Public Works Department Tender

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs. Specification No. KBS 4.6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-6.7 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 6-4.3 : Providing and constructing burnt brick masonry with approved quality of modular bricks ground moulded of standard size of class designation 3.5Newton per sqmm with cement mortar 1:6 for basement and superstructure with cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 6-7.1 : Construction of partition wall 11.2 cms thick with non modular ground moulded burnt bricks of class designation 3.5 Newton per sqmm with cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

Providing and fixing Stainless steel staircase raling as per Chief Architect Drawing No. 11520/ HRSC with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals, and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of machineries and electrical charges, etc., complete as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 9.4-3 : Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

Providing and fixing factory made splendoor of solid core single leaf rigid composite polymer laminated sal wood, door shutter of required thickness, manufactured out of solid core door conforming to IS 2202 (Part-1) 1991, laminated with 0.8 mm thick polymer, termite, water resistant and fire retardant with superior gluing based on vacuum lamination technology and with various pre moulded design on both faces conforming to IS 6307-1985, using adhesive conforming to IS 4835-1979 and door shuters tested in conformation to IS 4020-1994. The finish of shutters will be TEADK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot. with door shutter 35mm thick ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 1Omm thick fixed on existing flooring with special adhesive for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, cost of materials, mortar, labour etc., complete as per specification. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

Providing and laying flooring for corridors/lobbies using combination of pre polished 19 mm thick water cut/gang saw Grey Granite, Black Granite, and strips of 50mm wide pre flamed grey granite using pre polished grey granite 19mm thick 76%, Pre polished black granite 19mm thick @ 2% and preflamed 19mm thick grey granite @22% over existing cement concrete bed in CM 1:4 average 20mm thick pointed with white cement/colour pigment etc., complete. - using 19mm thick granite width not less than 1200mm ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB15-3.3 : Providing 12mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB15-3.9 :Providing 18mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 15.8.2 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 15-15.2 : Extra over Item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 15-16.1 : Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. - with primer ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood based surface after preparing the surface after throughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting liquid wood filler, for varnish including cost of materials, labour, complete as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Area to be considered - (a) 100% for fresh surface (b) Upto 10% for repainting ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

uPvC Windows and Doors - Providing & fixing of glazed Openable Window made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanixed iron profiles throuhout the window. The outer frame having a overall size of 60x55 mm with reinforcement of 1 mm thickness, mullion with overall size of 74x60 mm with reinforcement of 1 mm and sash with overall size of 75x60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34x20 mm and coextruded with gasket. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system of flush lock, Wall thickness of frame, mullion & sash shall be 2-2.2 mm. ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 6394.00 Basic rate + 208.00 ACC 320 * 0.65 = 6602.00+660.20 AW 10% = 7262.20 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500 (Issue rate 52126.00 - SR rate 44915.25=Diff in cost 7210.75 muntipat 1.05*1.2= 9085.54 + Basic rate 68116.00=77201.54 +AW10%7720.15 = 84921.70 ---- ___ etc complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work.