 4 mm thick neoprene rubber stop back (placed in between table tops and table frames work Electrical points Provided with one number of 3 Module Plate having 5/15Amps combined switch and 2 sets of sockets Modular type reagent rack One number rack with 2 Shelf of grade Aluminium and 6 mm thick compact laminate (to fit the table) DIMENSION Size of side benches/Island benches (LxWxH) 1500 mm X 1500 mm X 900 mm C Type Fixed Under Bench Cabinet size 500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) C Type Sliding Under Bench Cabinet size 500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) Electrical raceway size 150 mm(H) x 150 mm(W) x 1800 mm Electrical service panels slideable size 200 mm (H) x 150 mm(W) x 1800 mm Size of Verticals 150 mm x 25 mm thick x 1200 mm (H) SIDE SINK ACCESSORIES Sink made up of Polypropylene (PP) Sink Size 560 mm(L) x 460 mm(W) x 250 mm(D) Number of Sink 2 number Water fitting 1 number (Three way) Splash guard N. APeg board N.A Eye Wash fountain (table mounted) One number (2-way) Storage unit One set Dummy storage unit with two doors ---- including cost of all materials, labour, HOM, I & UL, Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.