Public Works Department Tender

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Short point upto 3Mtr from tapping point to out let via switch ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 - 1.5 sqmm ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 - 2.5 sqmm ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. - 10"x7"x3" (254x178x76mm) ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. - 8"x6"x3" (203x152x76mm) ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - Stepped Fan Regulator. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. - 6 Amps lamp holder ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. - LED light fitting 1 x 4'- 20/22 w ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per watt, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 12W, 6500K ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 1- Single Door II -Double Door Ill -Double Door - 4Way SP &N ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. - 48" Sweep (1200mm) Regular model ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. - On wall/ ceiling / Rafter / Girders ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work