Public Works Department Tender

Centering Charges vide qty as per I.NO 3 / 35% P.No 115 S2 Vol 1 ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Supplying ftting & placing TMT bar reinforcement to superstructure complete as per Specifcations ( vol -1 P No.103 I .No.14.1) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Surface Drains in SoilConstruction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. ( vol -3 P No.132 I .No.20.8-B) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work (Vol - 1, Pno 34 /1.16.3 SR 2021-22) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

WBM Grading 2 Crushable Screening. Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Vol - 3, Pno 133/ I No 20.12 SR 2021-22) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specifcation includingpremixing the Material with water at OMC in mechanical mixplant carriage of mixed Material by tipper to site, laying in( vol -3P No.24 .No.4.27) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over aprepared sub base, with 43 grade cement or any othertype as per Clause 1501.2.2 M30 (Grade), coarse andfne aggregates conforming to IS:383, maximum sizeof coarse aggregate not exceeding 25 mm, mixed in aconcrete mixer of not less than 0.2 cum capacity andappropriate weigh batcher using approved mix design,laid in approved fxed side formwork (steel channel,laying and fxing of 125 micron thick polythene flm,wedges, steel plates including levelling the formwork asper drawing), spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators andfnished in continuous operation including tructionjoints, , primer, sealant , curing of concrete slabs for 14- fnishing to lines and grade as per drawingand technical specifcation clause 1501 with all lead, lifts,loading & unloading charges, cost and conveyance of allmaterials, labour, equipments etc., complete. as per thedirections of the Engineer-in-charge of the work.( vol -3 P No.138 I .No.20.29) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Direction and Place Identification Signs with size more than 0.9 m2 size Board.Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (P 177/24.4.1) ---- Item including cost and conveyance of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc.. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.