Public Works Department Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,40,000Document Cost
Refer DocumentsTender Fee
₹ 4,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
PWD/2024-25/EL/WORK_INDENT20802Tender No
PWD/2024-25/EL/WORK_INDENT20802Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Instructions to Tenderers
Instructions to Tenderers
BOQ Items
... More
61.13 of Standard Stock Material (11kV System) - P - Full Threaded Bolt & Nut as per IS-1367 GI 16x50 mm
1647
139
229262.4
... More
1.1.2 of Part III Utilization (PWD Electrical) - Open Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick.
3454
85
293762.7
... More
2.5.8, of Part III Utilization (PWD Electrical) - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 2.5 mm2
6588
118
781666.2
... More
13.6 of Part III Utilization (PWD Electrical) - Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires.
549
207
114137.1
... More
5.38 of Part III Utilization (PWD Electrical) - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.(48/6.36)
99
540
53534.25
... More
5.40.1 of Part III Utilization (PWD Electrical) - Supplying . amps rated 3 phase with neutral bus bar using required capacity electrolytic allumimium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40X6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. -100 A 4 x 30 x 6 mm Aluminium Strips
33
2588
85412.25
... More
5.42.1 of Part III Utilization (PWD Electrical) - Fabricating supplying and mounting MSbox madeout. SWG suitable forfloor/wallmounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14SWG
706200
-
374286
... More
3.9 of Part III Utilization (PWD Electrical) - Supplying and Fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc, and fixing on existing wood or metal box using N.F screws.
125700
-
46509
... More
5.41.2 of Part III Utilization (PWD Electrical) - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm
264
414
109494
... More
5.7.4 of Part III Utilization (PWD Electrical) - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32A
99
725
71829.45
... More
5.13.3 of Part III Utilization (PWD Electrical) - Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 A
33
6247
206167.5
... More
5.47 of Part III Utilization (PWD Electrical) - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.
65
2430
157998.75
... More
5.20.10 of Part III Utilization (PWD Electrical) - Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole
33
5822
192134.25
... More
12.57 of Part III Utilization (PWD Electrical) - Supplying fixing and wiring earth electrode for grounding of lifts,transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should been closed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom o the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts.
33
4468
147470.4
... More
12.58.3 of Part III Utilization (PWD Electrical) - GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip
330
134
44352
... More
32.05, of Standard Stock Material (11kV System) - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975, 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) FOR POLE
1.65
148934
245741.1
... More
21.05, of Standard Stock Material (11kV System) - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as
directed by the departmental staff. 2.5 to 25 Sqmm
1.65
21930
36184.995
... More
35.01, of Standard Stock Material (11kV System) - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable, Up to 4C x 50 Sqmm
33
340
11226.6
... More
8.02, of Standard Stock Material (11kV System) - Guy Wire & GI Wire as per IS-2141, 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM.For earth pits
432.3
78
34060.917
... More
60.02, of Standard Stock Material (11kV System) - Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 16 Sqmm
264
2
554.4
... More
19.3, of Major Work Materials Equipments (Part I - Caution/Danger Board
33
333
11018.7
... More
5.15, of Labour Charges VOL-6 PG NO-45 OF 81 - Fixing Danger Board
33
84
2772
... More
5.18.4 of Part III Utilization (PWD Electrical) - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps DP
32
775
24830.4
... More
5.13.1 of Part III Utilization (PWD Electrical) - Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25A
32
1354
43344
... More
2.5.2 of Part III Utilization (PWD Electrical) - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 1.5 mm2
192
75
14515.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements