Public Works Department Tender

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mechanical means ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Reinforced cement concrete M15 grade kilometer stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc ii. Ordinary kilometer stone (precast) ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Reinforced cement concrete M15 grade kilometer stone ( 200 m stone (precast)) of standard design as per IRC:8-1980, fixing in position including painting and printing etc ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012. 60 cm equilateral triangle ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Centering for Culverts (Head walls) ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6. 1000mm dia ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet equirement of table No. 300-2 ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet equirement of table No. 300-2 ---- Including cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc., complete as per specifications & as directed by engineer-in-charge of the work