Public Works Department Tender

KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 2.14-1: Extra for additional lift of 1.5m. or part thereof for excavation In loose / soft or hard soil including cost of materials, labour complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB-3.2: Providing and injecting chemical emulsion for Pre- constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. (Plinth area of the building at ground floor only shall be measured ) Specification No. KBS : 3.2.6 / 3.2.7 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-1.2 : Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4.2.1 : Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 5.1-3 : Providing and constructing granite / trap / basalt rubble stone masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.KBS 5.1.12 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications. specification. No. KBS 2.9 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 2.5 : Earthwork excavation in all soil deposits and filling sides of foundation upto plinth in layers not exceeding 20cms. in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labour complete as per specifications. specification. No. KBS 2.9.9 / 2.9.10.1 / 2.1.1 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4.2.7 : Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregtes @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, ,pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.7 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 6-1.3 : Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm with cement mortar1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 6-7.3 : Construction of partition wall 11.2 cms thick with non-modular ground moulded burnt bricks of class designation 3.5 Newton per sqmm with cement mortar 1:4 including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4-6.11 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete as per specificaiton. Specification No. KBS 4.6.2 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 9.4-5 : Providing RED Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 9-6.2 : Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per specification. - 35mm thick one side teak and one side commercial ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

uPvC Windows and Doors - Providing & fixing of glazed 3 Track - 2 Panel Sliding Door With Mesh … made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the window. The sliding outer frame having a overall size of 108x45 mm with reinforcement of 1 mm thickness, super sash with overall size of 39x75 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of GI.Glazing bead for fixing of glas shall be of size 20x18mm and coextruded with gasket. Fiber Glass mesh shall be provided in mesh shutter. Window/Door shall be provided with 6 mm plain float glass, standard hardware & multi point locking system of Patio espagnolette. Wall thickness of frame, mullion & sash shall be 2-2.2 mm. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

uPvC Windows and Doors - Providing & of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPv gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the windown. The outer frame having a overall size of 60x55mm with reinforcement of 1 mm thickness and Mullion with overall size of 74x60mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, Wall thickness of frame Mullion shall be 2-2.2 mm. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Supply and fixing of door frame made of hollow extruded PVC Section (Nandi or Equivalent) having dimension of 40x57mm with the wall thickness of 2mm+/-0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2corners shall be metric cut/ welded. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

PVC DOOR SHUTTER (Nandi or Equivalent) Supply and fixing of door shuttersmade of rigid PVC extruded hollow section (Nandi or equivalent) o f 20mm x 200mm with the wall thickness of 1.0mm + /0.1mm equally divided into 4nos with tongue and groove locking arrangements. The shutter frame is made of 58x24 mm with the wall thickness of 1.5mm+/ -0.15mm section metricut and joined at 4 corners with 125mmx225mm plastic brackets. The shutter shall be horizontally reinforced with 2nos of 8mm PVC rods. Teak wood battons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed on to the door shutter. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and fixing Stainless steel staircase raling as per Chief Architect Drawing No. 11520/ HRSC with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals, and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of machineries and electrical charges, etc., complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15.8.1 Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB15-3.4 : Providing 15mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB15-3-13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Area to be considered - (a) 100% for fresh surface (b) Upto 10% for repainting ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and laying flooring using prepolished, water cut/gang saw 19mm thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials and labours etc., complete as per specifications. - using silver grey granite / Multy Red / Ruby Red / Black / HassanGreen Granite of width not less than 900mm ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc , Complete as per specification. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications. - for Ceramic Tiles of size 30x30cms 6mm thick ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 14-17.1 : Providing skirting, dado, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-15.2 : Extra over Item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-16.1 : Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. - with primer ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-18.1 : Applying red lead ready mix priming coat over new steel or other metal surface including preparing the surface after throughly cleaning oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine steel wool, sand papers including cost of materials, labour, complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood based surface after preparing the surface after throughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting liquid wood filler, for varnish including cost of materials, labour, complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

KSRB 8.6-5 : Providing and fixing on wall surface 2.5 kg / sq.cm H.D.P.E. rain down water pipes 90 mm outer dia approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing complete as per specifications. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24 x 38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross 'T' of size 24 x 28 mm made out of 0.33 mm (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross 'T' of length 600 mm and size 24 x 28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200 x 600 mm panel to from grid of size 600 x 600 mm, resting on periphery walls I partitions on a Perimeter wall angle pre-coated steel of size (24 x 24 x 3000 mm made of 040 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screwes at 230 mm intervals and laying 15 mm thick densifed edges calcium silicate ceiling tiles of approved texture in the grid, including cutting I making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.l. slotted cleats of size 25 x 35 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G. I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.80mm spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint for all heights, as per specifications, drawings and as directed by Engineer-in-charge. ---- Including cost of all materials. Labour, HOM, Loading & Unloading , Curing with all leads and lifts etc., complete as per specifications & as directed by Engineer-in-charge of the work.