Public Works Department Tender

3.9 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

2.3.5 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:20106 mm2 ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

2.3.6 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 10 mm2 ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

2.3.7 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 16 mm2 ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.18.1 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.18.8 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40A TPN ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.40.1 - Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete100 A 4 x 30 x 6 mm Aluminium Strips ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

Data Rate - Decorative Median light poles: Fabricating, supplying and erection of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m sec for Mtrs pole in double/single section and single joint welded as per IS 9595/IS 10178AWS having two nos of 11-12 mtr length pole with dimensions bottom 190mm, top 60 mm with 3mm thick, The pole should be painted ashtetically using good quality Dupont paint.The centre pole having dimension of 140 mm dia 2.8 mtr length 2.4mm thick with perforation for the length of 1000mm inserted with colour changing LED tube inside. Should be painted with good quality Dupont paint and stainless steel ball should be placed on top. Suitable base plate and 6 Nos of m-24 long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., The pole height may be varied at bridge section. The pole should be as shown in attached picture Rate Approved ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

11.8.6 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08 Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection Compatible for pole mounting with outer dia of 40mm to 50mm Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60Hz application Compliance to IS 10322 IEC 60598 LM 79 & LM 80 Adherence with RoHS UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools LED Light fixturewith W System Power consumption LED Efficiency1301m/w nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 150 W ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

13.1.1 - Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts,Using 25mm dia G.I.Pipe ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

32.05 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397516 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

32.07 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397525 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

2.5.8 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 2.5 mm2 ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.48 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.13.3 - Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 60 A ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.9.3 - Supplying and fixing HRC fuse units base on existing switch / panel board.100 to 300 A ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

5.10.1 - Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703.upto 63 A ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

21.05 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

66.00 - HDPE/PLB Pipe 50/42 mm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

12.56 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

1.4.1 - Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and such similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work In all kinds of soils Depth upto 1.5 m ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

63.01 - Brass Cable Gland 25 mm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

59.01 - Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

2.11h - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification( P 18 I.N:2.11H) PWD SR-21-22) ALL OTHER TYPES OF STRUCTUE All other type of structures ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

2.2.1 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications( P 15 I.N:2.2.1.1) Volume-1 CSR-21-22)() Pno 15 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

Volume-1 , 1.17.1 - Earth work excavation for pipeline trenches in all kinds of soils by mechanicalmeans as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading, caution lights, bracing, usingsight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in thefollowing strata. (1*1*1.2=21.60)All kinds of soils. Depth upto 1.50 m ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

Volume-5, 11.1.3 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete.Light Duty GI pipe of 25mm dia ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.

8.02 - 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM ( Volume-6 It.no 8.02 ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries etc., complete as per directions of the Engineer-in-charge of the work.