Public Works Department Tender

Vol-2 P No:48 It No: 8.40 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Vol-2 P No:48 It No: 8.40 ) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:59 It No: 9.6.1 - Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement (Vol-2 P No:59 It No: 9.6.1) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:131 It No: 14.3.1 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :14.3.1 W.C. pan with ISI marked white solid plastic seat and lid (Vol-2 P No:131 It No: 14.3.1) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:133 It No: 14.10.1 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 14.10.1.1 510x1040 mm bowl depth 250 mm (Vol-2 P No:133 It No: 14.10.1) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

P. No.38, I.No.9.2.2, Vol-6 - Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 1.5 kVA OFF LINE UPS (P. No.38, I.No.9.2.2, Vol-6) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

P. No.38, I.No.9.4.6, Vol-6 - Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.9.4.6 150 AH capacity (P. No.38, I.No.9.4.6, Vol-6) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:136 It No: 14.32.2 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 14.32.2 Rectangular shape 453x357 mm (Vol-2 P No:136 It No: 14.32.2) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

It No 4 - DINING TABLE:- Supplying of Dining table of size 1.8x1.2m made out of well seasoned good quality Burma teak wood legs of cross section 100x100 mm at top and 75x75mm at bottom side bars of Burma teak wood of cross section 100x50 mm. All Burma teak wood is polished with two coats of melamine polish in spray semi matt finish with necessary compressor, staining to match with teak wood after sanding ,finishing etc,. complete. The work include cost of all materials, cost of labour, equipment and machineries, lead and lift, loading and unloading, transportation charges etc, complete as per the direction of Engineer-in-charge of the work. (data Rate approved letter No 10890 It No 4 ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

It No 4 - DINING CHAIR :- Supplying of Dining Chair made out of well seasoned good quality Burma teak wood legs of cross section 50x50 mm and back side legs of cross section 75x75mm with tapered with side bars of Burma teak wood of cross section 75x50 mm and 4no's of 25x25mm patties set back rest and 25x25 mm patties at below seat. High density polyurethane foam cushions for the seat and upholstered in good quality fabric with 19mm thick BWP board over cushion in fixed. All Burma teak wood is polished with two coats of melamine polish in spra semi matt finish with necessary staining to match with teak wood after necessary sanding, finishing, including providing heavy duty bushes at bottom of legs. The work include cost of all materials, cost of labour, equipment and machineries, lead and lift, loading and unloading, transportation charges etc, complete as per the direction of Engineer-in-charge of the work (data Rate approved letter No 10890 It No 4 ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:217 It No: 22.6 - Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessarynails,screws etc. complete as per direction of Engineer-in-charge. (Vol-2 P No:217 It No: 22.6) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:217 It No: 22.3 - Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade marine ply as per IS 710 of approved brand complete as per direction of engineer in-charge.(Payment for providing and fixing auto closing hinges shall be paid separately) (Vol-2 P No:217 It No: 22.3) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:218 It No: 22.8 - Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work (Vol-2 P No:218 It No: 22.8) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:218 It No: 22.10 - Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge (Vol-2 P No:218 It No: 22.10) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:218 It No: 22.9a - Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in charge. a 200mm length (Vol-2 P No:218 It No: 22.9a ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

P. No.201, I.No.20.39 Vol-2 - Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)-.(P. No.201, I.No.20.39 Vol-2) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

P. No.201, I.No.20.42 Vol-2 - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-.(P. No.201, I.No.20.42 Vol-2) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:125 It No: 13.31.2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal tability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 20 mm nominal dia Pipes (Vol-2 P No:125 It No: 13.31.2 ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

Vol-2 P No:117 It No: 13.2.2 - Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (Vol-2 P No:117 It No: 13.2.2) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

vol-6 P no 69 It no1.1.1 - Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick (vol-6 P no 69 It no1.1.1) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

vol 6 P no 05 It no 2.3.3 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS 694:2010 2.5 mm2 . (vol 6 P no 05 It no 2.3.3) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

vo6 P no 09 It no3.6.1 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch.(vo6 P no 09 It no3.6.1) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

vol-6 P no 09 It no3.6.3 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket.(vol-6 P no 09 It no3.6.3) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

page no:a-30, I.No.6.3,2 Vol-6 - Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bearing system.6.3.2 56" Sweep (1400 mm) Regular model (page no:a-30, I.No.6.3,2 Vol-6) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

vol-6 P no46 It no 11.10.2 - Supplying & fixing of Surface mounting type retrofit type -LED tube W Comprising of LED linear source with CCT 6500 degree K. CRI Greater than 70% efficiency greater than 80 limen per W.life greater than 25000 burning hours and compliance to IS10322/IEC 60598. LM 79& LM 80. the LEd are drievn by HF electronic driver ointegratedb in the system with PF greater than 0.95. power loss should less than 5% of lamp wage. short circuit and open circuit protection to be integrated in the circuit. THD less than 20%. life as per LM 79. the oporating input voltage shpud be between 130 to 275 V . BIS approved and tested by NABL/CPRI accredited laboratory with 2 years warrenty 18W-20W(T8)(vol-6 P no46 It no 11.10.2) ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.

vol-6 P no47 It no 11.11.5 - Supplying and fixing of retrofit type-LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70% ,efficacy greater than 80 lumen per W,life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598,LM 79 & LM 80.The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, Power loss should less than 5% of lamp wage.,short circuit & open circuit protection to be integrated in the circuit.THD less than 20% life LM79.The operating input voltage should be between130 to 275V.BIS approved and tested by NABL/CPRI accreliated laboratory with 2years Warranty against any manufacturing defect working under standard electrical condition.12W,6500K ---- All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work.