Public Works Department Tender

Item10.1 vol-lllP.No91 - Restoration of Rain Cuts Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width,laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes,(Rate Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item10.2vol-lllP.No91 - Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment. (Rate Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item10.15(i) vol-lllP.No93 - Patching of Shallow Potholes using SDBC Gr II 25 mm thick Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The Cost is inclusive of removing the failed materials & cleaning on the road surface, preparation of potholes to the required standards sizes before patching them and application of tack coat at 0.20 kg/m2 over the asphalt surface including lead, loading unloading, rolling and finishing etc., complete as per specification. (Rate Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item10.15(ii) vol-lllP.No93 - Patching of Deep Potholes 75mm thick by restoring the Granular Base course using material confirming to WBM Grade -I with B type Screenings standards wherever necessary by manual means including trimming the pothole to the required shape and size, cleaning the pothole, applying Prime Coat (SS1) at 0.70 kg per m2 over the WBM surface and covering the surface with SDBC 25mm thick including lead, loading unloading, rolling and finishing etc., complete as per specification. (Rate Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item16.26 vol-lllP.No148 - White washing of parapet walls of CD work and tree truncksWhite washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1916, (Rate Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item16.20(I)vol-lllP.No147 - Maintenance of Culverts Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1909,(Rate Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item16.24(i) vol-lllP.No148 - Maintenance of 200 m & km stones by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 m & km stone and 5th km stone as per drawing and technical specification.Painting two coats with synthetic enamel paint(Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item8.43 vol-lllP.No74 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.(Including 18% GST). ---- Work should be carried out as per the direction of engineer incharge of work.

Item8.15 vol-lllP.No67 - Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glassbeads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(Including 18% GST)." ---- Work should be carried out as per the direction of engineer incharge of work.

Item8.6(iv)vol-lllP.No67 - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approveddrawing.The sign shall be maintained as per section 12 of IRC:67:2022.( iv ) 60 cm equilateral triangle (Including 18% GST)." ---- Work should be carried out as per the direction of engineer incharge of work.