Public Works Department Tender

Approved SE Office Data Rate Sl.No 9 - Renovation of Existing and old Cautionary Sign Board, providing and application of Retro Reflective Sheeting confirming to Type XI Standards which are overlaid on site and bonded on an existing Aluminum Sheeting supported on a mild steel angle iron post having a properly designed foundation and pedestal above the ground level, the pedestal shall be painted with two coats of Black and Yellow strips of synthetic enamel paint, where as back side of the Sign board and Frame is painted with two coats of synthetic grey enamel paint and post shall be painted with metal primer and with two coats of Black and White strips of enamel paint, complete including the cost of scrapping, cleaning, removal of rust and all materials, labour, lead and lift, etc,. complete as per specification. ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charges of machinery and equipments, transportation charges labour charges and all other incidental charges etc., complete as per standard technical detailed specification and as per approved design and drawing and directions of the Engineer in charge of the work.

Approved SE Office Data Rate, Sl.No: 18 - Providing and Application of Transverse Bar Marking on Roads to reduce the speed of the vehicle and to warn the hazard ahead in advance as per IRC: 35-2015 Clause 11.2, with hot applied thermoplastic road marking compound which meets the MORTH specification of Clause 803.4.1 which is applied by a screed technique, where the Transverse Bar shall be formed in one continuous integral process, the screed applied is not less than 6mm in thickness and the spacing between the Bars shall be maintained at a distance of 600 mm from one Bar to another, following application of the line a surface application of solid reflectorizing glass beads at 250 gms/sqm shall be applied. The minimum and maximum width of Transverse Bar Marking shall be restricted to 300mm whereas one set shall comprise of 6 No's of Transverse Bar including the cost of all materials, lead and lift, labour etc., . The finished surface shall be uniform and free from streaks and holes, complete as per the specified drawing and Engineer Incharge. ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charges of machinery and equipments, transportation charges labour charges and all other incidental charges etc., complete as per standard technical detailed specification and as per approved design and drawing and directions of the Engineer in charge of the work.

PWD SR 2023-24 Vol-3, PNo.64, INo. 8.6-801A(ii) - Retro-Reflectorised Traffic Signs: Providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminum sheeting vide clause 801.3, or on 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC:67:2022. ( 90 cm Equilateral Triangle ) ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charges of machinery and equipments, transportation charges labour charges and all other incidental charges etc., complete as per standard technical detailed specification and as per approved design and drawing and directions of the Engineer in charge of the work.