Public Works Department Tender

4.1 - Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.1.3 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.2.3 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.4.3 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.4.3 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

1.9 - Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

1.11 - Manual Means - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.11 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

6.8 - Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

6.15 - Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

2.4.1 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.2.1 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.8 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.12 - Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.80 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.16.2 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.16a - Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

9.17.2 - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

9.37 - Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

9.11 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

9.39 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

9.36 - Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

9.24 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

10.2 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.13.1 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.51 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.57.6 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side commercial ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.93.1 - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed sS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/sS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.94.1 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.88 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of Glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float Glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size – 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.85 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head Glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

11.34B - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.51 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.33.1 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.32 - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.33.2 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.33.3 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

11.28 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.74.1 - Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.74.3 - Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

12.60 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

22.15.7 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

22.15.5 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 150x10mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

22.15.4 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

22.15.3 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

22.9a - Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

22.15.10 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

7.32.3 - Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.