Public Works Department Tender

5.31 - Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. Ref to MoRT&H : IRC - IRC-37:2018 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

3.6 - Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.6.A.ii - Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. - 90 cm equilateral triangle. Ref to MoRT&H : IRC - 801 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.8 - Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. Ref to MoRT&H : IRC - 801 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.16.ii - Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer stone (precast). Ref to MoRT&H : IRC - 805 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.16.iii - Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). Ref to MoRT&H : IRC - 805 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

8.59.1 - Safety / Crash Barriers - Providing and erecting W Beam crash Barrier system (MASH TL3/EN1317 H1 complaint) installed by Pile Driving Machine as per MoRTH Circular RW/NH-29023/02/2019-S&R(P&B) dated 01.01.2020. The same should be hot Dip Galvanized as per Indian standard with 550 g/m2 coating on beams and post and all fittings to conform according to IS 1367 and IS 1364. Ref to MoRT&H : IRC - IRC 119 : 2015 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.