Public Works Department Tender

item code 16.29 - i) Providing and fixing of typical SHDP informatory sign board with Logo as per MORD specifications and drawing.The board will be a composite unit consisting of three plates of Aluminium Composite Materials ACM, material specifications as per Clause 1701.3.7. The top most plate will be in Rectangle shape of 600mm x 600 mm size, riveted over welded M.S. angle iron frame of 25 mm x 25mm x 5 mm size on back on edges. The middle plate will be 1200 mm x 150 mm size riveted over welded M.S. angle iron frame of 25mm x 25mmx 5 mm size on back on edges. The main lower most plate will be 1500 mm x 600 mm size, riveted over welded M.S. angle iron frame of 25 mm x 25 mm x 5 mm size. Welding of all the sheets over angle iron frame will be done neatly to have plain surface on one side. The angle iron frames of the lower most plate and the middle plate will be welded to two nos. 75 mm x 75 mm 12 SWG sheet tubes posts placed at 1125 mm apart centre to centre. The top of the middle plate will be flushed with the top of 75 mm dia medium steel tube posts and these posts will be embedded in cement concrete M15 grade blocks of 450 mm x 450 mm x 600 mm below ground level. The height of bottom of the lower most plate will be 1200 mm from normal ground level and the bottom of middle plate will be 100 mm above the top level of the lower most plate. The SHDP rectangular shaped plate mounted over angle iron frame will be connected to middle plate by square medium steel section of 47 mm x 47 mm thickness 12 SWG having a spacing of 100 mm between the Rectangular shaped plate and middle plate and this square section will be welded to the bottom point of the Rectangular shaped plate. ii The lettering and borders, etc. of middle and bottom plate, SHDP logo on top plate shall be as per clause 1701.4.6 essages/Borders. All the sections of frame and posts will be painted with primer and two coats of Epoxy paint. The steel tube below ground level will be painted with three coats of Epoxy paint. The design, painting and lettering shall be done as per approved drawing. iii For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. iv A reference number along with the month and year of installation should be placed on the back of a sign in a contrasting colour per by stamping in characters not exceeding 50 mm in height.485777/2019/DirTech 7 Retro Reflective Traffic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type 1 Schedule of Rates PWD 202324 vol 3, Item No 16.29 , Page No 149 ---- Including cost and conveyance of all materials labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc complete as directed as per the specification

Item Code 2.5 - Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used per auctioned, including removal and disposal of top perganic soil not exceeding 150 mm in thickness. Schedule of Rates PWD 202324 vol 3, Item No 2.5 ii a , Page No 9 ---- Including cost and conveyance of all materials labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc complete as directed as per the specification

item code 1.14.1 - Earth work excavation for Foundation by mechanical meansfor allworksand depth upto 3 m as per drawing and technicalspecifications including setting outshoring strutting barricading caution lightsincluding dressing of excavated surfaces disposing off or levelling the excavated earth or sorting andstacking the selectedearth for reuse in a radius of50 m and lift upto 1.5 m including cost of labour tools usage of machinery and other appurtenaces required to complete the work. etc. inclusive of all lift and leads and all complete as per the direction of Engineer in charge. do all kinds of Soil by Mechanical Means. Schedule of Rates PWD 2023 24 vol 1 Item No 1.14.1 Page No 8 ---- Including cost and conveyance of all materials labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc complete as directed as per the specification