Public Works Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KPWD/2021-22/RD/WORK_INDENT141531Bid Award Id
ViewTender No
KPWD/2021-22/RD/WORK_INDENT141531Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://kpwd.karnataka.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Water Bound Macadam Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. - By Manual Means
864.39
-
2110840.38
... More
Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
1267.81
-
429787.59
... More
Excavation for Structures--Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. - Ordinary soil--Upto 3 m depth
649.3276
-
249341.8
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202. By Mechanical Means - Dismantling of Cement Concrete Pavements as per Technical Specification Clause 202.Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately
2.08
-
2175.68
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
208.2
-
1081807.2
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
5.4
-
26082
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
19.98
-
115604.28
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
1.193
-
71749.41
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
18
-
93528
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
28.485
-
137582.55
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
89.82
-
519698.52
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
5.804
-
349064.17
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
126
-
654696
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
12.375
-
59771.25
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
31.1
-
179944.6
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
1.8172
-
109290.04
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
172.725
-
897479.1
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
16.725
-
80781.75
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
75
-
389700
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
22.04
-
106453.2
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
59.9
-
346581.4
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
3.8738
-
232978.08
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
115.8
-
601696.8
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
172.05
-
893971.8
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
183
-
950868
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
184.5
-
958662
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
181.8
-
944632.8
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Removing and resetting of footpath slab (PWD SR )
321
-
63237
... More
"Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 "
219.6375
-
1141236.45
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
24
-
115920
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
152.4375
-
792065.25
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
44.175
-
213365.25
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
6.02
-
34831.72
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
0.382
-
22974.24
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
213.975
-
1111814.1
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
24.675
-
119180.25
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
4.86
-
28119.96
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
0.2444
-
14698.7
... More
Cement Concrete PavementConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
159.45
-
828502.2
... More
Providing and fixing of main Information Board of size 1500mm x 900mm fabricated using M.S sheet of 1.5 mm thick, duly welded with MS angle 50 mm X 50 mm x 4mm size on back on edges and welded to steel flat 25 mm x 5mm thick and fixing logo at top of the board as per drawings and specification. The angle iron frame M.S. sheet welded to angle of 75 x 75 x 6 mm thick duly embedded in concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm. All member will be stove enamelled on both sides Lettering and painting, border etc., will be painted with ready mixed Synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel angles will be painted with primer and two coats of epoxy paint etc., (Name board for Road work as per term/condition no. 12 (xii)
1
-
6000
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 , P.C.C grade M 10--Nominal mix 1:3:6,
3.6
-
17388
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204--For height , R.C.C grade M 20
13.2
-
76375.2
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
0.8016
-
48209.83
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements