Public Works Department Tender

code04 - SITC of high quality long through multi color Linear wash light, Protection Rating : IP66, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012and having CE certification against standard Low Voltage Directive & Protective Equipment - EN 60598-1:2015, and Electromagnetic Compatibility Directive - EN 61547: 2009, Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 50W, CCT : RGBW(6000-7000K), (as per the design approval), Optics : PMMA with holder, Beam Angle : 25 degree /45 degree /60 degree , Control : DmX512 Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant AC 110-230V, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0 degree C to 50 degree C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP67 connector having the length greater than 300mm. ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code05 - SITC of high quality long through multi color Linear wash light, Protection Rating : IP66, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012and having CE certification against standard Low Voltage Directive & Protective Equipment - EN 60598-1:2015, and Electromagnetic Compatibility Directive - EN 61547: 2009, Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 40W, CCT : RGBW(6000-7000K), (as per the design approval), Optics : PMMA with holder, Beam Angle : 25 degree /45 degree /60 degree , Control : DmX512 Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant AC 110-230V, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0 degree C to 50 degree C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP67 connector having the length greater than 300mm. ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code06 - SITC of PVC insulated multi core electrical un armoured flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site condition) ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code07 - SITC of PVC insulated multi core electrical un armoured flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site condition) ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code08 - SITC of 5 core DMX cable comprises twisted pairs with shield support for carrying ofdata. DMX512 cable is used for connecting all light consoles thatuse DMX 512 standard data transmission. As per Quotation rateapproved by superintendent engineer, Rate NotificationDt.10.8.2022 ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code09 - SITC of PVC insulated multi core electrical armored flexible 4C x 4Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands aluminium conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site condition) ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code10 - SITC of IP65 5 pin XLR Male and Female connectors having 5 pole cable connector,Male/Female connector with improved latch, cage type contacts,solder stopfor easy soldering, and additional ground contact forbest contact integrity between chassis and cable connector. Moredurable housing for maximum reliability. As per Quotation rateapproved by superintendent engineer, Rate NotificationDt.10.8.2022 ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code11 - SITC of sub Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits.- 12 Nos of 6/10A SP Outgoing MCB's. - 1No of 32A TPN Incoming MCB. ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code12 - SITC of IP driver box made up of UPVC/PVC fabricated housing and ivory connectors for the internal terminations and external outgoing connecting points.(For diver box) ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code13 - SITC of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputsfrom a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Productfeatures: Group 1 & group 8 DMX signal change. As per Quotationrate approved by superintendent engineer, Rate NotificationDt.10.8.2022 ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code14 - SITC of DMX signal amplifier , Power Consumption: 2W, Input Power: 120 240 V ACInput Built in Power Supply, Indicator Lights for DMX In,Out andPower, 1000v DMX Isolation, 20 60C Temp Rating, 3 Pin XLR andRJ45 In/Out Ports DMX IN-(3 Pin XLR), DMX OUT-(3 Pin XLR), DMXIN (RJ 45), DMX OUT-(RJ 45) As per Quotation rate approved bysuperintendent engineer, Rate Notification Dt.10.8.2022 ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code15 - SITC of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, DMX audio players and fountains. The controller comes with a variety of features, iPhone/iPad/Android remote control, WiFi facilities, dry contact port triggering and flash memory. USB connection 2048 DmX channels universe in live mode (computer) 8 dry contact trigger ports via HE10 connector stand alone mode with 5 area and 90+ scenes, Mac OSx 10.6/10.7/10.8 - Windows XP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, 1 HE10, Power From 5V to 5.5V DC (AC/DC adapter in option. ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.

code16 - SITC of Programmes pertaining to permanent decoarative illumination. ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful completion of work etc., complete as per standard specification of work and as directed by the Engineer in charge of the work.